Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Old gas stations

EngProf

Practically Family
Messages
608
I think that's a late-50s Studebaker Hawk, which the Boys had positioned to be the South Bend equivalent of the Ford Thunderbird -- a bourgie pseudo-sports car for the type of driver who didn't dare to go full-walrus with the whole sports car thing, but wanted to seem sportier than he actually was. This particular guy is probably less the Bold Innovator On His Way To The Top than he is Chip, the ineffectual middle son of the company founder who's just washed out of Brown, to come home to a mid-level managerial job in procurement. He hasn't got a chance with Priscilla Climthorpe du Sang-Bleu there, but he doesn't have the self-awareness to realize it.

That said, I remain baffled by that belt thing worn with the jack boots. I've never seen an outfit like that before, and if it isn't some kind of sporting gear the only other thing I can think of is that he's inviting Priscilla home to see his collection of whips, crops, and quirts. Ah, The Fifties.

To be a bit more specific, it's a 1957 Stude Golden Hawk. It was "in the ballpark" compared to other sports/performance vehicles of the time since it had 289 c.i., T-Bird had 292, and Corvette had 283.
It's real difference/claim-to-fame was that it had a belt-driven centrifugal McCullough supercharger that gave it 275 HP.
The top-of-the-line Corvette had fuel injection and 283 HP, so it was ahead, but not by a lot, just by the raw numbers. However, the Corvette engine was lighter and the vehicle had far more performance potential, so the S&M guy in the ad would be at a disadvantage in a Stude vs. Vette race.
As LizzieM said, the Golden Hawk was more in the T-Bird class than Corvette, i.e., "more show than go".
 

GHT

I'll Lock Up
Messages
9,796
Location
New Forest
3f5244675795ec2cc5a2496cb1413338.jpg
The horsepower analogy reminded me of a 50's/60's advert for Fina. The advert read: A fine filly of a fuel, or the last word might have been petrol. Can't find it anywhere.
Going back to that Buick. Was it not the aluminium 215 cubic inch block that became the Rover three and a half litre engine? When I researched it, there seems to be a myth on various forums that the design was in fact by BMW. I find that implausible, unless it was some sort of post war reparation. Anybody throw any light on it?
 

3fingers

One Too Many
Messages
1,797
Location
Illinois
Going back to that Buick. Was it not the aluminium 215 cubic inch block that became the Rover three and a half litre engine?
Yes The aluminum Buick engine was the base for the Rover engine. Didn't Rover stay with that basic design in varying displacements until the 1990's or later?
 

GHT

I'll Lock Up
Messages
9,796
Location
New Forest
Welcome to the automotive version of What’s My Line and guess today’s mystery guest…
I was born small and light, just 215 cubic inches and 318 pounds, in 1961 in Flint, Mich. I was raised in Europe. My corporate parents were General Motors, British Leyland/Rover Group, BMW AG and Ford Motor Co. I have worked for Buick, Oldsmobile, Pontiac, Rover, Land Rover, MG, Triumph, Morgan, Marcos, TVR and others.
Who – rather, what – am I?
If you said the venerable all-aluminium Fireball V8 engine that first saw duty in the 1961 Buick Special, you win. The lightweight V8, which GM ended up selling to Rover, turned out to be one of the industry’s longest-running and most versatile workhorses.
All my research and data I found on this informative website: https://www.aronline.co.uk/facts-and-figures/engines/engines-rover-v8/
 

EngProf

Practically Family
Messages
608
Welcome to the automotive version of What’s My Line and guess today’s mystery guest…
I was born small and light, just 215 cubic inches and 318 pounds, in 1961 in Flint, Mich. I was raised in Europe. My corporate parents were General Motors, British Leyland/Rover Group, BMW AG and Ford Motor Co. I have worked for Buick, Oldsmobile, Pontiac, Rover, Land Rover, MG, Triumph, Morgan, Marcos, TVR and others.
Who – rather, what – am I?
If you said the venerable all-aluminium Fireball V8 engine that first saw duty in the 1961 Buick Special, you win. The lightweight V8, which GM ended up selling to Rover, turned out to be one of the industry’s longest-running and most versatile workhorses.
All my research and data I found on this informative website: https://www.aronline.co.uk/facts-and-figures/engines/engines-rover-v8/
In its US models it came in both small Buicks and Oldsmobiles, and there were more differences in the cylinder heads, valves, and combustion chambers than the article implies. Buick heads kept their traditional "vertical-valve" or "nail-head" layout, as they were referred to by US hot-rodders. Olds heads, pistons, and combustion chambers were of more-conventional "wedge" design.
This resulted in clearly different outward appearance between the two heads.
Another big difference is that Olds offered a turbo-supercharged version in 1963. To get around the boost/detonation problem, Olds offered a water-methanol injection system using what they referred to as "Turbo Rocket Fluid". (just like WWII fighter planes) If you ran out of fluid there was a fail-safe boost-limiting mechanism to prevent detonation and engine damage.
One of the most unusual applications I can remember was a fuel dragster which used two 215 engines connected together in-line with a big GMC supercharger on each engine.
 
