Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Vanson! Vanson! Vanson!

Al 916

One Too Many
Messages
1,906
Location
GB
IH appear to be the only UK stockist.
They only have 8oz in stock @ £18 a hit. As it happens I am sending 634s in for a free maintenance stitch in time so may ask them to add a couple on the back of the return P&P.

Every little helps
 

Marc mndt

I'll Lock Up
Messages
7,304
IH appear to be the only UK stockist.
They only have 8oz in stock @ £18 a hit. As it happens I am sending 634s in for a free maintenance stitch in time so may ask them to add a couple on the back of the return P&P.

Every little helps
8oz is more than enough to recondition 5 jackets I'd say.
 

Al 916

One Too Many
Messages
1,906
Location
GB
Dang that's pricy. How much do you need, just for one jacket? I'll send you half a jar at shipping costs.
Kind of you Marc. Thanks, but I may as well bite the IH bullet and get a couple of 8oz for £36.
I want to try some on the Brooks and have a (possible HH) incoming interesting 70s Brown that might go that way too
 
Messages
17,490
Location
Chicago
Fully oiled and restored to its former self.
IMG_5244.jpeg
 

mboon85

New in Town
Messages
17
The Oxford I have spec’d with TB has some minor changes. Still waiting for confirmation but it goes like this:

*comp weight, black
*move chest pocket from left to right side
*chest pocket slanted Enfield style
*red plaid lining
*double ended zip
*brass hardware
*remove centre seam on back panel
*two inside pockets, one horizontal left side, one vertical right side

Haven’t got a delivery yet but I’m expecting this fall sometime


You got the back panel as a single panel, like an Enfield? the thing that makes me hesitant on the Oxford is I dont love the seam on the spine.
 

Mawashi

One of the Regulars
Messages
225
You got the back panel as a single panel, like an Enfield? the thing that makes me hesitant on the Oxford is I dont love the seam on the spine.

The center seam helps to reduce the back bulge as the leather has no where to go and can puff up when you straighten your back, this is especially true if you ride often and the back is molded to that rounded shape, so when you straighten up the back will pop out and look like a bad bulge.

I don't like the center seam too but some have said on many expensive jackets there is a center seam and it's likely to there to keep it looking neat.
 

abone

A-List Customer
Messages
429
Location
British Columbia
The center seam helps to reduce the back bulge as the leather has no where to go and can puff up when you straighten your back, this is especially true if you ride often and the back is molded to that rounded shape, so when you straighten up the back will pop out and look like a bad bulge.

I don't like the center seam too but some have said on many expensive jackets there is a center seam and it's likely to there to keep it looking neat.
I’ve never heard that before and it would be interesting to hear from Enfield owners that ride, if this indeed is the case. Lots of MC jackets have one piece backs, some consider it a safety feature. My Vanson Raid is a one piece back for example. I added it for two reasons, to smooth out the back from an aesthetic point of view, and to increase structural integrity for what that’s worth.
My road glide has a back rest anyway so it won’t puff out leaning against that.
Edit - should also state riding is a secondary purpose of this jacket for me. Maybe to hop on for short rides but anything long I’ve better jackets for that.
 
Last edited:
Messages
17,490
Location
Chicago
Looks great! What size is this one?
42”. I need a 42” in the B family of jackets. The 40’s and 44’s I can wear but the 42” seems to be the best fit.
40” 9d T shirt fit only, especially with the quilted liner
IMG_1911.jpeg

42” Model F. Rayon liner
IMG_5290.jpeg

So the only natural conclusion is I need to buy a 42” 9D. It took me too long to figure this out. Not sure why.
 
Last edited:

Mawashi

One of the Regulars
Messages
225
I’ve never heard that before and it would be interesting to hear from Enfield owners that ride, if this indeed is the case. Lots of MC jackets have one piece backs, some consider it a safety feature. My Vanson Raid is a one piece back for example. I added it for two reasons, to smooth out the back from an aesthetic point of view, and to increase structural integrity for what that’s worth.
My road glide has a back rest anyway so it won’t puff out leaning against that.
Edit - should also state riding is a secondary purpose of this jacket for me. Maybe to hop on for short rides but anything long I’ve better jackets for that.

Let me find the thread somewhere as quite a few members echoed that statement about the center seam but let me find those threads.

https://www.thefedoralounge.com/threads/seam-down-the-middle-in-the-back-poll.101849/

Yeah, I'd find the centre seam a lot more aesthetically pleasing of topped off with a nice yoke. It'll definitely sell out , even if only for the fact that it's two big brands that both have a following, and with a market as big as Schott's surely they must have fifty people will want one.... The design isn't bad, though for me it's longer in the body than I care for in a jacket like that. I'm indifferent to Shinki, so that doesn't have an especial pull for me. Still, it's interesting to see such a mass-market brand dabbling in this sort of limited edition and niche branding.

