Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Peacoat

*
Bartender
Messages
6,601
Location
South of Nashville
The coat is too big for you. You need to go at least one size down to a 34. A size 32 might fit you better, but they are almost impossible to find. Hang on to this one, and when you fill out, it will fit you. Don't have it tailored. Leave it the way it is.

What is your actual chest measurement in inches? Not the jacket size you normally wear, but your chest measurement as explained in the guide. This is the first step in determining what size peacoat you need.
 

jet

New in Town
Messages
4
The coat is too big for you. You need to go at least one size down to a 34. A size 32 might fit you better, but they are almost impossible to find. Hang on to this one, and when you fill out, it will fit you. Don't have it tailored. Leave it the way it is.

What is your actual chest measurement in inches? Not the jacket size you normally wear, but your chest measurement as explained in the guide. This is the first step in determining what size peacoat you need.
Chest measurement is 36” maybe 36.5” which is why I figured it would be the right size. Maybe I don’t have standard body proportions? I’m 5’7 and my waist is a 26 so maybe my upper body is a bit larger relative to the rest of me.
 

WolfofStateSt

A-List Customer
Messages
393
The coat is too big for you. You need to go at least one size down to a 34. A size 32 might fit you better, but they are almost impossible to find. Hang on to this one, and when you fill out, it will fit you. Don't have it tailored. Leave it the way it is.

What is your actual chest measurement in inches? Not the jacket size you normally wear, but your chest measurement as explained in the guide. This is the first step in determining what size peacoat you need.
I agree with Peacoat. That coat is too big for you.
 

Bolex

New in Town
Messages
8
Thanks Jagg. I got in in the UK from a seller on flea bay, we’d been chatting for a while about it before I decided to go for it. From the pics it’s in remarkable condition but I am a bit worried about the size, it’s a 42, as Mr. Peacoat says, as the P2P measurements are 22” but the shoulders are 20” across according to the images. The previous owner must have been a silverback or something! The only way to find out is to get my hands on it and try it out. The seller has been superb and agreed to accept a return if it is too big. Annoyingly, I’m in London all week and the coat has been delivered already to my house in Norfolk. I won’t see it until Friday…
Im in yarmouth norfolk and looking for a ex navy peacoat im a size 38 chest
 

Bfd70

I'll Lock Up
Messages
4,591
Location
Traverse city
IMG_7933.jpeg
IMG_7928.jpeg
IMG_7929.jpeg
IMG_7934.jpeg


IMG_7930.jpeg
IMG_7931.jpeg

5’10 165# 33x15.5 dress shirt 39” chest
This is with a light layer under.
 

Kfz

One of the Regulars
Messages
103
Hi : Anyone have experience of repairing peacoat lining that is splitting apart? Thanks
 

Attachments

  • IMG_6882.jpeg
    IMG_6882.jpeg
    5.4 MB · Views: 19
  • IMG_6881.jpeg
    IMG_6881.jpeg
    5 MB · Views: 21
Last edited:

Bolex

New in Town
Messages
8
So i just bout a ww2 peacoat advertised as a size 19 inch pit to pit in beautiful condition but its too tight for me i can do the buttons up i measured pit to put as 20 inches so better fit fir a 36 inch chest i would say i am a 38 inch correction got someone else to measure me and im a 39 inch chest! iv been going the gym chest have been hitting the weights the last year which showed in my upper body bulking i can see what people mean though about the quality of these it does not look like its 80 years old apart from sone small holes in the lining near the collar beautiful cordrey pockets i am gutted so going forward im unsure if i should be looking for a 40 inch chest ?
 

Attachments

  • IMG_4465.jpeg
    2.9 MB · Views: 21
  • IMG_4467.jpeg
    IMG_4467.jpeg
    5.2 MB · Views: 14
Last edited:

Peacoat

*
Bartender
Messages
6,601
Location
South of Nashville
So i just bout a ww2 peacoat advertised as a size 19 inch pit to pit in beautiful condition but its too tight for me i can do the buttons up i measured pit to put as 20 inches so better fit fir a 36 inch chest i would say i am a 38 inch correction got someone else to measure me and im a 39 inch chest! iv been going the gym chest have been hitting the weights the last year which showed in my upper body bulking i can see what people mean though about the quality of these it does not look like its 80 years old apart from sone small holes in the lining near the collar beautiful cordrey pockets i am gutted so going forward im unsure if i should be looking for a 40 inch chest ?
P2P of 19" is the standard measurement for a size 34 peacoat. A p2p of 20" is the standard measurement for a size 36 peacoat.

