Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Sewing Lessons & FAQ

MarieAnne

Practically Family
Messages
555
Location
Ontario
Circle skirt length

I am making a circle and the length of the circle skirt on the pattern envelope is 29.5". This feels a bit long for me and I was wondering what everyone's preferred circle skirt length was. I was thinking of going for 24-26".
 

kamikat

Call Me a Cab
Messages
2,794
Location
Maryland
The current preferred lengths of skirt are 3in above the knee, 3in below the knee and 3in above the ankle. Is your circle skirt pattern a 50's pattern? The skirts were typically ballerina length, just below mid-calf. It really depends on whether you want an authentic look or more of a vintage-inspired look. I tend like mid-calf for dresses and 3in below knee for skirts. For some reason, longer skirts look alot more frumpy on me than longer dresses.
 

o0olibelulao0o

Familiar Face
Messages
53
Location
Fredericksburg, TX
Making your own crinoline??

Ok, so I've decided what I'm going to wear to my 50's rock n' roll party... I'm going to wear a light yellow full circle skirt (that will be home made :) and sans poodle applique) and a white top (not sure which one but I have loads of those) HOWEVER, I'm on a really tight budget, so instead of buying a crinoline, I'm going to ATTEMPT to make one... (in light blue none-the-less) I have looked up LOAD of tutorials online but all they have done is scare/confuse me to death...

Anyone have a super easy tutorial/pattern? And any tips/tricks would be GREATLY appreciated. :) Thanks in advance!
 

MarieAnne

Practically Family
Messages
555
Location
Ontario
o0olibelulao0o said:
Ok, so I've decided what I'm going to wear to my 50's rock n' roll party... I'm going to wear a light yellow full circle skirt (that will be home made :) and sans poodle applique) and a white top (not sure which one but I have loads of those) HOWEVER, I'm on a really tight budget, so instead of buying a crinoline, I'm going to ATTEMPT to make one... (in light blue none-the-less) I have looked up LOAD of tutorials online but all they have done is scare/confuse me to death...

Anyone have a super easy tutorial/pattern? And any tips/tricks would be GREATLY appreciated. :) Thanks in advance!

This has to be the best petticoat tutorial I have ever found. http://sugardale.blogspot.com/2008/08/how-to-make-petticoat.html
 
HELP!!!!

I am working on Advance 7837, vintage blouse pattern. I measure a 42" bust (maybe 41 1/2) The pattern is size 42" bust. It is coming out too wide and too big in the bust. What am I doing wrong? (This is my cheap test fabric since this is my first time using a vintage ( not repro)pattern to sew for myself.)
Here are pics on me and on my dress form. HELP!!!!

blusemockup1.jpg

blousemockup2.jpg

blousemockup3.jpg

blousemockup4.jpg

blousemockup5.jpg

You can see how big it is best in the photo's showing the arm hole.
 

MissAmelina

A-List Customer
Messages
413
Location
Boise, ID
From where I sit, it looks really good, so be kind to yourself! :)

I am working on a blouse very similar to this as we speak....bear in mind that when you attach the sleeves, you will tighten it at least 1/2 inch on each side in the seam allowances.
Don't know if that helps, but it might make a little difference. You can always take in the side seams a bit too...or extend the darts up in the front too, position the buttons to tighten it up a smidge.....Lots of options...just play around with it using basting stitches.

Someone else will probably have more specific advice....I am still learning alot about these kinds of adjustments, but I would baste the sleeves on and figure out where the buttons go first.
 

Lady Day

I'll Lock Up
Bartender
Messages
9,087
Location
Crummy town, USA
To me, it seems like the sleeve holes were larger than your liking.

Id suggest altering the pattern for the next go 'round, but, to save this one, you can add pieces beneath the under arm.

blousemockup5.jpg


Just lay out the pattern piece and cut a wedge of fabric to fit.
Taking in the excess from the sleeve might be more difficult, as you will now have a few inches more to work with. Simply taking in more at the seam isnt going to do it, Id cut down the curve of the sleeve (slightly, not by too much), especially where it shapes into the new piece you've added.

Know it sounds like gibberish, but maybe another lady can explain it in cleaner terms.

Good luck!

LD
 
I appreciate your input Lady Day (master seamstress ;) )
The armhole is actually fine. It even says on the pattern that is is lower. I am am having more of an issue with the excess fabric shown here.
blusemockup1spot.jpg

I am really lost inside this thing. A friend of mine that sews said my bust measurement should be taken under my bust. But my sewing books say at the fullest part. That is what I was going by, but yet this pattern at 42 is way too big in the bust and width in general. Did I measure wrong? Or is this pattern just really big?
 

Lady Day

I'll Lock Up
Bartender
Messages
9,087
Location
Crummy town, USA
OOpsie me :eek: I thought you were having issue with the arm holes.

blusemockup1.jpg


Make the darts on the bust and at the hem longer and deeper. That should help your bust fitting issue.

