Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Do try this at home: leather jacket repair tips

Marc mndt

I'll Lock Up
Messages
7,304
Master class process. Friend, love your work. I was wondering if you can share more about the washing process you develop to clean the goat.
Washing such an old jacket is quite risky. The vegetable tanned leather soaks up water like a sponge. When wet the panels are much heavier which will put a lot of stress on the seams and lining. But the jacket heavily reeked of BO so there was no other option.

I hand washed the jacket in the sink using mild detergent. It's important to get the jacket completely wet, not just the smelly pits. Otherwise you'll end up with dark water marks. As you can see the water turned completely brown. That's not dirt, those are tannins that are flushed out. I was worried that I would end up with a pale jacket without any color depth so I quickly took it out of the water. Without wringing it out I let the jacket dry on the floor on top of some towels. Never hang a jacket to dry, it will deform and, in case of vegetable tanned leather, the water (and tannins) will move down towards the hem of the jacket causing dark stains.

IMG_3843.jpeg
IMG_3845.jpeg


It took three days for the jacket to dry. After two days dark stains started to form at spots where the topcoat was worn off. Luckily they eventually disappeared when the jacket was completely dry.

The weight of the water caused too much stress on the lining, which ripped apart. No biggie because it needed to be replaced anyways as it was too short for the jacket as a result of a previous repair.

When dry I applied reddish brown shoe cream to the jacket in order to give it back its luster.

IMG_3854.jpeg


I shipped the jacket to Aero Leathers to have a fresh new moleskin lining installed, plus an original Block label which was gifted to me by @Yamahana .

Julie Leitch, Aero's most experienced machinist, working on the reline. The sleeve lining was still intact so they kept that original.

BAA2EF04-CE67-4DAB-A460-2FE20F429CDF.jpeg


The end result. The jackets smells fresh and feels as solid as can be. Good to go for another 90 years :D.

FullSizeRender.jpeg
FullSizeRender.jpeg
FullSizeRender.jpeg
IMG_3355.jpeg
IMG_3354.jpeg
IMG_3346.jpeg
 

photo2u

Call Me a Cab
Messages
2,351
Location
claremont california
Inspirational. I am thinking to do the same on an original G-1 type from the late 40's. However, I still do not think I had the chops for it. One of my favorites an HD Elvis original has a smell than I have been trying to work on for more than a year with mediocre results. The jacket has a wool quilted lining. Do you think a longer water treatment might take the smell on that thick lining? Your sage advice is always welcome!
 

Harris HTM

One Too Many
Messages
1,883
Location
In the Depths of R'lyeh
Washing such an old jacket is quite risky. The vegetable tanned leather soaks up water like a sponge. When wet the panels are much heavier which will put a lot of stress on the seams and lining. But the jacket heavily reeked of BO so there was no other option.

I hand washed the jacket in the sink using mild detergent. It's important to get the jacket completely wet, not just the smelly pits. Otherwise you'll end up with dark water marks. As you can see the water turned completely brown. That's not dirt, those are tannins that are flushed out. I was worried that I would end up with a pale jacket without any color depth so I quickly took it out of the water. Without wringing it out I let the jacket dry on the floor on top of some towels. Never hang a jacket to dry, it will deform and, in case of vegetable tanned leather, the water (and tannins) will move down towards the hem of the jacket causing dark stains.

View attachment 631370 View attachment 631363

It took three days for the jacket to dry. After two days dark stains started to form at spots where the topcoat was worn off. Luckily they eventually disappeared when the jacket was completely dry.

The weight of the water caused too much stress on the lining, which ripped apart. No biggie because it needed to be replaced anyways as it was too short for the jacket as a result of a previous repair.

When dry I applied reddish brown shoe cream to the jacket in order to give it back its luster.

View attachment 631371

I shipped the jacket to Aero Leathers to have a fresh new moleskin lining installed, plus an original Block label which was gifted to me by @Yamahana .

Julie Leitch, Aero's most experienced machinist, working on the reline. The sleeve lining was still intact so they kept that original.

View attachment 631372

The end result. The jackets smells fresh and feels as solid as can be. Good to go for another 90 years :D.

View attachment 631364 View attachment 631365 View attachment 631366 View attachment 631367 View attachment 631368 View attachment 631369
I love it that you wash a leather jacket while actually wearing another leather jacket!
 

Jasonissm

Practically Family
Messages
589
Take a pencil sharpener and clean the teeth with the pencil tip. It will break many times. Sharpen the pencil again. If the teeth are bad and need a stronger cleaner. Use the pencil shaving (thin wood with lead) as aggregate to remove the more stubborn grease or wax that was previously used and preventing the zipper from running as it should. Another tip. Use tape (painter first choice) in the inner section of the zipper and lining to prevent some of that pencil and wax to mar the lining. Use a brush to remove all the gunk that will come out. Lastly, repeat a nice pencil cleaning and you will be golden.
Do you think such a process would be necessary in my instance? The zipper is not running smoothly, but looks relatively clean beside the zipper tape turning green and the brass has tarnished.

It's an unused jacket and I think it's just been sitting in a closet for a decade or so so I don't think there would be so much stuff gumming up the teeth, and the brass has tarnished but I'm not sure if there would be much dirt or other stuff in it. I was thinking of just giving it a brush with some soap and water and then applying a bit of oil or wax to lubricate it once more.
 

