Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Aero? Simmons Bilt? Looking for my "Forever Leather Jacket"

TartuWolf

One Too Many
Messages
1,162
Location
Tartu, Estonia
Last info I got from Aero that they currently only have Cherry and Black CXFQHH in lighter weight / thickness. And that it is not expected that any other colors will ever arrive in lighter weight/thickness, because the previous ones were errors/mistakes.
 

trainspotter

A-List Customer
Messages
467
Please show :) Especially the cherry
Here it is
20230307_142033~2.jpg
 

Hide'n'seek

One of the Regulars
Messages
283
Location
Scotland
We have plenty
Last info I got from Aero that they currently only have Cherry and Black CXFQHH in lighter weight / thickness. And that it is not expected that any other colors will ever arrive in lighter weight/thickness, because the previous ones were errors/mistakes.
We don't have any Cherry left and very little thinner Black. We do have plenty of Black Chrxl in stock and as has always been the case a request can be made when ordering for the cutters to choose lighter weight skins . This simply means that we will select the lightest from the current batch.
For clarity the lighter skins we had were from a couple of batches we received during a time when Horween were having trouble sourcing Raw hides of a suitable quality for Chromexcel. We did not specify these light skins, and they are not a regular offering. But as above we have always been able to selct lighter / or heavier skins on request ( this is from what ever batch we happen to have in stock at the time of cutting)
 

TartuWolf

One Too Many
Messages
1,162
Location
Tartu, Estonia
@Hide'n'seek
Thank you clarification!
In case of normal thickness cxl hh, what's the usual range/variation in case customer specifies thinner/thicker?
For example ~1.3mm thinner and ~1.5mm thicker?
I ordered thinner brown and my order just went to production, what thickness can I expect?
 

Hide'n'seek

One of the Regulars
Messages
283
Location
Scotland
@Hide'n'seek
Thank you clarification!
In case of normal thickness cxl hh, what's the usual range/variation in case customer specifies thinner/thicker?
For example ~1.3mm thinner and ~1.5mm thicker?
I ordered thinner brown and my order just went to production, what thickness can I expect?
Yours is going to be around the 1.3mm mark.

Check your mails as i have a couple of queries regarding your order
 

Chilliwack

Familiar Face
Messages
51
Location
Canada
Weight loss update: I went back to the local leather store (the bad one) just to see if I'd gone down a size.
With some variation on jackets, I have indeed gone from XXL to XL! But XL jackets are still a little bit snug, and the sleeves are too long.

So yeah, looks like I still got a ways to go. But I'm slowly but surely getting there! 30 more pounds lost ought to do it.
 

Chilliwack

Familiar Face
Messages
51
Location
Canada
UPDATE: Turns out my jacket wasn't Aero or SB. It was............ something else.

I could not find any branding on it whatsoever. I looked everywhere. Must be custom-made. But it certainly is old and high quality, since it was apparently labeled as being from the 1970s. This jacket is older than me! I got it in Atlanta when I was visiting some friends. Got it in a used vintage clothing store. I NEVER would have found a jacket this nice in my town. And certainly not for a mere $280!

This is also a good chance to show more progress on my weight loss journey. Down to 222 lbs now, and I believe I have reached my "end size" area. Even if I slim down to 200, my shoulder width marks me as an XL. It's just about a perfect fit, and will be an even better fit as I continue to slim down. Shoulders are the exact right width, hangs on all the right places, has the cross zip look I enjoy, but without that annoying belt.

Only got a few minor issues though:

- It's a little snug on my belly. But that will not be an issue as I continue to slim down.

- The sleeves are WAY too long, hanging past my fingertips. Whoever previously owned this jacket must have been some sort of orangutan. I'll be taking it to a local leather expert to get the sleeves shortened. You can see how the sleeves bunch up around my elbows.

- The zippers need fixing. The teeth are perfectly fine, the sliders move well. But the pull tabs are straight-up broken at the loops. Can't even put new ones on. Easily fixed by an expert.

