Canuck Panda
I'll Lock Up
- Messages
- 4,730
Not trying to derail this thread. But Badalassi is worth the effort.
I used mink oil that was available at my local cobbler. Saphier makes real nice ones in glass jars but my guy doesn't stock them. Get that if you can, French polish are worth the extra few bucks for the glass jar alone.
I used very little. Less than what I would spread butter on my toast. The tub I have is 3oz, there is still about 2/3 left. And I've used it on about 8 to 10 jackets. I also use mink oil to break in my CXL if that matters. So less is more.
Also I used to just rub this stuff on the big surface areas like sleeves and panels. I've found that is uneccesary as the squeak mostly comes from the seams. That's why I had to polish off the matt mink oil layer on the sleeves and body like I do with boots. Most of my Badalssi jacket has cuffs, there are at least 20" of linear seams on each cuff, that and the arm holes is where most of the sounds comes from.
It won't be dead silent. But immediately you can notice a 70% drop in squeak.
And with a light brush its shiny again.
I used mink oil that was available at my local cobbler. Saphier makes real nice ones in glass jars but my guy doesn't stock them. Get that if you can, French polish are worth the extra few bucks for the glass jar alone.
I used very little. Less than what I would spread butter on my toast. The tub I have is 3oz, there is still about 2/3 left. And I've used it on about 8 to 10 jackets. I also use mink oil to break in my CXL if that matters. So less is more.
Also I used to just rub this stuff on the big surface areas like sleeves and panels. I've found that is uneccesary as the squeak mostly comes from the seams. That's why I had to polish off the matt mink oil layer on the sleeves and body like I do with boots. Most of my Badalssi jacket has cuffs, there are at least 20" of linear seams on each cuff, that and the arm holes is where most of the sounds comes from.
It won't be dead silent. But immediately you can notice a 70% drop in squeak.
And with a light brush its shiny again.