That would make sense. Aero mention this on their website wrt the Board Racer model - they will make it without the centre seam on request, but point out that this will affect the fit. My understanding is that the way the two panels are cut can better allow for the fit against the curve of the back than a single piece. From that perspective, it is perhaps interesting that I see the centre seam much more on high-end motorcycle jackets as opposed to high end "fashion" pieces (for want of a better way of putting it - leather jackets worn for style rather than as motorcycle wear).

looks good from the front, perhaps can use more splay below the zipper box for a longer jacket like that for sitting, as from the back I think since it has center seam it should look a lot neater toward the lower back, it should taper more

I have a custom one with the center seam. It makes the jacket fit nicer, better contouring. Without it there could be unwanted horizontal creases or rolls especially on heavier leather. But yeah J100 is classic design with the plain back. Tough call.

What leather you thinking?

View attachment 495792

I found some the center seam discussions.
 
Last edited:

abone

A-List Customer
Messages
429
Location
British Columbia
Thanks for this. I read the entire thread that began with the poll. Carrie told me the back piece isn’t cut on a curve so I’m hopeful I don’t have a problem wrt to bunching or bowing. As I said earlier, the Enfield has the one piece, and so does the Schott 689, an almost identical pattern.
I like the centre seam on my Oxford but wanted my next to have a one piece panel. I did think about spec’ing a yoke but the changes start to add up and then there is the risk of moving too far away from the original Vanson pattern.
I’ll know in a few months!
 

Mawashi

One of the Regulars
Messages
225
From my understanding and this is from a guy who only has 1 jacket lol, the seam seems to help, pun intended.

It'll allow the leather to fold inwards to the spine according to the natural contours of the back. When I stretch back to yawn, I can feel the center of the jacket folding to the back of my spine, I would think that if the back was 1 piece, this action will cause it to bulge outward as the leather has nowhere else to go.

I guess if the jacket has been seasoned and has molded to your back this wouldn't be a problem but for newish jackets, quite a few of the members here have experienced the back bulge from the photos posted.

I'm actually hoping that your 1 piece experiment works cos I am really looking to get a vanson myself and would prefer a 1 piece back too :)
 

TartuWolf

One Too Many
Messages
1,162
Location
Tartu, Estonia
Finally got a Vanson coming my way. Been dreaming about one ever since joining TFL. You folks really do a good job advertising and praising it here :)
Fingers crossed that it fits.
Owner said he has maintained it with the recommended Vanson leather balm, but the impression I got on TFL is that it's really not necessary to treat leather jacket in any way in the first 10+ years of it's life.
Any comments on this aspect? Should I put the leather balm included with the jacket in dark place for the next 10 years?
1683573944328.png

1683573950967.png
 

El Marro

My Mail is Forwarded Here
Messages
3,591
Location
California
Finally got a Vanson coming my way. Been dreaming about one ever since joining TFL. You folks really do a good job advertising and praising it here :)
Fingers crossed that it fits.
Owner said he has maintained it with the recommended Vanson leather balm, but the impression I got on TFL is that it's really not necessary to treat leather jacket in any way in the first 10+ years of it's life.
Any comments on this aspect? Should I put the leather balm included with the jacket in dark place for the next 10 years?
View attachment 515497
View attachment 515498
Nice Chopper!
Regarding the leather, ten years is probably about right until it needs another treatment. I used to treat my jackets with Pecards once a year but that was just me being a noobie. I don’t think it hurt them at all, but it certainly wasn’t necessary.
 

Aloysius

My Mail is Forwarded Here
Messages
3,943
Finally got a Vanson coming my way. Been dreaming about one ever since joining TFL. You folks really do a good job advertising and praising it here :)
Fingers crossed that it fits.
Owner said he has maintained it with the recommended Vanson leather balm, but the impression I got on TFL is that it's really not necessary to treat leather jacket in any way in the first 10+ years of it's life.
Any comments on this aspect? Should I put the leather balm included with the jacket in dark place for the next 10 years?
View attachment 515497
View attachment 515498

One of the best jackets you could have chosen, worn by legendary men like @El Marro. I have my eye on a similar model.
 
Messages
16,803
Finally got a Vanson coming my way. Been dreaming about one ever since joining TFL. You folks really do a good job advertising and praising it here :)
Fingers crossed that it fits.
Owner said he has maintained it with the recommended Vanson leather balm, but the impression I got on TFL is that it's really not necessary to treat leather jacket in any way in the first 10+ years of it's life.
Any comments on this aspect? Should I put the leather balm included with the jacket in dark place for the next 10 years?
View attachment 515497
View attachment 515498

10? Try 50. This leather doesn't get dry.
 

Forum statistics

Threads
109,096
Messages
3,074,046
Members
54,091
Latest member
toptvsspala
Top