Landman
One Too Many
- Messages
- 1,751
- Location
- San Antonio, TX
The Runabout is a neat looking hat. However, I have trouble seeing how a factory crease like that could be foldable. I hope it works for Stetson though.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Open Crown Stetsons: A Call (Plea) to Retailers!!
- Thread starter theinterchange
- Start date
jlee562
I'll Lock Up
- Messages
- 5,104
- Location
- San Francisco, CA
Another picture from Mr. Deckard's tumblr:
- Messages
- 10,524
- Location
- DnD Ranch, Cherokee County, GA
Matt putting it thru its paces...
http://instagram.com/p/cGHeRIItgK/
Wonder just how moderate that brim is???
Last edited:
Joshbru3
I'll Lock Up
- Messages
- 4,409
- Location
- Chicago, IL
I'm a sucker for Long hairs/Velours and I REALLY like Hatco's modern long hairs. Unfortunately the brims are usually really short on them. I have contemplated buying a modern long hair from them, taking it apart, and re-blocking it with a nice crown shape but the brims are too short to do that. I can, but it would most likely only yield a two inch brim. Matt posted THIS hat on his page not too long ago and I believe its one of the models he is experimenting with. I would be VERY VERY interested in one of these if he and Stetson are thinking of producing this......
The Wiser Hatter
I'll Lock Up
- Messages
- 4,765
- Location
- Louisville, Ky
Looking to pick up a Strat and Stetsonian calling Jeff.
now the 4 to 6 week wait begins. Jeff said to get order sin nowif you want to make sure you get one this fall.
now the 4 to 6 week wait begins. Jeff said to get order sin nowif you want to make sure you get one this fall.
Last edited:
I'm a sucker for Long hairs/Velours and I REALLY like Hatco's modern long hairs. Unfortunately the brims are usually really short on them. I have contemplated buying a modern long hair from them, taking it apart, and re-blocking it with a nice crown shape but the brims are too short to do that. I can, but it would most likely only yield a two inch brim. Matt posted THIS hat on his page not too long ago and I believe its one of the models he is experimenting with. I would be VERY VERY interested in one of these if he and Stetson are thinking of producing this......
Wow, now that is one snazzy looking hat! I have to admit I'd be interested in buying one of those as well should Stetson ever offer something similar.
Florida_Marlin
One of the Regulars
- Messages
- 238
- Location
- Georgia
Just ordered a Stetsonian!
- Messages
- 17,524
- Location
- Maryland
Josh, What is the black hat finish described as? Are the HatCo velours sourced? I remember your great rebuild but I seem to recall that was an older dead stock model (hat made by TONAK).
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
Joshbru3
I'll Lock Up
- Messages
- 4,409
- Location
- Chicago, IL
Matt didn't have a name under that hat, but I recognize that finish. Stetson and Dobbs often refer to that finish as a "silk finish" when being described on the Stetson website or a hatters website. The Dobbs I rebuilt was an older stock hat. The felt body was made by Tonak but I am unsure if Hatco just imports velour bodies for their hats or if they also import long hair bodies as well. I will say that the Velour body made by Tonak was very nice, but it was fairly thick. The Brewster by Stetson was also made in felt besides a straw version and had a silk finish. I have never felt one, but people on the lounge who have bought them have said that the felt is fairly lightweight, thinner, and pliable. I would have to imagine that if Tonak made both bodies, they would have similar features. [huh]
Here's some pics of the Brewster from Carldelo.....
http://www.thefedoralounge.com/showthread.php?43232-Stetson-Brewster-review
Received my Stetson Brewster from Sterling Leather yesterday - took some pictures this morning:
Last edited:
jlee562
I'll Lock Up
- Messages
- 5,104
- Location
- San Francisco, CA
Got my order in for a black Stratoliner...
- Messages
- 17,524
- Location
- Maryland
Josh, Thanks for the follow-up information! The Brewster does have a nice look to it. It would be interesting to know if the felt + finish is Hatco or sourced. By the way TONAK sent me some really nice (very soft + silver gray color) Velour samples (3 different finishes) a couple years ago but I misplaced / lost them.
Joshbru3
I'll Lock Up
- Messages
- 4,409
- Location
- Chicago, IL
I was very impressed with the Tonak hat body. It was felted very densely, the color was beautiful, the color saturation was perfect, it pulled on a block very nice and took a sharp flange perfectly. It was actually a pleasure to work with. If it was slightly thinner and just a touch less shellac, it would be perfect. The amount of shellac wasn't to bad, but with the thickness of the felt, steam was really needed to set a crease. I use steam to set all my creases anyways so I didn't mind, but the dry creasing ability of those wonderful pre-ww2 Austrian velours were fantastic. It's a shame that those samples that Tonak sent you are gone. I would have been really interested in seeing them.
- Messages
- 17,524
- Location
- Maryland
TONAK told me they could make them softer for hand creasing. I am not sure about lighter weights. They required a 60 order minimum so I chickened out (they agreed to late 30s Sigma Seal Velour dimensions). We will never see felt like the pre WWII stuff.
By the way really happy to see Hatco making this effort!
By the way really happy to see Hatco making this effort!
- Messages
- 10,939
- Location
- My mother's basement
Is that white "stitching" on the binding ribbon actually a print?
If so, is the binding stitched down with a transparent thread?
TheDane
Call Me a Cab
- Messages
- 2,670
- Location
- Copenhagen, Denmark
In the second picture in this post it seems to be stitched with a double needle machine and some kind of short "basting" stitches
Jeff,
Any idea on additional colors being offered for these in the future? And if yes, what those might be? Various types of grays I assume which is good and perhaps a more traditional Silver Belly are possible. I realize it may not be practical or possible for Hatco to go beyond that but an even larger palette of colors would be a dream come true. I'm sure I will by one or eventually two myself in these colors offered but since I already have many vintage and modern hats in all of the standard colors including what's being offered here even more colors would probably get me to buy a few more longer term. Just a hint...Thanks!
Walt
Any idea on additional colors being offered for these in the future? And if yes, what those might be? Various types of grays I assume which is good and perhaps a more traditional Silver Belly are possible. I realize it may not be practical or possible for Hatco to go beyond that but an even larger palette of colors would be a dream come true. I'm sure I will by one or eventually two myself in these colors offered but since I already have many vintage and modern hats in all of the standard colors including what's being offered here even more colors would probably get me to buy a few more longer term. Just a hint...Thanks!
Walt
Jedwbpm
One Too Many
- Messages
- 1,031
- Location
- West Coast Florida
Walt I know that Stetson is working on many things in the future and if these hats do well then I am sure we will see more colors and styles coming out of Texas.
Jeff
Jeff
Brad Bowers
I'll Lock Up
- Messages
- 4,187
To show my support for Hatco's effort, I just ordered a Stetsonian. I want them to succeed with this new direction. And Matt Deckard and HATCO, if you're listening, I have something to say to you..."Kudos, great job, and thank you for pursuing this!" Oh, and I'd still love to see a Dobbs Classic line. I know someone who's a bit of Dobbs expert if you need any assistance.
Looking forward to wearing this new Stetsonian.
Brad
Looking forward to wearing this new Stetsonian.
Brad
DOGMAN
One Too Many
- Messages
- 1,625
- Location
- Northeast Ohio
Emailed Mike the Hatter,to see if they could get the Stetsonian for me.They Emailed back that they checked the Stetson catalog and it was not in it.So they called to find out if the hat was available.Emailed me back that they could get this hat.Made me wonder if the hat shops don't know about these two hats how will Stetson sell a lot of them?Anyway because I'm a loyal customer they gave me a great deal.So I ordered the Stetsonian.
