- Messages
- 14,392
- Location
- Small Town Ohio, USA
Jack, you really do live as most of us only dream, my friend.
Mojave Jack said:Can you blame them for biting people that mess with them?!
This was all they had in stock! We tend to only get the sidewinders on Mainside, though we do get some speckled rattlesnakes close in, but they prefer the rockier areas. Most of the Mainside area is sandy, so the sidewinders are right at home.Nick Charles said:couldn't find anything bigger Jack?
I asked Kalinn who you were and she said Indiana Jones.
Oh, if only you saw the hours I spend at my desk! lol But thanks, just the same! Not very exciting there, I'm afraid! The snake calls are fun, and really give me an adrenaline rush. Normally the biologists handle those, but there was only one bio in at the time, and he had to go do a brief. I'm the backup snake guy.scotrace said:Jack, you really do live as most of us only dream, my friend.
warbird said:Somewhere a while back I seem to recall a thread about favorite adventure books, but I can't find it. Anybody else remember it?
I am heading to Africa soon, probably in the fall. I wanted to read a few things before I go. Outside of Hemingway that is, I have read all those a hundred times.
I haven't spent time in south Africa the country or the area in 20 years, so I will be getting some new gear before going too. I would like to go to Zimbabwe, where my grandmother lived for 30 years, but I don't think it's safe. Maybe someday I can go back there again.
"WHAT TO WEAR IN CAMP
Campers are sometimes advised to wear an old business suit on their outings on the theory that it's broken in and comfortable. Trouble is, too often such a suit is broken-down and ready to let go in a dozen spots, and you won't have much fun in the woods with your knees coming through the legs of your trousers - or the seat in a too-obvious state of disrepair. Remember, you put a good deal more stress and strain on your clothing when you're out camping,and a business suit usually isn't up to the job.
Few campers fall for the business-suit advice more than once. Next time they go on a trip they wear garments made especially for outdoor service. There are so many styles available, many at very modest prices, that no one need go camping without clothing designed to meet every emergency."
ShoreRoadLady said:Love this thread.
I found a book called "Outdoor Life Cyclopedia" at a used book sale, printing date 1945, published by Outdoor Life. There's plenty of information on fishing, shooting, hunting, dog training, camping, tips on pack train expeditions (!), building a log cabin, and...camping clothing. I thought you guys might find this excerpt interesting:
"WHAT TO WEAR IN CAMP
Campers are sometimes advised to wear an old business suit on their outings on the theory that it's broken in and comfortable. Trouble is, too often such a suit is broken-down and ready to let go in a dozen spots, and you won't have much fun in the woods with your knees coming through the legs of your trousers - or the seat in a too-obvious state of disrepair. Remember, you put a good deal more stress and strain on your clothing when you're out camping,and a business suit usually isn't up to the job.
Few campers fall for the business-suit advice more than once. Next time they go on a trip they wear garments made especially for outdoor service. There are so many styles available, many at very modest prices, that no one need go camping without clothing designed to meet every emergency."
Should anyone be interested in what they recommended, I can scan the pages later, once I hit 15 posts and can post pictures.
LordJohnRoxton said:Has anyone here seen the American Mountain Ski Boots put out by What Price Glory? I'm wondering if they are any good.
Funny you should post this today, Mike. I was just about to PM you and ask how they were working out. I suspect the pair that I had that started to come apart was just a bad batch or something, and I've been considering these again. The pair I originally had started to lose chunks from the sole within a week or two, and the sole started separately from the canvas along the upper edges. I assume form your post that you haven't had either of those things happen?Mike K. said:Jambo bwanas!!
Way back when, we discussed the Orvis navy seal boot. I wanted to revive this discussion in order to post an updated review and a useful modification.
I purchased a pair of these canvas boots a few months ago and they have since been my daily work boots. Now those of you who know me personally know that my job puts some serious demands on clothing and gear. My boots are routinely subjected to everything encountered in habitats ranging from wet & swampy to dry & near-desert like. My footwear must remain cool, be abrasion/cut resistant, dry quickly, not fall apart or shrink terribly after getting wet, and most importantly - be comfortable. Well, so far the canvas Orvis boots fit the bill.
