Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

ruvort

One of the Regulars
Messages
138
Location
Portland area
Thanks handsome [emoji4]. I so agree it's a brim up. It just does not work down. My next conundrum is to pinch or not to pinch. Kind of works both ways, but the jury's out at the mo.
0b6bf3f1d5dc9eed1f15d3efabf86056.jpg
55d1d78e9434bd7e8b75a32ed7808468.jpg


Sent from my HUAWEI VNS-L31 using Tapatalk
I'd give the "University Touch" method a try. They call it a snapped brim Homburg and there is an example of it in my recent thread: https://www.thefedoralounge.com/threads/apparel-arts-correct-hats-for-the-occasion.95305/

Sent from my PH-1 using Tapatalk
 

Steve1857

I'll Lock Up
Messages
8,829
Location
Denmark
I'd give the "University Touch" method a try. They call it a snapped brim Homburg and there is an example of it in my recent thread: https://www.thefedoralounge.com/threads/apparel-arts-correct-hats-for-the-occasion.95305/

Sent from my PH-1 using Tapatalk
Thanks for the advice and link, Ruvort. Interesting drawings. I tried the brim down on this Battersby when I got it, it just didn't work. Probably due to the fact that the brim is too wide. The Homburg on page 53 has a shorter brim.
This one is a bit of an anomaly. It seems to be a Fedora/Homburg hybrid. After I read your post, I tried the brim down again. Not right for this hat, it seems to me.
I'm experimenting at the moment with pinches, more brim curve instead of a flatter brim, and a more tapered front, almost coming to a point. It takes a lot of steam though as the felt on this one is particularly thin and not Homburg stiff at all. The felt on my previously "thinnest" Homburg is not as thin as this one.
I can feel, I'm going to be playing about with this Battersby for quite some time. And that's not a complaint [emoji4]


Sent from my HUAWEI VNS-L31 using Tapatalk
 

ruvort

One of the Regulars
Messages
138
Location
Portland area
Thanks for the advice and link, Ruvort. Interesting drawings. I tried the brim down on this Battersby when I got it, it just didn't work. Probably due to the fact that the brim is too wide. The Homburg on page 53 has a shorter brim.
This one is a bit of an anomaly. It seems to be a Fedora/Homburg hybrid. After I read your post, I tried the brim down again. Not right for this hat, it seems to me.
I'm experimenting at the moment with pinches, more brim curve instead of a flatter brim, and a more tapered front, almost coming to a point. It takes a lot of steam though as the felt on this one is particularly thin and not Homburg stiff at all. The felt on my previously "thinnest" Homburg is not as thin as this one.
I can feel, I'm going to be playing about with this Battersby for quite some time. And that's not a complaint [emoji4]


Sent from my HUAWEI VNS-L31 using Tapatalk
No worries at all. I just happened to come across that today and decided to mention it. Hopefully you find a look that suits the hat [emoji106]

Sent from my PH-1 using Tapatalk
 

Steve1857

I'll Lock Up
Messages
8,829
Location
Denmark
I thank you indeed for mentioning it, ruvort. It made me go back to the hat at once and try the University touch. As I said, it wasn't right for this hat. This encouraged me though to experiment with it once more. Thanks again.
No worries at all. I just happened to come across that today and decided to mention it. Hopefully you find a look that suits the hat [emoji106]

Sent from my PH-1 using Tapatalk

Sent from my HUAWEI VNS-L31 using Tapatalk
 

Steve1857

I'll Lock Up
Messages
8,829
Location
Denmark
I thank you indeed for mentioning it, ruvort. It made me go back to the hat at once and try the University touch. As I said, it wasn't right for this hat. This encouraged me though to experiment with it once more. Thanks again.

Sent from my HUAWEI VNS-L31 using Tapatalk
I'd give the "University Touch" method a try. They call it a snapped brim Homburg and there is an example of it in my recent thread: https://www.thefedoralounge.co...t-hats-for-the-occasion.95305/

I think you may well be right about how my Battersby was meant to have looked back in it's day, ruvort.
This photo posted by AbbaDatDeHat in another thread has helped me see it in another light. However, I still don't like it, so I'm going for another look as mentioned.
Thanks guys.
c054b07111e42d452e4c6d0e89c189d9.jpg


Sent from my HUAWEI VNS-L31 using Tapatalk
 

AbbaDatDeHat

I'll Lock Up
Messages
8,829
1EC18B64-DCCE-4660-9EC1-A80F88B11326.jpeg
Greetings All:
Boy....i can’t help myself. I keep coming back to look at this hat image!
I think this is one of the nicest hat images i have ever seen. It just stuns me everytime i look at it. I can’t even imagine touching it! Boy!!
There was a image of a white Cross Country awhile back that was close. Wish i’d saved it too.
 

Dlaniger

My Mail is Forwarded Here
Messages
3,305
Location
Philadelphia PA
I was very happy to come home today to find this Gledhill's waiting for me.

I bought it from our own @Bill Hughes, who was a pleasure to work with.

