Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Going Atomic With Dalton

Messages
19,434
Location
Funkytown, USA
It's nice when the wife sez "Wow!" I'm gonna say WOW too! Is it my size now?

Your size is my size, so yeah. I had mixed results with resizing the three 7 1/8s up. That blue Waverly fits like a glove now. The Dalt-o-Liner (TommyK named it) is a little snug, but conforms pretty well after a short wear. The sage one is somewhere in between. The tan one is a 7 1/4, and Mr. Miller professionally resized the OR clone from 7 3/8 to 7 1/4.

Of course, you've mentioned you like yours a little roomy, so YMMV.
 

Bob Roberts

I'll Lock Up
Messages
11,201
Location
milford ct
Your size is my size, so yeah. I had mixed results with resizing the three 7 1/8s up. That blue Waverly fits like a glove now. The Dalt-o-Liner (TommyK's named it) is a little snug, but conforms pretty well after a short wear. The sage one is somewhere in between. The tan one is a 7 1/4, and Mr. Miller professionally resized the OR clone from 7 3/8 to 7 1/4.
Nice stuff u got goin on there my friend. That Navy blue looks great.
 
Messages
19,434
Location
Funkytown, USA
I did some long-desired work on the unlined Dalton posted above (#28) yesterday. I'm not a big fan of felt ribbons, and given this one was a bit moth-eaten as well, I had been planning to switch it out for several months. I even had the ribbon measured and curled, sitting in the box with the hat since I put it away for the winter. Yesterday, I got to work. The new ribbon is 1" vintage grosgrain, listed as "Beige." I modeled the simple design off of my Playboys.

Picture3.jpg
Picture2.jpg
 
Last edited:

RJR

Messages
10,620
Location
Iowa
I did some long-desired work on the unlined Dalton posted above (#28) yesterday. I'm not a big fan of felt ribbons, and given this one was a bit moth-eaten as well, I had been planning to switch it out for several months. I even had the ribbon measured and curled, sitting in the box with the hat since I put it away for the winter. Yesterday, I got to work. The new ribbon is 1" vintage grosgrain, listed as "Beige." I modeled the simple design off of my Playboys.

View attachment 69433 View attachment 69434
Good looking change,nice job.
 

moontheloon

I'll Lock Up
Messages
8,592
Location
NJ
I did some long-desired work on the unlined Dalton posted above (#28) yesterday. I'm not a big fan of felt ribbons, and given this one was a bit moth-eaten as well, I had been planning to switch it out for several months. I even had the ribbon measured and curled, sitting in the box with the hat since I put it away for the winter. Yesterday, I got to work. The new ribbon is 1" vintage grosgrain, listed as "Beige." I modeled the simple design off of my Playboys.

View attachment 69433 View attachment 69434
how freakin gorgeous is that thing .....!!!

that is a dead ringer for the Playboy I wore yesterday

damn good work Jim
 
Messages
11,385
Location
Alabama
I did some long-desired work on the unlined Dalton posted above (#28) yesterday. I'm not a big fan of felt ribbons, and given this one was a bit moth-eaten as well, I had been planning to switch it out for several months. I even had the ribbon measured and curled, sitting in the box with the hat since I put it away for the winter. Yesterday, I got to work. The new ribbon is 1" vintage grosgrain, listed as "Beige." I modeled the simple design off of my Playboys.

View attachment 69433 View attachment 69434

Great job, Jim!
 

FedOregon

I'll Lock Up
Messages
5,134
Location
Oregon
I did some long-desired work on the unlined Dalton posted above (#28) yesterday. I'm not a big fan of felt ribbons, and given this one was a bit moth-eaten as well, I had been planning to switch it out for several months. I even had the ribbon measured and curled, sitting in the box with the hat since I put it away for the winter. Yesterday, I got to work. The new ribbon is 1" vintage grosgrain, listed as "Beige." I modeled the simple design off of my Playboys.

View attachment 69433 View attachment 69434
Jim, that looks great! I'm later than Bob to this party... I never realized you were such a good hand at restoring hats. Really nice work!
 