Here's a few things others should know about prior to ordering. The latest version of the navy seal boot offered by Orvis is made by Palladium. Quality is high. The rubber outsoles flex substantially and give you a good feel for the ground, but are made with good-quality rubber that doesn't get chewed up by rough terrain (the deep heel treads do tend to pick up small rocks however). **One thing everyone should be aware of - these boots run small.** You need to order a size larger than you normally wear. This is especially important if there's a chance you'll get the boots wet. Although they don't shrink excessively, the are made of cotton canvas so they will shrink some. I recommend wearing these boots with light to medium weight socks. Insoles can be removed and replaced if wanted. An extra set of laces (probably will never be needed) is included with your purchase. Unlike most footwear, these boots do not have any built-in structural support; the canvas is soft all over. The rubber outsole does extend over the toe area to offer bump protection; however, the heel is a different story. After just several days of wear, I noticed the heels beginning to collapse. Since there is no real heel counter to offer support, the softness of the canvas allows the heel to bend and crease. This can create enough of a crease on the inside of the boot to potentially make a hot spot or blister (for me it was mostly just an annoyance). **Allow me to suggest one minor modification.** If you would like some extra heel support, get yourself a couple of tubes of super glue (the liquid type, not the gel). Prior to wear, open up the laces and pull back the tongue so you can access the boot interior. Apply a thin film of super glue to the inside heel area (you may need to smear it around a bit) and make sure it soaks in and wets the canvas. Let the glue harden. Once completely dry and cured, you will have a nice hard/structured heel to your boots that will not be affected by water. You might want to lightly sand the glue area if it feels somewhat rough. I hope this review is helpful to everyone!
The sole on mine seems quite solid. The rubber isn't nearly as hard as that on my old hiking boots or my wildland firefighting boots, but it also isn't as soft as on my sneakers. I've been trampling around in some really awful $%#! and had to put the Orvis boots through the laundry machine twice (just don't put 'em in the dyer...use a fan instead). I figure if that doesn't cause the sole to separate, nothing will.Mojave Jack said:The pair I originally had started to lose chunks from the sole within a week or two, and the sole started separately from the canvas along the upper edges. I assume form your post that you haven't had either of those things happen?
Mike K. said:Jambo bwanas!!
Way back when, we discussed the Orvis navy seal boot. I wanted to revive this discussion in order to post an updated review and a useful modification.
I purchased a pair of these canvas boots a few months ago and they have since been my daily work boots. Now those of you who know me personally know that my job puts some serious demands on clothing and gear. My boots are routinely subjected to everything encountered in habitats ranging from wet & swampy to dry & near-desert like. My footwear must remain cool, be abrasion/cut resistant, dry quickly, not fall apart or shrink terribly after getting wet, and most importantly - be comfortable. Well, so far the canvas Orvis boots fit the bill.
Here's a few things others should know about prior to ordering. The latest version of the navy seal boot offered by Orvis is made by Palladium. Quality is high. The rubber outsoles flex substantially and give you a good feel for the ground, but are made with good-quality rubber that doesn't get chewed up by rough terrain (the deep heel treads do tend to pick up small rocks however). **One thing everyone should be aware of - these boots run small.** You need to order a size larger than you normally wear. This is especially important if there's a chance you'll get the boots wet. Although they don't shrink excessively, the are made of cotton canvas so they will shrink some. I recommend wearing these boots with light to medium weight socks. Insoles can be removed and replaced if wanted. An extra set of laces (probably will never be needed) is included with your purchase. Unlike most footwear, these boots do not have any built-in structural support; the canvas is soft all over. The rubber outsole does extend over the toe area to offer bump protection; however, the heel is a different story. After just several days of wear, I noticed the heels beginning to collapse. Since there is no real heel counter to offer support, the softness of the canvas allows the heel to bend and crease. This can create enough of a crease on the inside of the boot to potentially make a hot spot or blister (for me it was mostly just an annoyance). **Allow me to suggest one minor modification.** If you would like some extra heel support, get yourself a couple of tubes of super glue (the liquid type, not the gel). Prior to wear, open up the laces and pull back the tongue so you can access the boot interior. Apply a thin film of super glue to the inside heel area (you may need to smear it around a bit) and make sure it soaks in and wets the canvas. Let the glue harden. Once completely dry and cured, you will have a nice hard/structured heel to your boots that will not be affected by water. You might want to lightly sand the glue area if it feels somewhat rough. I hope this review is helpful to everyone!
nobodyspecial said:I may have the wrong thread, but I recall someone looking for moleskin knickers.
http://www.sportsmansguide.com/sear...fault.asp+KW+Box&s=SEARCH&a=search&k=knickers