Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

AbbaDatDeHat

I'll Lock Up
Messages
8,856
^^^^well i can see the wheels starting to come off around here. Lol
Some reason i have images of Jack Nicolson. In about a month should be very interesting.
Hopefully cabin fever is the only fever to abide.
B
 

rclark

Call Me a Cab
Messages
2,275
Location
Central Texas
The long-elusive green Open Road Has finally arrived!
6205BA4D-C3FE-49AD-862E-94BDB4A6327F.jpeg
3D020C8F-5812-4237-AC7D-70B7B9E32E5C.jpeg
38D036D1-DE45-4676-9D38-E59C963F1516.jpeg
 

Hagwood

Call Me a Cab
Messages
2,017
Location
Fort Worth, TX
Stetson Open Road in Silverbelly

View attachment 221731 View attachment 221732 View attachment 221734

4 1/2 crown in cattleman’s crease

1/4 thin ribbon light tan

2 3/4 brim with 1/8 matching bound edge.

1 3/4 brown leather sweat

This one arrived a couple weeks back. This is the buck and a quarter Stetson. Not $125.. one dollar and twenty five cents was the end of auction price. It has definitely seen some wear in its life as evidenced by the sweat staining around the ribbon and wear on the sweatband. But other than that it is in very good shape

Most of the gold embossment other than than the 6x logo has worn off the sweat band. But Model number SFOPRD and other Open Road indications like bound edge leave me assuming this is a fairly modern Open Road model.

Judging by info from the seller whose father was the original owner and some details of the hat itself like the UPC on the label. I’m gonna guess this one to be early 90’s or late 80’s. The seller thought it was much older still... but that’s my guess. Any thoughts here?

But my question really is brim up or down on this one?

View attachment 221735 View attachment 221733 View attachment 221738 View attachment 221739 View attachment 221741 View attachment 221736 View attachment 221740

Nice to see you in a wide brim Joe. Looks great on you. I vote brim down or flat.
 

Hagwood

Call Me a Cab
Messages
2,017
Location
Fort Worth, TX
Our esteemed member Randy @Rmccamey found this Churchill hat, which wasn't in his size and he thought of me (bless him). A Churchill hat was lacking in my collection, so we were set up for an exchange.
Here's the Churchill beaver 50. Silverbelly I guess, which seems to vary between light grey and beige with some green (yikes!) tones in there, depending on the light. Quite stiff but easily moldable. I don't own an Open Road, but this is what I would imagine they'd be.
The hand of the felt is what really makes this hat; it's exceptionally smooth and lovely to the touch. Not a thick felt, but certainly not a lightweight hat at 131 grams. The brim binding is well done and very thin (the way I like it) and the sweatband is sturdy but supple. The liner is a glorious wine red. I'm guessing 1950's, but that's just a stab in the dark really. Brim at 7cm and crown 10,5cm at the center dent.
Thanks, Randy!
churchill_01-jpg.221814
churchill_02-jpg.221815
churchill_03-jpg.221816
churchill_04-jpg.221817
churchill_05-jpg.221818
churchill_06-jpg.221819
churchill_07-jpg.221820
churchill_08-jpg.221821
churchill_09-jpg.221822
churchill_11-jpg.221823

Man, beautiful color on that one, very clean ! Great work @Rmccamey
 

Hagwood

Call Me a Cab
Messages
2,017
Location
Fort Worth, TX
I never really thought the big brim Westerns looked good on me, but I snagged this black Stetson Finalist on Goodwill for $10, thinking I might try to make it into a Wyatt Earp style. It was so filthy with dried mud all over it that I had to give it a full soap and water bath. Took the liner out and washed it separately. Looked like it had seen life on a ranch ! Still some patina on it, but just gives it character as a working hat.

A nice hatband as a bonus too, I was looking for a similar one for my Revenger. After cleaning and shaping, the Wife likes it on me, so I may keep it as is.

Not sure what all these X’s are about on this newer hat, can’t find much info on the Finalist.

7A523B04-4849-4249-A9AB-474EA023A207.jpeg

04297A97-A208-4DED-95D2-74DD886ED81D.jpeg

6F2BC0C0-A851-40E1-871E-D10D05EBC06C.jpeg

2C6460EF-2FE8-44DB-A54C-587CA0663640.jpeg

312E4FE7-CEA9-4A36-99E1-5BBC58AD12C6.jpeg
 
Last edited:
Messages
11,730
I never really thought the big brim Westerns looked good on me, but I snagged this black Stetson Finalist on Goodwill for $10, thinking I might try to make it into a Wyatt Earp style. It was so so filthy with dried mud all over it that I had to give it a full soap and water bath. Took the liner out and washed it separately. Looked like it had seen life on a ranch ! Still some patina on it, but just gives it character as a working hat.

