danofarlington
My Mail is Forwarded Here
- Messages
- 3,122
- Location
- Arlington, Virginia
No, could be either.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
The BORSALINO BROTHERHOOD
- Thread starter Dakota Ellison
- Start date
Grizzly Adams
A-List Customer
- Messages
- 360
- Location
- New Mexico
Just picked up a Borsalino Mascotte. Anyone know anything about this model?
EggHead
Practically Family
- Messages
- 858
- Location
- San Francisco, CA
I thought I could make it look like an Italian Raiders Fedora, but the crown wasn't full enough.
So here it is:
Color: medium-light brown, OC 6", brim 2 3/4", Cavanagh edge
Inside found a couple of paper labels, one said:
772 45693
Averia Assab - Gorasqu (I think that's what it says)
The other: $20
I don't know the year, but thinking around 1950?
Borso head shot
head sideshot
In the vintage spirit, I used a vintage Pentax lens for the below
SMC 50/2 Manual
Note: focusing manually is a $$@^#^! So typically I stick with DA pancake lenses.
..and as M. Kahn has exclaimed - It's tvue, it's tvue! I can say that what is said about vintage Borsalinos is true - felt soft and malleable, conforms to shape quickly, hat is light and comfortable.
So here it is:
Color: medium-light brown, OC 6", brim 2 3/4", Cavanagh edge
Inside found a couple of paper labels, one said:
772 45693
Averia Assab - Gorasqu (I think that's what it says)
The other: $20
I don't know the year, but thinking around 1950?
Borso head shot
head sideshot
In the vintage spirit, I used a vintage Pentax lens for the below
SMC 50/2 Manual
Note: focusing manually is a $$@^#^! So typically I stick with DA pancake lenses.
..and as M. Kahn has exclaimed - It's tvue, it's tvue! I can say that what is said about vintage Borsalinos is true - felt soft and malleable, conforms to shape quickly, hat is light and comfortable.
Last edited:
Nice one, Egghead.
It's Gorasgu, by the way. That's the model name - one of those fantasy names that Borsalino came up with.
1950s is probably right, provided the paper sticker behind the sweat doesn't have the Borsalino logo on it (that would put it pre-1952 or thereabouts).
It's Gorasgu, by the way. That's the model name - one of those fantasy names that Borsalino came up with.
1950s is probably right, provided the paper sticker behind the sweat doesn't have the Borsalino logo on it (that would put it pre-1952 or thereabouts).
randooch
I'll Lock Up
- Messages
- 4,864
- Location
- Ukiah, California
Nice one, Egghead! Good proportions on you: Pentax doesn't lie!
Last edited:
Featured products
-
John Lofgren Monkey Boots Shinki Horsebuttt - $1,136 The classic monkey boot silhouette in an incredibly rich Shinki russet horse leather. -
Grant Stone Diesel Boot Dark Olive Chromexcel - $395 Goodyear welted, Horween Chromexcel, classic good looks. -
Schott 568 Vandals Jacket - $1,250 The classic Perfecto motorcycle jacket, in a very special limited-edition Schott double rider style.
mikespens
Call Me a Cab
- Messages
- 2,913
- Location
- Tacoma, Wa
It's a great hat Egghead but the fact it cost $20 puts it into the exceptional category. Congrats!
davidraphael
Practically Family
- Messages
- 782
- Location
- Germany & UK
Thanks, Rabbit, for the tip about the pre-1952 Bors logo appearing on the white label. Helps me to better tie down a date.
- Messages
- 15,271
- Location
- Buffalo, NY
There are quite a few posted in this thread and others on the Fedora Lounge.
Grizzly Adams
A-List Customer
- Messages
- 360
- Location
- New Mexico
Thanks, Alan. Need to refine my search skills.
