Post New Hats Here!

[Redfokker]

Here's the Pilgrim.

The crown on this one is 5 1/4" open, brim is 2 5/8". 1" band, 1/4" binding. 130g, fake wind trolley, onionskin liner tip protector. My age guess is the same as the Brent, mid 50's.
Here's the two side by side, Brent on the left.

Too bad there wasn't a Marathon there too...this guy liked Sears and Montgomery Ward, why not J.C. Penney's?

Sent from thin air using electricity and other wizardry.

They sure look like they came from the same guy, he had a thing for nice grey hats. You don't need two that look the same, send one to me, I don't care which one. More balance in your collection you know!!

 

[moehawk]

Damn Moe! I hate you in such a envious way! I love that Brent, interesting brand and great proportions. Great find!

Thanks Red!
I had wondered about the quality of the hats sold by Montgomery Ward and Sears. Not sure who made 'em, but the felt is nice and workmanship is good. Seems like they may be from the same maker except for the factory tags...

 

[moehawk]

They sure look like they came from the same guy, he had a thing for nice grey hats. You don't need two that look the same, send one to me, I don't care which one. More balance in your collection you know!!

Well, I'm going to change one to a wide ribbon. Found a couple yards of 1 5/8" black vintage grosgrain that should look great with the contrast of the thin binding. Might try to copy the bow work on my 20's Marathon, or try a shark gill.
Nice try though!

 

[Frunobulax]

Thanks Red!
I had wondered about the quality of the hats sold by Montgomery Ward and Sears. Not sure who made 'em, but the felt is nice and workmanship is good. Seems like they may be from the same maker except for the factory tags...

Not 100%, but I think those would be Lee hats. The Perfesser would know more.


Sent directly from my mind to yours.

 

[rclark]

Not 100%, but I think those would be Lee hats. The Perfesser would know more.


Sent directly from my mind to yours.

Pretty certain that is correct but I'm no professor!

 

[moehawk]

Not 100%, but I think those would be Lee hats. The Perfesser would know more.


Sent directly from my mind to yours.

I was wondering if Lee did more private labels and department store house brands other than the Marathon. Hope the Prof chimes in on this one!

 

[rclark]

I was wondering if Lee did more private labels and department store house brands other than the Marathon. Hope the Prof chimes in on this one!

I believe they did. Buyer-Rolnick played that game as well.

 

[BobHufford]

Seems like they may be from the same maker except for the factory tags...

The arrow in the logo on the Sears looks similar to one used on this Resistol made for Montgomery Ward. Could just be a coincidence ...

 

[rclark]

The arrow in the logo on the Sears looks similar to one used on this Resistol made for Montgomery Ward. Could just be a coincidence ...

Good catch! Lee and Byer-Rolnick were two of the largest store brand manufacturers back in the day.

 

[moehawk]

The arrow in the logo on the Sears looks similar to one used on this Resistol made for Montgomery Ward. Could just be a coincidence ...

You may be on to something there...

 

[moehawk]

I believe they did. Buyer-Rolnick played that game as well.

Well, if they are Lee or B-R, that would explain the nice quality.

 

[Bob Roberts]

Here's the Pilgrim.

The crown on this one is 5 1/4" open, brim is 2 5/8". 1" band, 1/4" binding. 130g, fake wind trolley, onionskin liner tip protector. My age guess is the same as the Brent, mid 50's.
Here's the two side by side, Brent on the left.

Too bad there wasn't a Marathon there too...this guy liked Sears and Montgomery Ward, why not J.C. Penney's?

Sent from thin air using electricity and other wizardry.

And I gotta tell you those are some beautiful light shades of Grey. No 50 jokes plz.

 

[moehawk]

And I gotta tell you those are some beautiful light shades of Grey. No 50 jokes plz.

I agree. Nice colors.
I'll just post pics wearing them with my Kookie jacket I posted about the other day with a grin and raised eyebrow.

 

[Miklo]

Hey all!
I went back to the thrift store where I bought that G1 to see if the detachable collar had been donated with it. I spoke to the manager, who told me she'd ask the folks who were sorting when it came in. She also invited me to look around the sorting area in case it was sitting in a "what the heck is this" pile. Didn't see it, but I did spot a pair of hats, nearly identical, and had to check them out. A Pilgrim and a Brent, both in near minty condition. Asked for dibs when they were priced. She said make an offer. I offered 40 bucks for the pair, expecting a counter offer. She just said Deal!

Here's the Brent.

The crown is 5" open, brim 2 5/8". Band is 1" , bound in 1/4" ribbon. 125g total weight.
I know I'm not the best at dating hats, but I'll venture a guess of mid 50's. Any input always welcome!
Now to get pics of the Pilgrim.


Sent from thin air using electricity and other wizardry.

Nice hats and what a deal.

Sent from my SM-G900V using Tapatalk

 

[moehawk]

Nice hats and what a deal.

Sent from my SM-G900V using Tapatalk

Thanks Miklo!

 

[moehawk]

Don't know how I missed it earlier, but the Brent has an unreeded sweatband. That and the lack of a liner tip protector might make me reconsider the date to a bit earlier.

 

[mayserwegener]

"Orion", 58cm, Crown 6 inches Open, Brim 2 3/8 inches probably late 1930s. No company mark and most likely made of wool or wool / fur mix. This is a common man's hat that rarely survived. The felt has a great color and shine to it and can be modeled into any shape. Also I really interesting light weight liner. This is one of four hats that I recently found from the same source.

Open Crown

 

[G.W. Masters]

This is my first serious Fedora. Before this, I had a couple $15-20 Trilby style hats that I made part of my daily wardrobe and had erroneously described them as "Fedoras". When my girlfriend bought me a gift certificate to the local hat shop here in Seattle, I got some good education and walked away with a decent entry into the world of nice 'lids' (I'm going to need to practice with this term). I suspect that this will not be my last post on this thread as I already have my eye on two more hats.

 

[Redfokker]

"Orion", 58cm, Crown 6 inches Open, Brim 2 3/8 inches probably late 1930s. No company mark and most likely made of wool or wool / fur mix. This is a common man's hat that rarely survived. The felt has a great color and shine to it and can be modeled into any shape. Also I really interesting light weight liner. This is one of four hats that I recently found from the same source.

Open Crown

Another interesting hat Steve! The lacing all around the sweat is a neat feature. How can you tell about a wool/fur blend?

 

[Redfokker]

This is my first serious Fedora. Before this, I had a couple $15-20 Trilby style hats that I made part of my daily wardrobe and had erroneously described them as "Fedoras". When my girlfriend bought me a gift certificate to the local hat shop here in Seattle, I got some good education and walked away with a decent entry into the world of nice 'lids' (I'm going to need to practice with this term). I suspect that this will not be my last post on this thread as I already have my eye on two more hats.

Nice looking lid! Welcome to the lounge, stick around and you will learn a lot about your new addition. Now we need more information about this hat, what maker? Pictures of the liner and sweat band are also welcome. What hat store in Seattle. I have an old Homburg from Byrnie Utz downtown.