A nice hatband as a bonus too, I was looking for a similar one for my Revenger. After cleaning and shaping, the Wife likes it on me, so I may keep it as is.

Not sure what all these X’s are about on this newer hat, can’t find much info on the Finalist.

View attachment 222051

View attachment 222052

View attachment 222049

View attachment 222053

View attachment 222050
Looks good on you Tim... and you sure can’t go wrong for ten bucks! That sure is a lot of X’s... and they all live in Texas
 

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
Well, my Whippet arrived. The felt is in fine vintage condition as is the binding, ribbon, and liner. The sweatband feels reasonably supple and tolerated me turning it inside out without issue. The Reed is broken and along with the expected verdigris the wire is protruding. The open crown is approximately 5 3/8 inches and the brim is a modest 2 3/8 inches wide. For some reason the tags have been penciled over. The factory printing is 7 1/8, and that’s also what it measures on my milliner’s tool. I suspect that this hat will end up in Japan as my last two Whippets have.

View attachment 221788 View attachment 221789 View attachment 221791 View attachment 221792 View attachment 221793 View attachment 221794 View attachment 221795 View attachment 221796 View attachment 221797 View attachment 221798
Someone should invent a hat-o-matic instant hat size machine,. Put it in, push the buttons and out pops a new size!
 
Messages
11,730
Messages
19,001
Location
Central California
Bill Hughes decided this mid-gray Knox Superfine could reside a little further West for a while. Mike at Northwest Hats changed the black ribbon to a silver for a tone-on-tone appearance. The results are excellent!

View attachment 222099 View attachment 222100 View attachment 222101 View attachment 222102 View attachment 222103 View attachment 222104 View attachment 222105 View attachment 222106 View attachment 222108


Wow, that ribbon change made a huge difference, Randy. It looked great to begin with, but the silver ribbon makes it pop. Very cool!
 

Hagwood

Call Me a Cab
Messages
2,017
Location
Fort Worth, TX
Bill Hughes decided this mid-gray Knox Superfine could reside a little further West for a while. Mike at Northwest Hats changed the black ribbon to a silver for a tone-on-tone appearance. The results are excellent!

View attachment 222099 View attachment 222100 View attachment 222101 View attachment 222102 View attachment 222103 View attachment 222104 View attachment 222105 View attachment 222106 View attachment 222108

Very nice, that ribbon color definitely works ! Nice of Bill.
 

Bill Hughes

My Mail is Forwarded Here
Messages
3,165
Location
North Texas

Hagwood

Call Me a Cab
Messages
2,017
Location
Fort Worth, TX
I think I scored pretty good on this one. A wider brim 1950's Cavanagh in just excellent condition in a beautiful Pecan color. I can't believe nobody bid on it, so I got it for $50. Already had a pretty nice diamond bash, so all I did was just even it out a little and it's good to go. Super soft thick felt and perfect sweat and liner. I think it will be a favorite.

2-5/8" brim
4-1/2" crown at the center pinch
5-5/8 open crown

9E95337B-13E2-4C97-9BB1-594D2ADFEC22.jpeg

5E1897A9-EF80-4443-BA3B-19A19816EABE.jpeg

6D9A8106-25B3-42D7-B63F-D579EB8B363A.jpeg

F0CEA92D-35C1-4555-8041-2FC3D1ABAB7A.jpeg

0EAC4AEF-A1D7-406D-93C3-3C7FFE888990.jpeg

5EA256F1-E57A-453E-A863-FF5A3DD39B7B.jpeg

139C405A-F172-4247-9306-86632027D96F.jpeg
1AB48ABF-9228-4724-8EDE-4F303117FF43.jpeg

45B244A5-AEEA-495F-B221-A4506A1C3AFB.jpeg

5963B6EB-1947-4F6D-9E98-3FD0AA0C438B.jpeg
 
Last edited:
Messages
18,476
Location
Nederland
Bill Hughes decided this mid-gray Knox Superfine could reside a little further West for a while. Mike at Northwest Hats changed the black ribbon to a silver for a tone-on-tone appearance. The results are excellent!

View attachment 222099 View attachment 222100 View attachment 222101 View attachment 222102 View attachment 222103 View attachment 222104 View attachment 222105 View attachment 222106 View attachment 222108
That is beautiful bow work, Randy. I personally prefer Mike Miller's more classic looking work to Art Fawcett's more personal style, as nice as it is. Gives the hat a totally different vibe. Nice!
 

Forum statistics

Threads
109,325
Messages
3,078,934
Members
54,243
Latest member
seeldoger47
Top