Canuck Panda

I'll Lock Up
Messages
4,666
unfortunately not all NOS Talons are the same quality. It's not really the jacket manufacturer's fault imo because the zipper probably didn't show anything alarming before being installed onto the jacket. You could try to do trial and error and replace with a different NOS slider first (from the top), one that you know for sure works. If it does then it's the zipper track problem, that can only be solved by replacing the zipper track. If the replacement pull works then that's really the best case scenario.
 

Marc mndt

I'll Lock Up
Messages
7,304
I love it that you wash a leather jacket while actually wearing another leather jacket!
Sharp eye!
One of my favorites an HD Elvis original has a smell than I have been trying to work on for more than a year with mediocre results.
Have you tried using an ozone machine?
The jacket has a wool quilted lining. Do you think a longer water treatment might take the smell on that thick lining?
Tough one, I never tried washing wool quilted lining. Is it rayon or nylon lined? If rayon then washing it will probably put too much strain on the material.
 

Heresiarch

New in Town
Messages
9
Hope this is an appropriate thread for my question. The lining of my Fine Creek Leon is beginning to wear off in various places. Should this be repaired, if yes: how? It doesn't bother me yet but I feel like the lining will not stay in place for long.
 

Attachments

  • 20241001_115257.jpg
    20241001_115257.jpg
    5.9 MB · Views: 41
  • 20241001_115254.jpg
    20241001_115254.jpg
    5.2 MB · Views: 37
  • 20241001_115252.jpg
    20241001_115252.jpg
    6.3 MB · Views: 39
  • 20241001_115247.jpg
    20241001_115247.jpg
    6 MB · Views: 28
  • 20241001_115245.jpg
    20241001_115245.jpg
    6.3 MB · Views: 49

Canuck Panda

I'll Lock Up
Messages
4,666
Hope this is an appropriate thread for my question. The lining of my Fine Creek Leon is beginning to wear off in various places. Should this be repaired, if yes: how? It doesn't bother me yet but I feel like the lining will not stay in place for long.
Wear it until the batting starts to fall out, then it's time for a new lining. Ripstop cotton fabric can take on a lot of wear and tear.
 

photo2u

Call Me a Cab
Messages
2,351
Location
claremont california
Wear it until the batting starts to fall out, then it's time for a new lining. Ripstop cotton fabric can take on a lot of wear and tear.
You can also do a nice corduroy fabric repair your self. Remove the tag, sew it to the new corduroy and by hand stitch it back. You can get creative and do your own take in the stitching. Looks like a fun project. I kept a pair of very thick and durable corduroy fabric from a high quality trouser I used back in the 80'. I was going to use it in a tool pouch, but then I saw a that it can also be used in heavy duty leather jackets to protect the leather collar fold at the back of the neck area. Furthermore, I have seen this added protection in Cal leathers and other vintage jackets.
 

58panheadfan

One Too Many
Messages
1,649
Location
Switzerland
Hope this is an appropriate thread for my question. The lining of my Fine Creek Leon is beginning to wear off in various places. Should this be repaired, if yes: how? It doesn't bother me yet but I feel like the lining will not stay in place for long.
Oops, how old is this jacket and what did you wear underneath that the lining already looks so worn out? Or the quality of this lining is absolute garbage.
 

Heresiarch

New in Town
Messages
9
Oops, how old is this jacket and what did you wear underneath that the lining already looks so worn out? Or the quality of this lining is absolute garbage.
I got it in 2019 but have worn it in rotation. Mostly with just a tee or flannel underneath. I'd dare say that the fabric is quite thin compared to my other jackets. And it makes me fear for the even more fragile feeling satin lining on my flat head jacket.

I added some pictures of the leather to give an indication of the wear.
 

Attachments

  • 20241001_141826.jpg
    20241001_141826.jpg
    5.7 MB · Views: 36
  • 20241001_141852.jpg
    20241001_141852.jpg
    5.6 MB · Views: 41
  • 20241001_141835.jpg
    20241001_141835.jpg
    5.9 MB · Views: 44

58panheadfan

One Too Many
Messages
1,649
Location
Switzerland
I got it in 2019 but have worn it in rotation. Mostly with just a tee or flannel underneath. I'd dare say that the fabric is quite thin compared to my other jackets. And it makes me fear for the even more fragile feeling satin lining on my flat head jacket.

I added some pictures of the leather to give an indication of the wear.
Based on the photos, the jacket has undoubtedly been “well” worn but I still feel that the lining should not be damaged in this way. This confirms my information that the Fine Creek leather jackets do not deliver what they promise. I myself had a Fine Creek leather jacket in my hands and was also not impressed with the leather. But that was a few years ago, so I don't know the current quality. Your jacket shows a nice tea core patina...
 

Canuck Panda

I'll Lock Up
Messages
4,666
You can also do a nice corduroy fabric repair your self. Remove the tag, sew it to the new corduroy and by hand stitch it back. You can get creative and do your own take in the stitching. Looks like a fun project. I kept a pair of very thick and durable corduroy fabric from a high quality trouser I used back in the 80'. I was going to use it in a tool pouch, but then I saw a that it can also be used in heavy duty leather jackets to protect the leather collar fold at the back of the neck area. Furthermore, I have seen this added protection in Cal leathers and other vintage jackets.
corduroy patch work is great. One around the neck line and one around the hem should prolong the wear. Might as well put one at the armpits as well. Fine Creek didn't use the proper nylon fabric for the face fabric either, it wore down too fast.
 

Forum statistics

Threads
109,096
Messages
3,074,060
Members
54,091
Latest member
toptvsspala
Top