View attachment 141462 View attachment 141463 View attachment 141464

The hat is perfect for my physical makeup - A nice straight tall-enough crown, a moderate, for me, 2 1/4" brim, and a nice wide 2" ribbon. The front pinch is 4" high, which is right in my wheelhouse.

The hat has a c-crown, but I'll attempt to reshape it into a diamond just because I prefer them. A diamond will not increase the taper of the sides, as a center dent would (I already tried it).

As it happens, I bought another hat from Bill today before finding this one when I got home. Details to follow when I receive it.

One beautiful hat, Scotty! Love the color and shape.


Sent from my iPhone using Tapatalk
 
Messages
19,001
Location
Central California
I saw this Beaver Brand for sale and the photos were intriguing and the dimensions looked right. My curiosity got the better of me.

The seller’s photo:
9f4674c44dc74ca5cd3b3ab50d58d4d2.png


Nicely packaged, something I always appreciate:
195dac263fc7249ad107f052132e3e39.jpg


My hat:
770c08e5d40e2cc05f3c17af2cd81ef3.jpg


b3836a835eaf905a19ccdc82b53c9ecc.jpg


2953843f947e4e99e5875f91a9ee8e07.jpg


98609dc905076b0b54988ccfee018ee1.jpg


3d2bbb95ca2fe145a354af683c024000.jpg


13a2a2ac88e0dd5fe7ae2e420f6b2dd4.jpg


ac09292a8478efb7d30136c1590be12f.jpg


77cf5a3af564bdb0d3d8d1ac28ffc7f8.jpg


df5e64ec3bd73ea688868ec54663a6a1.jpg


7af92786706dde112e6bc3c6c11330f3.jpg


439f392949d37fe3b321926e510010fe.jpg


a874b139302af02a2bbffed08ba4a499.jpg


fbac14b99e50d0a889943a3903dd40bd.jpg


The brim has some seriously deep flanging! I’m curious who it’s original market was.
The open crown was right a 5 3/4” and the brim is 3.5”. The brim is stiff and the crown is reasonably soft. I tried creasing it more western but the hat just didn’t look right and I suspect it needs more crown height to pull off the western look. The felt is dense and smooth and the darker spots in the photos are from my spot cleaning with distilled water. Aside from arriving very dusty (nothing new there) and some easily removed spots it’s in excellent condition with no mothing. I’m not a Beaver Brand expert, but it seems to have some age to it.


Sent from my iPhone using Tapatalk Pro
 

Dlaniger

My Mail is Forwarded Here
Messages
3,305
Location
Philadelphia PA
19ed42db037caa54ae247a2b2e90c46d.jpg

Good evening. I lucked up and acquired this old Stetson. I was hoping some of you vintage hat aficionados could fill in the historical blanks about this particular model. Age? Place in the Stetson line hierarchy....?
f3ec82ac7ae86d0d14109683d505cfab.jpg
6a7a4049026e860a8a7adcddd9308296.jpg
75343d7fc4544c8b747a1828c7038db3.jpg
3ec1ce683062ae3ce8f67b016f525139.jpg
47852e969e3f40aa82c149ca9dee0701.jpg

The brim length is 2 3/4” and the open crown hight 5 1/2”
6a18a69f6d6aadff56f0136ae70a66ed.jpg
405186f00f2a557a008e714bc842c800.jpg

I have to say the felt is very nice and supple. It is still a work in progress as I attempt to nurse it back into form.
5fcca3e094e23ebcb55f6f5d5e8eed28.jpg
d1a69a8af4d6473b2e8cb0af6ca8792b.jpg

c695f7fde8c8bb6358821f09c8463172.jpg

Thanks for your help.


Sent from my iPhone using Tapatalk
 

AbbaDatDeHat

I'll Lock Up
Messages
8,829
I saw this Beaver Brand for sale and the photos were intriguing and the dimensions looked right. My curiosity got the better of me.

The seller’s photo:
9f4674c44dc74ca5cd3b3ab50d58d4d2.png


Nicely packaged, something I always appreciate:
195dac263fc7249ad107f052132e3e39.jpg


My hat:
770c08e5d40e2cc05f3c17af2cd81ef3.jpg


b3836a835eaf905a19ccdc82b53c9ecc.jpg


2953843f947e4e99e5875f91a9ee8e07.jpg


98609dc905076b0b54988ccfee018ee1.jpg


3d2bbb95ca2fe145a354af683c024000.jpg


13a2a2ac88e0dd5fe7ae2e420f6b2dd4.jpg


ac09292a8478efb7d30136c1590be12f.jpg


77cf5a3af564bdb0d3d8d1ac28ffc7f8.jpg


df5e64ec3bd73ea688868ec54663a6a1.jpg


7af92786706dde112e6bc3c6c11330f3.jpg


439f392949d37fe3b321926e510010fe.jpg


a874b139302af02a2bbffed08ba4a499.jpg


fbac14b99e50d0a889943a3903dd40bd.jpg


The brim has some seriously deep flanging! I’m curious who it’s original market was.
The open crown was right a 5 3/4” and the brim is 3.5”. The brim is stiff and the crown is reasonably soft. I tried creasing it more western but the hat just didn’t look right and I suspect it needs more crown height to pull off the western look. The felt is dense and smooth and the darker spots in the photos are from my spot cleaning with distilled water. Aside from arriving very dusty (nothing new there) and some easily removed spots it’s in excellent condition with no mothing. I’m not a Beaver Brand expert, but it seems to have some age to it.


