robrinay
One Too Many
- Messages
- 1,490
- Location
- Sheffield UK
Please bear in mind that some early pens were constructed from plastic made from milk protein (e.g certain Conway Stewart models) and will soften and melt if exposed to water for too long. I left a 'Dinkie' fountain pen outside overnight and rain destroyed it. If in doubt have an old expensive pen serviced by a competent person who will take it apart and gently remove dried ink from the feed etc. - you will find such on pen collecting websites and they charge less than the value of a vintage pen and will also replace fossilised ink sacs retune the nib etc. - or better still sign up for a pen repair course if you can find one. Rob
Ps I would be careful with the ammonia solution suggestion as alkalis can damage plastics and other components. I would recommend a mild solution of 'tee pol' or similar gentle detergent solution with cool water flushing. If that doesn't clear the blockage then send it to someone competent to disassemble and clean it.
Ps I would be careful with the ammonia solution suggestion as alkalis can damage plastics and other components. I would recommend a mild solution of 'tee pol' or similar gentle detergent solution with cool water flushing. If that doesn't clear the blockage then send it to someone competent to disassemble and clean it.
Last edited: