Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

My First Trouser Project

Nick D

Call Me a Cab
Messages
2,166
Location
Upper Michigan
When was the Coffin book produced? Nick, you make your back pockets with the big welt too?

I think it was first published in 2009. I also use Cabrera, I found the jacket directions especially useful. I haven't read Poulin, I'll have to find him on ILL (though I have seen his jacket pocket directions).

No, I double welt my flap pockets, I started doing that after reading the jacket making thread on the Cutter and Tailor forum. Here's a pocket before and after the flap, you can see the pocket bag at the top with the edge turned in to give an idea of width.

DSC07277_zps866ebaee.jpg

DSC07278_zps88046574.jpg
 

herringbonekid

I'll Lock Up
Messages
6,016
Location
East Sussex, England
I think hbk uses Cabrera as his basic go-to book.

i do, but i find it very confusingly described and illustrated. the whole thing could have been made much simpler to follow.
i also don't follow the book's methods to the letter by any means, but use it as something to take the bits i like from.

i don't bother with the top welt / jet when doing rear flapped pockets.
 

GBR

One of the Regulars
Messages
288
Location
UK
Why do you put flaps on your back pockets - they always seem to me to be ugly appendages.

I appreciate that certain UK tailors still use them and fashion troops them out 'for a change' over last season but voluntarily I would not have them unless trying to create a period look
 

Annixter

Practically Family
Messages
783
Location
Up Yonder
Why do you put flaps on your back pockets - they always seem to me to be ugly appendages.

I used a flap this time because I've never made a pocket and wanted to experiment with flaps and welts at the same time to see what I liked and how the process works. I think mine is nice and ugly, but I think one done well like Nick's can be attractive. To each his own I suppose.
 

Annixter

Practically Family
Messages
783
Location
Up Yonder
Could you show a pic of the inside of the side pocket? I don't think you need to deepen the pocket, just alter how much allowance you're leaving at the top. I make the side pockets poke above the waist seam just 1/4-1/3". This is sufficient to secure in the waistband, the lingin of which will project approx 1/8" below this waist seam. What size is the pocketing you cut before starting to assemble? Poulin advises starting with a 14" square.

Thanks for the Poulin info. Here's a picture of the side pocket. I was shy your 14" once I raised the pocket to completely meet the waistband seam allowance and didn't realize that there would be an issue until well into basting and sewing the pocket. (Note that I used dark thread to easily see my stitches for referencing placement/issues/etc.)

 

Annixter

Practically Family
Messages
783
Location
Up Yonder
Today I completed the button fly closure and joined the fronts. I think I need to lengthen the sew-on fly pattern about 1" so that it curves down into the crotch further. Also, I had trouble aligning the straight of grain for the underlap piece, as you can see. I cut the fabric on the straight of grain, but once I mated it to the front and pressed it open, it changed the angle. I think next time I'll have to rest the front over the uncut fabric and then pin the pattern.

 
Last edited:

Annixter

Practically Family
Messages
783
Location
Up Yonder
Yes, everything is topstitched, and the fronts are sewn together from the bottom of the fly down to the point.
 

Fastuni

Call Me a Cab
Messages
2,277
Location
Germany
While back pockets are decorative , I also greatly like trousers without them (comfortable).
Particularly more "elegant" suit trousers, where the rear is covered by the jacket anyway.

It's something different with more casual trousers used for combinations or leisure shirts - here I prefer back pockets.

SAM_3197.jpg
 
Last edited:
Hmmm, you'll be able to tell us, but this might create an awkward amount of fabric flapping around when you're trying to finish the long seams and waistband. Most guides I've seen have the "central seam" from crotch nick to top rear waistband done in one and almost the final operation. It will almost certainly make the fork manipulations more difficult.

Yes, everything is topstitched, and the fronts are sewn together from the bottom of the fly down to the point.


Re: rear pockets, I like a flapped rear pocket aesthetically. I also use the rear pockets on my trousers.
 

Nick D

Call Me a Cab
Messages
2,166
Location
Upper Michigan
Most guides I've seen have the "central seam" from crotch nick to top rear waistband done in one and almost the final operation. It will almost certainly make the fork manipulations more difficult.

In this pattern the direction is to sew the fronts together from the inseam edge to the bottom of the fly before putting in the fly (which is a zip in the original) or anything else.
 

Forum statistics

Threads
109,129
Messages
3,074,680
Members
54,104
Latest member
joejosephlo
Top