Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

What is your favorite hat crease?

Messages
18,171
Use a piece of 1/4" or 5/16" cloth clothesline rope (not the nylon stuff). The smaller the diameter of the rope will produce a tighter gap. You might want to look at 3/16". I don't do tele's but I use 1/4" for tight crease lines. You only need about 6-8" lengths, you won't need a full circumference. Just work it around to complete the circumference pinching tight primarily from the inside of the crown. Just keep going around working to get everything round & smooth. If you pinch from the outside you will get some puckering. When satisfied just remove the rope & leave to try.

Wet the crown with hot distilled water until you get that putty like texture. When I get close to what I want I usually work my hats sitting on a glass carousal plate from an old microwave. You can turn it around without disturbing what you have. Leave to dry.

IMG_3438.jpg


IMG_3439.jpg
 

Joao Encarnado

I'll Lock Up
Messages
7,776
Location
Portugal
I wish I had your luck (and skill) but I'm cursed (to put it lightly) and these things never work easily for me. I'm all made backwards man, what comes easy to others is near impossible to me...and what's wacky hard for others I seem to do easily....most times, lol.
Luck and skill? What luck and skill? I'm terrible at those. I only though of a way to do it easily.
Must find the Stagecoach I did the process I tried to describe.
 

Dm101

A-List Customer
Messages
496
Location
Maryland
Use a piece of 1/4" or 5/16" cloth clothesline rope (not the nylon stuff). The smaller the diameter of the rope will produce a tighter gap. You might want to look at 3/16". I don't do tele's but I use 1/4" for tight crease lines. You only need about 6-8" lengths, you won't need a full circumference. Just work it around to complete the circumference pinching tight primarily from the inside of the crown. Just keep going around working to get everything round & smooth. If you pinch from the outside you will get some puckering. When satisfied just remove the rope & leave to try.

Wet the crown with hot distilled water until you get that putty like texture. When I get close to what I want I usually work my hats sitting on a glass carousal plate from an old microwave. You can turn it around without disturbing what you have. Leave to dry.

View attachment 157502

View attachment 157503

OMG that is absolutely GENIUS!!!
Thank you!!!!
:eek::D

I will be heading to the hardware store in the morning!!
 

Joao Encarnado

I'll Lock Up
Messages
7,776
Location
Portugal
I think it was Hurricane Jack that keeps talking about a planter hat... so after I got a 3rd Resistol Stagecoach Turkey Creek in black, I decided to give it a go.
planter01.jpg

planter02.jpg


After I open crown the hat and wet it I did this
planter04.jpg


That ended like this (it's up to you how low you want to go) and let it dry.
planter03.jpg


After that I wet the "bowl" I made, put it on my head the right way up and with my fingers work it out.
planter05.jpg


End result on head
planter06.jpg
 
Messages
18,171
I think it was Hurricane Jack that keeps talking about a planter hat... so after I got a 3rd Resistol Stagecoach Turkey Creek in black, I decided to give it a go.
planter01.jpg

planter02.jpg


After I open crown the hat and wet it I did this
planter04.jpg


That ended like this (it's up to you how low you want to go) and let it dry.
planter03.jpg


After that I wet the "bowl" I made, put it on my head the right way up and with my fingers work it out.
planter05.jpg


End result on head
planter06.jpg
Nice job Joao. I was wanting to duplicate this planters hat & thought the Akubra Territory would be a good candidate for it. Never found a Territory so didn't get it done.

The second pic is just a model used to display the braided hatband.

IMG_3726.JPG


IMG_7195.JPG
 
Messages
18,171
Thank you. I believe I went too low for the crown but the proportions are there. Maybe a Woomera or a Sombrero can do one. More than 4" brim is needed for me.
Your's probably needs a narrower ribbon, then the crown height wouldn't look as low. The Territory is a 4" brim & the crown is a 4" precreased tele. The crown does have a bit of slope front & back to match the lines of the packer draw on the brim. But I always thought the Territory was the best candidate. I didn't want to buy a new one & you don't see many preowned come up for sale, especially in my size. So I eventually quit looking.
 

Dm101

A-List Customer
Messages
496
Location
Maryland
I think it was Hurricane Jack that keeps talking about a planter hat... so after I got a 3rd Resistol Stagecoach Turkey Creek in black, I decided to give it a go.
planter01.jpg

planter02.jpg


After I open crown the hat and wet it I did this
planter04.jpg


That ended like this (it's up to you how low you want to go) and let it dry.
planter03.jpg


After that I wet the "bowl" I made, put it on my head the right way up and with my fingers work it out.
planter05.jpg


End result on head
planter06.jpg

Oh wow...Awesome technique!!
Awesome hat!!
Awesome beard!!!

Thank you, Giving that a shot later!
 

Joao Encarnado

I'll Lock Up
Messages
7,776
Location
Portugal
Your's probably needs a narrower ribbon, then the crown height wouldn't look as low. The Territory is a 4" brim & the crown is a 4" precreased tele. The crown does have a bit of slope front & back to match the lines of the packer draw on the brim. But I always thought the Territory was the best candidate. I didn't want to buy a new one & you don't see many preowned come up for sale, especially in my size. So I eventually quit looking.
For me, the planter hat looks to have a 5" brim and a 3" crown.
 

AbbaDatDeHat

I'll Lock Up
Messages
8,829
ACABF746-CCBC-4E6B-AA14-90F709AB3779.jpeg
453C03A3-6F72-4C99-9701-699EA4E454BE.jpeg
A17723F8-24E8-4059-A2C6-6459F42EA162.jpeg
8DCCC035-9DE7-46CF-883C-CA27DEA66679.jpeg
Greetings All:
I thought i’d post up this before and after crease from a vintage Disney Camel Hair. The felt on this hat is soft and molds to whatever you care to give it. I steamed it to open crown. It suprised me how much more rigid it was after the steam. I then put a center crease in it for awhile then dry creased a diamond. I set the detail in the finished diamond with steam. Again, suprised how firm the hold.
So...before and afters.
Be well. Bowen
 
Messages
19,001
Location
Central California
View attachment 161114 View attachment 161115 View attachment 161116 View attachment 161118 Greetings All:
I thought i’d post up this before and after crease from a vintage Disney Camel Hair. The felt on this hat is soft and molds to whatever you care to give it. I steamed it to open crown. It suprised me how much more rigid it was after the steam. I then put a center crease in it for awhile then dry creased a diamond. I set the detail in the finished diamond with steam. Again, suprised how firm the hold.
So...before and afters.
Be well. Bowen

I love this hat.
I like it a lot with the center crease and with your signature diamond. Thanks for sharing...it give me some ideas.


Sent from my iPhone using Tapatalk Pro
 

Dm101

A-List Customer
Messages
496
Location
Maryland
View attachment 161114 View attachment 161115 View attachment 161116 View attachment 161118 Greetings All:
I thought i’d post up this before and after crease from a vintage Disney Camel Hair. The felt on this hat is soft and molds to whatever you care to give it. I steamed it to open crown. It suprised me how much more rigid it was after the steam. I then put a center crease in it for awhile then dry creased a diamond. I set the detail in the finished diamond with steam. Again, suprised how firm the hold.
So...before and afters.
Be well. Bowen

The grain and color of the felt in that topper remind me of the "Starry Night" painting...beautiful!
 
Messages
18,171
Finally was able to find & win a big Akubra Territory with two hats in mind for a conversion.

IMG_1669.JPG


I've always admired this hat Tim made back under his Cane Rod Maker name. Sorry I don't recall if it was made for a Lounge member or not. I think the Territory is a good candidate. I'll see for sure when it gets here.

IMG_2341.PNG


Always wanted to replicate this planters hat that pre-dates & was worn thru the Civil War by a General (Beauregard?) now in a museum. The more I have thought about it I think the crown would be too low for me to wear.

IMG_3726.JPG
 
Messages
19,001
Location
Central California
Yesterday's Stetson Vogue with a crease that changed as the day went along. It really started as a diamond with hard edges and then morphed.

i-jMXwxHt-M.jpg


Today's Adam Pacesetter with a light teardrop crease.

i-m7NNgvP-M.jpg


Best, Eric -


Wow, Resistol has self conforming sweatbands and apparently Adam has self creasing crowns.


Sent from my iPhone using Tapatalk Pro
 
Yesterday's Stetson Vogue with a crease that changed as the day went along. It really started as a diamond with hard edges and then morphed.

i-jMXwxHt-M.jpg


Today's Adam Pacesetter with a light teardrop crease.

i-m7NNgvP-M.jpg


Best, Eric -
That Stetson Vogue is really, really, something! Beautiful.....
M
 
Ok, I have this hat that was not recieving much love, even though the felt and color are simply wonderful, AND it is a thin ribbon OR clone......and I really like my thin ribbon hats. I grab it to go out the other day and the wife says: "I really don't like that one on you".....:eek::rolleyes: Here is the offending hat!o_O
20180714_080348.jpg

Then after two days I have an epiphany....I.....yes, I .....really do not like it either!:eek::rolleyes:
And NOW I know exactly why! It was the CREASE! As a rule, I do not like what is now often refered to as a "Cattleman/Rancher" crease......even the hand done ones are just too......well.........too sterile! Just like a factory pressed crease, they are just too perfect! Not to mention they seem to make ANY hat....dare I say it.....Western:eek:.
AND that is the general reaction of most anyone really......even when worn with the brim snapped down. SO........I went to work......and found the felt was so very nice I did THIS in less than 10 minutes......AND......get this......it is a DRY CREASE!:eek::rolleyes::)
Now, BOTH my wife and I, like this hat!!:):):) As we SHOULD!:D
20190424_084739.jpg
20190424_084728.jpg
20190424_084806.jpg
20190424_094555.jpg
 

Forum statistics

Threads
109,100
Messages
3,074,105
Members
54,091
Latest member
toptvsspala
Top