Sent from my iPhone using Tapatalk Pro
Neat hat! Looks prime for a curl.
Too bad the seller tore up a perfectly good cooler! Or is that house siding insulation??
B
 
Messages
19,001
Location
Central California
19ed42db037caa54ae247a2b2e90c46d.jpg

Good evening. I lucked up and acquired this old Stetson. I was hoping some of you vintage hat aficionados could fill in the historical blanks about this particular model. Age? Place in the Stetson line hierarchy....?
f3ec82ac7ae86d0d14109683d505cfab.jpg
6a7a4049026e860a8a7adcddd9308296.jpg
75343d7fc4544c8b747a1828c7038db3.jpg
3ec1ce683062ae3ce8f67b016f525139.jpg
47852e969e3f40aa82c149ca9dee0701.jpg

The brim length is 2 3/4” and the open crown hight 5 1/2”
6a18a69f6d6aadff56f0136ae70a66ed.jpg
405186f00f2a557a008e714bc842c800.jpg

I have to say the felt is very nice and supple. It is still a work in progress as I attempt to nurse it back into form.
5fcca3e094e23ebcb55f6f5d5e8eed28.jpg
d1a69a8af4d6473b2e8cb0af6ca8792b.jpg

c695f7fde8c8bb6358821f09c8463172.jpg

Thanks for your help.


Sent from my iPhone using Tapatalk

I don’t know much about the hat; just that it’s an incredible piece. Nice score for certain.
 

Dlaniger

My Mail is Forwarded Here
Messages
3,305
Location
Philadelphia PA
What an enjoyable diversion this evening Stefan. I am so happy that my box finally made it pass the Customs Police, I hope they didn't throw you in jail as a smuggler when they opened it. You have fallen off the wagon in true form, I give you a 9.8! You didn't point your toes enough while in the air.
You said it, Red! I'm just catching up. Heck with all those hats there is no room to get on the wagon because its full. Now I really wonder what's in Stefan's attic.
 
Messages
19,001
Location
Central California
Neat hat! Looks prime for a curl.
Too bad the seller tore up a perfectly good cooler! Or is that house siding insulation??
B

It was foil backed styrofoam insulation of some sort. Very effective.

I can’t figure out what to do with the hat. The brim is out of proportion as it is. Maybe a looser curl of some sort? That big deep flange is throwing me.

And I keep looking at the black Tonak velour in the classifieds that @Tukwila is selling. I’ve come close to buying it half a dozen times. I was hoping someone else would buy it and remove the temptation.


Sent from my iPhone using Tapatalk Pro
 

Just A Hat Rack

Practically Family
Messages
619
Location
Buckeye Nation
It was foil backed styrofoam insulation of some sort. Very effective.

I can’t figure out what to do with the hat. The brim is out of proportion as it is. Maybe a looser curl of some sort? That big deep flange is throwing me.

And I keep looking at the black Tonak velour in the classifieds that @Tukwila is selling. I’ve come close to buying it half a dozen times. I was hoping someone else would buy it and remove the temptation.


Sent from my iPhone using Tapatalk Pro
That is some kind of hat Brent. I agree that the brim seems a bit out of proportion. My attempt at a suggestion would be to give the crown a center dent to try and give it a little more height. I have to say that a brim with that width looks a little funky with the flange it has. I'm not sure how much the felt would let you work with it, but I might try flattening it out and drooping the front and back of the brim. I'm sure there's a term for that. In any case, that's my two pennies.

Ryan
Hat size: 7 1/2
 
Messages
19,001
Location
Central California
That is some kind of hat Brent. I agree that the brim seems a bit out of proportion. My attempt at a suggestion would be to give the crown a center dent to try and give it a little more height. I have to say that a brim with that width looks a little funky with the flange it has. I'm not sure how much the felt would let you work with it, but I might try flattening it out and drooping the front and back of the brim. I'm sure there's a term for that. In any case, that's my two pennies.

Ryan
Hat size: 7 1/2

It’s an odd hat, Ryan. My concern is that it’s easy to flatten the brim, but hard to reflange it. Before I go for the irreversible flattening I want to explore my options. I tried it with a cattleman, Gus, and center dent first. The felt is reasonably compliant with steam. The center dent has the unfortunate tendency to give the crown taper whereas a diamond or teardrop tend to remove taper. I do want as little taper as possible.

I’m in the measure twice, cut once stage: I don’t want to make any substantial modifications until I’ve thought them through. A brim curl would take away some of the brim width. I can also trim the brim back incrementally until I like it. It’s just such an odd hat, and yet I can feel there is something cool hiding there if I could find a way to bring it out. I still wonder what market it was originally made for.


Sent from my iPhone using Tapatalk Pro
 

Forum statistics

Threads
109,097
Messages
3,074,090
Members
54,091
Latest member
toptvsspala
Top