With a chest of 39", you should be able to wear a size 40 peacoat (p2p of 21.25") with room to layer a sweater. A size 38 peacoat (p2p of 20.25) should give you a more fitted coat. I would start with a size 40 and see how that works for you.

A hint on terminology: When discussing the measurements of peacoats, we speak in terms of the p2p measurement only. We don't use the measurement around the coat.

We never refer to our chest in terms of p2p. We use the actual measurement around the chest.
 

spoonbelly1950

Familiar Face
Messages
82
And I have seen this statement quoted by those who advocate Melton as the superior fabric. My question then, as it is today, exactly what type of fabric were they referring to as "Kersey" and what period of time was this? Don't believe everything you read on the internet. There is a lot of misinformation out there. And a lot of it is subject to misinterpretation.

Those of us who have actually handled the two fabrics should be more credible than an anonymous source on the internet.
Let us not forget that Kersey has a superior appearance over Melton. These US Navy Peacoats certainly look quite sharp!!! Melton looks good but it ain't in the same class as Kersey.
 

spoonbelly1950

Familiar Face
Messages
82
is actually a this is the peacoat thread, I assume you are asking about Navy peacoats.

Mostly the coats were true to the size stated on the tag. Occasionally there were anomalies, which is why I suggest getting accurate measurements from the seller. It does not vary by manufacturer.

The actual measurement of one's chest is the first step. Not the jacket size one usually wears, but the actual measurement of the chest.

For example if one's chest measures 38", then a size 38 peacoat should give a relaxed fit sufficient for layering a sweater underneath. A size 36 peacoat should give a fitted look without room for comfortable layering.

For details, see the Guides Section.
I have a 1969 Kersey coat which has a tag that states it is " 44L " (Long). It is actually a 46L. It fits the same as my other 8 size 46 peacoats.
 

JackieL

New in Town
Messages
1
Hello everyone,
After searching thrift stores for a real USN pea coat for 15 years, I believe I have finally found one. At first, I thought it was a 1970s Kersey but now I’m not so sure. It is a very dark blue but at times, it looks black. Haven’t been able to take it outside to compare it to a black pair of shoes because it’s been raining for days. Inside, it looks black at times and other times looks dark blue. There are no tags-only a remnant of the edges of the front tag. There is a partial handwritten number on the lower right of that tag area. It has no insulation. Pockets are an off white, smooth cotton.

The buttons are pewter. It has only one button remaining on the second row. I took it off and sewed it to the right side button line to replace one missing button. I moved all the buttons over because it felt tight. I could get it buttoned up but it was very tight. However, I moved them too far. The asymmetry will be off when I find buttons to restore the second row. So I need to redo that.
The inside left front has a black plastic button which fastens the inside right flap. The flap that fits up against your chest.

By reading on this forum, I have been hoping to find a Kersey wool but would be very happy to find a melton coat.
I can’t post pictures yet because this is my first post. Pit to pit is a little under 20”.

I have purchase civilian pea coats in the last 10 years- a 90% wool American Eagle and an 80% wool Michael Kors. it looks darker than those. The wool on the Navy pea cot feels thicker than the other two coats. It also feels a little coarser.

I hope it is a 1970s US Navy kersey but could be a 1980s melton. I am not knowledgeable enough to know the difference since I have never for certain seen a kersey wool coat in person. The wool is in very good condition with no holes. Lining had some holes which I sewed up.

I will post pics as soon as I can. Is the interior plastic button a normal thing with the pewter outside buttons? Fingers crossed it is a real Navy pea coat. Got it for $4.50.
 

Peacoat

*
Bartender
Messages
6,601
Location
South of Nashville
Welcome to the Lounge.

Yes, the black inside button is normal.

Your description of the color as being dark blue, but sometimes looking black is normal for a pre 1980 Kersey. When you can get it outside and compare with the black shorts, you will know for sure.

You actually can stand by a south facing window and make the comparison without going outside.

The description of the wool as being rough sounds more like Melton. The Kersey shell is smooth, almost like a velvet finish.

But whichever it is, it may be too small for you from your description of the fit.

Keep us updated. PC
 

Forum statistics

Threads
110,419
Messages
3,099,652
Members
54,931
Latest member
Saze305
Top