Messages
12,384
Location
Albany Oregon
I did some long-desired work on the unlined Dalton posted above (#28) yesterday. I'm not a big fan of felt ribbons, and given this one was a bit moth-eaten as well, I had been planning to switch it out for several months. I even had the ribbon measured and curled, sitting in the box with the hat since I put it away for the winter. Yesterday, I got to work. The new ribbon is 1" vintage grosgrain, listed as "Beige." I modeled the simple design off of my Playboys.

View attachment 69433 View attachment 69434
I'm enjoying this thread in it's entirety, savoring it like a fine wine. I stopped short when I saw this post! Beautiful work Jim, the ribbon work is like new. I'm impressed. Now back to the show...
 

Richard Morgan

One Too Many
Messages
1,642
Location
Central Tesxas
Here’s the Dalton I posted on What r u Wearing last night. 2.5” brim about 4 3/8” to the pinch. Sweat has been replaced and there are only the standard reorder tag and union label under it.
888d23cf1f20b54e8647172055570d6d.jpg

Tried to catch the fading light but only partly successful
5fe6ba1d345f62d99fc8717e4490441e.jpg
5d4668eef1b26e8b57d4e053e570f8d1.jpg
6d607d8c6e0e9dd38eeb537fc15033e0.jpg
24b6d7e3c1171379ebe086f8b0c899c7.jpg
1013cc709193a212caea3b122c05c2e2.jpg
22191dd85b365e5a6e7df9477bc68799.jpg
d930c9c0ae6fb39a60212371f279cf4a.jpg
136048227a28cc9df7c9b758e1d5db23.jpg

I also have a Homburg I’ll post in the next couple of days.
It seems I read Dalton went out of business in the late 40s so all their hats predate that?



Sent from my iPhone using Tapatalk
 

Richard Morgan

One Too Many
Messages
1,642
Location
Central Tesxas
Here’s the Dalton I posted on What r u Wearing last night. 2.5” brim about 4 3/8” to the pinch. Sweat has been replaced and there are only the standard reorder tag and union label under it.
888d23cf1f20b54e8647172055570d6d.jpg

Tried to catch the fading light but only partly successful
5fe6ba1d345f62d99fc8717e4490441e.jpg
5d4668eef1b26e8b57d4e053e570f8d1.jpg
6d607d8c6e0e9dd38eeb537fc15033e0.jpg
24b6d7e3c1171379ebe086f8b0c899c7.jpg
1013cc709193a212caea3b122c05c2e2.jpg
22191dd85b365e5a6e7df9477bc68799.jpg
d930c9c0ae6fb39a60212371f279cf4a.jpg
136048227a28cc9df7c9b758e1d5db23.jpg

I also have a Homburg I’ll post in the next couple of days.
It seems I read Dalton went out of business in the late 40s so all their hats predate that?



Sent from my iPhone using Tapatalk

Better pic of the liner
fc80e9fcc7b0325d52f3f4b22eb37dcf.jpg



Sent from my iPhone using Tapatalk
 
Messages
19,434
Location
Funkytown, USA
Excellent hat, thanks for updating the thread. A bit different reorder tag than I've seen before.

There is an article posted on the first page that indicates the company's assets, including the name, were sold off in 1952. While I believe mine are post-war, I also think they're from the 1945-50 range. I have seen Daltons that look like later 50s, or even 60s (smaller crowns, shorter brims, that sort of thing). However, yours is definitely out of the original shop.

Did you replace the sweatband?


Sent directly from my mind to yours.
 

Richard Morgan

One Too Many
Messages
1,642
Location
Central Tesxas
Excellent hat, thanks for updating the thread. A bit different reorder tag than I've seen before.

There is an article posted on the first page that indicates the company's assets, including the name, were sold off in 1952. While I believe mine are post-war, I also think they're from the 1945-50 range. I have seen Daltons that look like later 50s, or even 60s (smaller crowns, shorter brims, that sort of thing). However, yours is definitely out of the original shop.

Did you replace the sweatband?


Sent directly from my mind to yours.
I did not replace it, a previous owner did. I wish I had the old sweat but, unfortunately, it is long gone.
 

Forum statistics

Threads
109,316
Messages
3,078,723
Members
54,243
Latest member
seeldoger47
Top