LD
 

kamikat

Call Me a Cab
Messages
2,794
Location
Maryland
Cherry Red, it looks like you're dealing with 2 issues here. The first is wearing ease. In 50's patterns, I've noticed that there is generally about 3-4in of wearing ease in the bust and zero-1in of wearing ease in the waist. The second is cup size or the difference between bust and waist. 50's patterns are drafted with a larger difference between bust and waist than 40's or modern patterns. For someone like me, who has to do a full bust adjustment in modern or 40's patterns, it means I don't have to do a FBA in 50's patterns. If you are smaller in the bust, probably closer to a C or less, you either need to do a small bust adjustment or in the future, look for patterns to fit a size 40. I have a 45 bust and size 42 patterns usually fit me perfectly right out of the envelope.
 

kerry

One of the Regulars
Messages
228
Location
enfield, UK
Im just about to order a couple of the Vintage vogue patterns. I am going to order the 18-20-22 size as i am a 18-20 according to their measurments. :eek: I am losing weight though. Will it be easy to make adjustments to the patterns in the future or will I have to buy another set? I cant ever see myself being below a sixteen as I need a bit of fat to iron out the wrinkles;)
 

Pinky Boo

New in Town
Messages
4
Location
Nottingham, UK
I am really lost inside this thing. A friend of mine that sews said my bust measurement should be taken under my bust. But my sewing books say at the fullest part. That is what I was going by, but yet this pattern at 42 is way too big in the bust and width in general. Did I measure wrong? Or is this pattern just really big?
[/QUOTE]

The bust measurement should be taken as the fullest part of the bust when dressmaking (maybe your friend is confusing this with measuring for a bra?), and if you ae unhappy with the excess fabric then I would simply dart it. Just remember though, that the bras of the 50's were padded "bullet" types that projected you a lot further forward than modern bras. I would suggest when fitting your garment you wear a bra that you are going to wear with it, as different styles of bra put your bustline in a slightly different place. Personally I thik it looks fab. Also, have you done my usual trick of not using all your seam allowance up? Over a whole garment it can really throw the sizing out!

If anyone is interested, my friend and I have a blog about making vintage lingerie - each month we challenge ourselves (and anyone who cares to join us) to make an item of vintage inspired lingerie - pop over and see us at http://frillybits.co.uk

Be sure to post pictures when you're done!
 

kamikat

Call Me a Cab
Messages
2,794
Location
Maryland
Pinky Boo said:
The bust measurement should be taken as the fullest part of the bust when dressmaking (maybe your friend is confusing this with measuring for a bra?), !
This is partially incorrect. Modern patterns are drafted for a B/C cup. If you wear a B or C cup, you measure at the fullest part of the bust. If you are larger than a C cup, then you need to measure at the high bust, which is right under the armpits. This ensures that your pattern will fit your shoulders and neckline, which is the hardest area to fit. Then you would do a full bust adjustment, which adds fabric only to the bust area, where you need it.
 
kamikat said:
Cherry Red, it looks like you're dealing with 2 issues here. The first is wearing ease. In 50's patterns, I've noticed that there is generally about 3-4in of wearing ease in the bust and zero-1in of wearing ease in the waist. The second is cup size or the difference between bust and waist. 50's patterns are drafted with a larger difference between bust and waist than 40's or modern patterns. For someone like me, who has to do a full bust adjustment in modern or 40's patterns, it means I don't have to do a FBA in 50's patterns. If you are smaller in the bust, probably closer to a C or less, you either need to do a small bust adjustment or in the future, look for patterns to fit a size 40. I have a 45 bust and size 42 patterns usually fit me perfectly right out of the envelope.

Thank you for this info on the differences in decades. The waist seems to be ok. Most of my patterns are 40's so I am guessing by what you are saying that they will fit me better, having a closer ratio to bust, waist. I am about a C I think. I have been wearing D, but sometimes they gap.
I ordered some pattern paper so I can work with it more.
Thank you all for all your tips! :D
 

MissAmelina

A-List Customer
Messages
413
Location
Boise, ID
I am making a knee length six gored lightweight denim skirt from a 1945 pattern....I know they probably did not make their skirts out of denim back then, :) but I need something versatile and hardy to wear on holiday in a few weeks.

What kind of seam should I use give it more vintage appeal? I usually use flat-felled on denim, but I don't know if that would look right. It might throw off the hang of the skirt.

Any suggestions? I have a few manuals, so I can always look up the name of a seam if I am not familiar.

I am not a huge stickler when it comes to these things...I just want it to look polished and thought you loverly ladies might have some advice! :)

EDIT: I went ahead and did regular seams, and it looks nice and polished.
 

retrogirl1941

One Too Many
Messages
1,520
Location
June Cleavers School for Girls
I am making this pattern
1934pattern.jpg

and I noticed when I tried the skirt on that it was very loose. Looking at the picture on the envelope it looks as if it should be very fitted. Or is it that skirts from this period are suppossed to fall straight down from the hips?

Samantha
 

Lady Day

I'll Lock Up
Bartender
Messages
9,087
Location
Crummy town, USA
Retrogirl,

Is this an original or a redraft? The redraft might have added a lot of ease, hence the bagginess, because 30s skirts are super fitted.

Also, and this is probably too silly to ask, but did you sew the pleats on the front down?

LOVE that cape :rolleyes:

LD
 

kamikat

Call Me a Cab
Messages
2,794
Location
Maryland
retrogirl1941 said:
and I noticed when I tried the skirt on that it was very loose. Looking at the picture on the envelope it looks as if it should be very fitted. Or is it that skirts from this period are suppossed to fall straight down from the hips?

Samantha
I've only made a couple dresses and skirts from the 30's, but I've found them to be fitted at the waist to the hip, then straight down.
 

Forum statistics

Threads
109,100
Messages
3,074,105
Members
54,091
Latest member
toptvsspala
Top