Do try this at home: leather jacket repair tips

[PeterRocco]

Hi. Thank You. I just bought it from Amazon. Thanks for the Help.

 

[Jon Crow]

Is there any way to soften leather? This Cal has a lot of wrinkles around this collar snap, and I'm worried they may tear the hide, so I'd like to know if there's anything I can do to decrease them. The best scenario would be removing them, but I know using heat iron isn't a good idea -maybe hot steam?
View attachment 646401

Try Sapo leather oil in the tin also

 

[Marc mndt]

Here's another restoration project. It may not look like much but I've been looking for one of these for years.

This is the pic from the eBay listing.

It's a mid 40s Phillips 66 gas station attendant jacket.

More often than not these jackets are missing the patch but they're easily recognizable by the big pocket welts and the relatively high placement of the handwarmer pockets.

There are different versions of the jacket: some have a plain back, others have back gussets. Some have single pocket welts, other double. Some are horsehide, others steerhide.

The condition isn't great but the jacket has potential

Let's start with addressing the wrinkles. This method is tricky as the seams might pop and the lining may tear but AFAIK it's the only way to fix the wrinkles.

The side adjuster buckles are quite crappy, one of them is deformed. I carefully bent it back into shape using a pair of pliers.

 

[Monitor]

Here's another restoration project. It may not look like much but I've been looking for one of these for years.

This is the pic from the eBay listing.

View attachment 659112

It's a mid 40s Phillips 66 gas station attendant jacket. View attachment 659117

More often than not these jackets are missing the patch but they're easily recognizable by the big pocket welts and the relatively high placement of the handwarmer pockets.

There are different versions of the jacket: some have a plain back, others have back gussets. Some have single pocket welts, other double. Some are horsehide, others steerhide.

View attachment 659133 View attachment 659134

View attachment 659116 View attachment 659115


The condition isn't great but the jacket has potential

Let's start with addressing the wrinkles. This method is tricky as the seams might pop and the lining may tear but AFAIK it's the only way to fix the wrinkles.

View attachment 659118
View attachment 659154
The side adjuster buckles are quite crappy, one of them is deformed. I carefully bent it back into shape using a pair of pliers.

View attachment 659120 View attachment 659121

I saw this jacket in a couple of 1950's movies. Couldn't believe they used to wear leather jackets for that kind of work.

 

[Marc mndt]

There are numerous threads about how to best condition a jacket and which product to use but when the topcoat has completely worn off I simply use Saphir shoe cream.

Some of the panels were much more stretchy than others. When stretching up one of the underarm panels the leather teared .

To fix it I turned the sleeve inside out and opened up the lining.

I used a piece of deerskin to patch up the the tear from the backside. Deerskin is perfect for the job as it's strong yet very supple and stretchy.

I'm quite pleased with the result.

The pull was missing but I found it in one of the pockets.

 

[Marc mndt]

When stretching out the wrinkles the body lining teared near the collar. Not the nicest repair job I've ever done but it does the trick.

Now the finishing touch: sewing on a NOS Phillips 66 patch I found on eBay.

 

[JMax]

I enjoy your restoration posts.

 

[Monitor]

Fantastic work on repair the tear. I began sewing cuts like that. It's possible to make a near invisible repair, one that looks like a crease but you gotta be precise.

 

[Marc mndt]

Fantastic work on repair the tear. I began sewing cuts like that. It's possible to make a near invisible repair, one that looks like a crease but you gotta be precise.

With some leather filler the cut will probably become completely invisible but I'm going to leave it as is because it's already hard to tell it's there since the panel is facing the body when the jacket is worn.

 

[58panheadfan]

When stretching out the wrinkles the body lining teared near the collar. Not the nicest repair job I've ever done but it does the trick.
View attachment 659191 View attachment 659192 View attachment 659193

Now the finishing touch: sewing on a NOS Phillips 66 patch I found on eBay.

View attachment 659190 View attachment 659195 View attachment 659194

Nicely done repair job. Nevertheless, I am surprised that you are struggling with such a jacket, especially as you have an exceptional collection of excellent jackets. I for one would probably never wear a jacket with such damage (but that's more of a mindfuck story). I think it was the damage to the jacket that was the challenge and not the jacket itself.

 

[Marc mndt]

I am surprised that you are struggling with such a jacket, especially as you have an exceptional collection of excellent jackets.

I do own a lot of nice jackets but for some reason black halfbelts are much harder to come by than brown ones so this is only my second black halfbelt. I'm talking about vintage jackets of course. I could order a repro jacket today but for various reasons I kind of lost interest in repro jackets.

I only own one other black halfbelt which is this 40s Windward. But this is not a jacket for every day wearing, its shearling body and wool quilted sleeve lining make it hot like an oven, its massive shoulder pads and wide shoulders make it quite a statement piece to wear.

I for one would probably never wear a jacket with such damage (but that's more of a mindfuck story). I think it was the damage to the jacket that was the challenge and not the jacket itself.

It absolutely is about the jacket itself. If I could buy the perfect black vintage halfbelt in my size in great condition I would probably not have bothered with this one but they're just not out there. I paid more for this worn out halfbelt than I did for some of my excellent condition vintage motorcycle jackets, that's how much I wanted THIS jacket.

I didn't have an opportunity yet to take proper fit pics but here's a quick mirror selfie just to give you an idea. Isn't this jacket absolutely perfect? The Windward above is a MUCH better jacket in terms of quality but in terms of look and feel this Phillips 66 wins hands down imo.

 

[Jon Crow]

With some leather filler the cut will probably become completely invisible but I'm going to leave it as is because it's already hard to tell it's there since the panel is facing the body when the jacket is worn.

Nice, I also use leather resin/filler, if it's a fine cracked I inject it in and buff it over, after a bit of polish you can't tell

 

[PeterRocco]

When stretching out the wrinkles the body lining teared near the collar. Not the nicest repair job I've ever done but it does the trick.
View attachment 659191 View attachment 659192 View attachment 659193

Now the finishing touch: sewing on a NOS Phillips 66 patch I found on eBay.

View attachment 659190 View attachment 659195 View attachment 659194

Hi. I loved your post on this jacket. Great Job .