Messages
17,219
Location
New York City

LizzieMaine

Bartender
Messages
33,763
Location
Where The Tourists Meet The Sea
That's a very early specimen of the Gulf Icebox -- they hadn't quite standardized the design yet in the late thirties, and you got a lot of interesting variations like that center insert that didn't show up anymore once they locked in on the basic rectangular box format. The big distinguishing feature of the Gulf style was its use of rounded corners -- which allowed them to say they weren't flat out stealing Walter Teague's Texaco design.

Gulf also went in for neon more than any other oil company -- those big orange GULF letters were very common on the roofs of their stations, but you didn't see them so much as a roadside sign.
 

2jakes

I'll Lock Up
Messages
9,680
Location
Alamo Heights ☀️ Texas
Art Deco heaven - check
Awesome mullioned tilt windows - check
Iconic service truck - check
Cute fireplug out front - check
Boys from Marketing handiwork (Gulf "Pride") - check
And picture-perfect gas pumps - check

I guess this is what they mean by "it checks all the boxes."
9B93D55F-FE1F-4B87-BD16-4253BE12994F.jpeg

At first glance, I thought that was a port window on the left side door labeled "Women".
 
Messages
17,219
Location
New York City
View attachment 120101
At first glance, I thought that was a port window on the left side door labeled "Women".

Funny, I love the mullioned windows and the, what look likes, milky wavy glass ones at the entrance door, but wasn't quite sure about the port one on that door. It is an Art Deco look - and I like it - but just wondered about it as it was so different from all the other glass / windows.
 

LizzieMaine

Bartender
Messages
33,763
Location
Where The Tourists Meet The Sea
Gulf often used glass bricks as a design accent around its front doors during the early years of its "icebox" era. I think that's what's going on there.

It was very common for all companies to use pebbled glass on restroom windows to allow light to pass thru but not to allow anybody to see inside.
 

2jakes

I'll Lock Up
Messages
9,680
Location
Alamo Heights ☀️ Texas
Funny, I love the mullioned windows and the, what look likes, milky wavy glass ones at the entrance door, but wasn't quite sure about the port one on that door. It is an Art Deco look - and I like it - but just wondered about it as it was so different from all the other glass / windows.

I was wondering why would there be a window at all on that door with the
sign that reads, "WOMEN.

Edit;
I see that my wondering has been answered!
Thanks LM.
 

2jakes

I'll Lock Up
Messages
9,680
Location
Alamo Heights ☀️ Texas
Men & Women in Uniform!
84133F4C-FB85-4E9D-8F92-8B40E7B8B4D4.jpeg

1A92A720-6153-4225-BD9C-0F1319485928.jpeg

13F2CA71-C0C6-40E2-958A-F8113AAB5585.jpeg
745D35EA-F80D-4746-AEB0-5D9F4CB523C4.jpeg


Elizabeth, what's with the belt across his chest?
From your experience with gas stations was this common to wear
what looks like a dress shirt & tie
underneath the coveralls?

No wonder the dude looks unhappy!


Btw: I have coveralls with that material which is super comfortable
when doing chores.
 
Last edited:

GHT

I'll Lock Up
Messages
9,796
Location
New Forest
View attachment 120109
Elizabeth, what's with the belt across his chest?
From your experience with gas stations was this common to wear
what looks like a dress shirt & tie
underneath the coveralls?
No wonder the dude looks unhappy!
That small change dispenser that the forecourt attendant is wearing wouldn't last two minutes in this day and age. Not only would thieves relieve him of it, they would probably leave him unable to work for a month or two.
When you fill up at an all night garage in the UK, the main entrance will be locked, the cashier sits at a window and you have to pass your card, or pay cash up front.
 

2jakes

I'll Lock Up
Messages
9,680
Location
Alamo Heights ☀️ Texas
That small change dispenser that the forecourt attendant is wearing wouldn't last two minutes in this day and age. Not only would thieves relieve him of it, they would probably leave him unable to work for a month or two.
When you fill up at an all night garage in the UK, the main entrance will be locked, the cashier sits at a window and you have to pass your credit card, or pay cash up front.

I might add that the cashier at the all night gas pumps is in a
small room with steel bars all around.
The last time I saw a money changer was on a city transit bus back in the '60s.
 

Forum statistics

Threads
109,295
Messages
3,078,184
Members
54,244
Latest member
seeldoger47
Top