Missed most first time around.[huh]
Missed most first time around.[huh]
Purplesage
One Too Many
- Messages
- 1,995
- Location
- Boulder, CO
I need help dating this Borsalino. I recently purchased it at a very reasonable price. It arrived with the wind trolley cord being damaged but I can live with that for what I paid for it. Other than a couple of very insignificant moth nibs the felt is in very good shape. The inside liner is a bit faded or washed out looking. The stitching on the sweatband is coming loose in a couple of places and the leather is showing it's age. The hat has a 5 1/4" crown with center dent, 1 3/4" overwelt brim. I'm guessing the hat is from at least the 40s or older. I am curious about the short brim. I actually don't mind it because it looks good with the high crown.
Last edited:
Purplesage
One Too Many
- Messages
- 1,995
- Location
- Boulder, CO
Here are a few more photos showing the underside of the brim, sweatband and liner. I figure there are enough photos for the experts to come to some conclusions.
Chepstow
I'll Lock Up
- Messages
- 5,406
- Location
- Germany/ Remscheid
Egghead and Purple, nice ones. congrats to your Borsalinos.
Purplesage, if you look up the last four pages or so, there's several references to the Borsalino size sticker and lots of images of the old stickers.
The old stickers:
Pre-1952 or thereabouts: With Borsalino logo on the left
ca. 1952 to ca. 1960 or thereabouts: Same one without the logo
The more recent stickers:
1960s onward: changing fonts and paper used for the sticker.
The old stickers:
Pre-1952 or thereabouts: With Borsalino logo on the left
ca. 1952 to ca. 1960 or thereabouts: Same one without the logo
The more recent stickers:
1960s onward: changing fonts and paper used for the sticker.
Purplesage
One Too Many
- Messages
- 1,995
- Location
- Boulder, CO
Here is a photo of the paper tag. I had to be careful pulling the sweatband back because I didn't want to pop any threads. There is no Borso logo. It's kind of hard to read. I have a couple of nice Diamantes with 1 3/4" brims but this hat looks much older. The sweatband is pretty thick as well. When do you think this hat was made if it could be narrowed down to a decade anyway?
It's the sticker that was used from sometime in the early/mid fifties throughout that decade, and possibly up to the early sixties. So, mid to late fifties most likely.
Purplesage
One Too Many
- Messages
- 1,995
- Location
- Boulder, CO
Thanks
Borsalino 1950s Ecosca - Palladio c. nero (European market) Qualità Extra Extra Superiore
This is going to be a favorite of mine. Bobbi, I'll post a picture of humble self wearing it when I get the chance (won't be long). Thank you again!
When this one arrived, the brim width was rather uneven and the edge was, although cut very smoothly, not sanded down. A trimming job but without sanding afterwards, I suppose. I had to even out the brim anyway (left/ right side uneven etc), so I reduced it slightly to an even 2 3/8" measured from above. The brim is now perfectly even all around.
After trimming:
This is going to be a favorite of mine. Bobbi, I'll post a picture of humble self wearing it when I get the chance (won't be long). Thank you again!
When this one arrived, the brim width was rather uneven and the edge was, although cut very smoothly, not sanded down. A trimming job but without sanding afterwards, I suppose. I had to even out the brim anyway (left/ right side uneven etc), so I reduced it slightly to an even 2 3/8" measured from above. The brim is now perfectly even all around.
After trimming:
bond
My Mail is Forwarded Here
- Messages
- 3,537
- Location
- Third coast
Nic i was curious how much you trimmed off ?
Well, the brim was 2.5" in front, 2 3/4+" at the back, 2 5/8" at the left side and 2 3/4" at the right side, measured from above. It's not unusual that the back is intentionally wider than the front (depending on flanging), but the 1/4+" difference was a bit too much.
I did a first trim down to 2.5", but due to the flanging it looked much wider than that; I then proceeded to cut it down to a 2 3/8". This width works best for me; depending on flanging a 2.5" or 2 5/8" is fine, too.
Btw, the trimmed, un-sanded brim edge looked exactly like the "original" edge. [huh] Needless to say that sanding the edge gave it a much better appearance.