- The lining is ancient and ragged. I'll get the polyester replaced with cotton. What color, I'm not sure. I'm thinking dark red, like what you'd find at Schott.

Might cost another couple hundred in total to get this all dealt with, but it's still better than paying $2000 for a brand new one that might not even fit me properly. I was really lucky to find this.


I've since done some restoration on the jacket. Applied some leather conditioner (it was very much needed), and I gave it a coat of black Urad to make it more element-proof. I'm just letting it dry out entirely before I post any photos of the restored state.

I'll kind of miss the intensely weathered look, but I'd rather keep this jacket healthy for as long as possible. And it will weather again with time.

Any thoughts?
 

Attachments

  • 20240510_214036.jpg
    20240510_214036.jpg
    230 KB · Views: 123
  • 20240505_180152.jpg
    20240505_180152.jpg
    649.5 KB · Views: 126
Last edited:

newtojackets

Practically Family
Messages
960
UPDATE: Turns out my jacket wasn't Aero or SB. It was............ something else.

I could not find any branding on it whatsoever. I looked everywhere. Must be custom-made. But it certainly is old and high quality, since it was apparently labeled as being from the 1970s. This jacket is older than me! I got it in Atlanta when I was visiting some friends. Got it in a used vintage clothing store. I NEVER would have found a jacket this nice in my town. And certainly not for a mere $280!

This is also a good chance to show more progress on my weight loss journey. Down to 222 lbs now, and I believe I have reached my "end size" area. Even if I slim down to 200, my shoulder width marks me as an XL. It's just about a perfect fit, and will be an even better fit as I continue to slim down. Shoulders are the exact right width, hangs on all the right places, has the cross zip look I enjoy, but without that annoying belt.

Only got a few minor issues though:

- It's a little snug on my belly. But that will not be an issue as I continue to slim down.

- The sleeves are WAY too long, hanging past my fingertips. Whoever previously owned this jacket must have been some sort of orangutan. I'll be taking it to a local leather expert to get the sleeves shortened. You can see how the sleeves bunch up around my elbows.

- The zippers need fixing. The teeth are perfectly fine, the sliders move well. But the pull tabs are straight-up broken at the loops. Can't even put new ones on. Easily fixed by an expert.

- The lining is ancient and ragged. I'll get the polyester replaced with cotton. What color, I'm not sure. I'm thinking dark red, like what you'd find at Schott.

Might cost another couple hundred in total to get this all dealt with, but it's still better than paying $2000 for a brand new one that might not even fit me properly. I was really lucky to find this.


I've since done some restoration on the jacket. Applied some leather conditioner (it was very much needed), and I gave it a coat of black Urad to make it more element-proof. I'm just letting it dry out entirely before I post any photos of the restored state.

I'll kind of miss the intensely weathered look, but I'd rather keep this jacket healthy for as long as possible. And it will weather again with time.

Any thoughts?
All those changes would cost a fair amount, and I think the jacket is a bit too big on you. I’d probably just searched for another used / vintage jacket with a closer fit
 

Chilliwack

Familiar Face
Messages
51
Location
Canada
All those changes would cost a fair amount, and I think the jacket is a bit too big on you. I’d probably just searched for another used / vintage jacket with a closer fit
Well it does LOOK a bit big on me now, but that's because I have it OPEN In both pics. And because I'm still a bit heavy, it's sort of "pushed out" a bit. I have at least 20 more pounds to drop. And some chest muscles to develop.

And like I said, I'll need to get the sleeves shortened. That's the main reason it looks too big on me. Trust me, I've looked ALL OVER for a good vintage jacket, and I can't trust anything online until I get down to my ideal size.

As for the cost... yeah it will cost a fair amount, but that's the price I was quoted at a tailor, about $200 or so.
 
Last edited:

TartuWolf

One Too Many
Messages
1,162
Location
Tartu, Estonia
Looks too big, even in the shoulders. But as always - if you want proper feedback - provide proper fit pics. Otherwise enjoy your jacket!
 

Forum statistics

Threads
109,092
Messages
3,074,006
Members
54,091
Latest member
toptvsspala
Top