Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Messages
10,839
Location
vancouver, canada
Well, I purchased some Revlon Hair dye or maybe Hare dye since the fur felt is 100% rabbit, this time I went with a dark auburn color. I followed the instructions, except I added a equal amount of water, mixed everything up, then applied the dye using a paint brush, then I followed the instructions for the amount of time to leave the dye coated hat to soak and that was my mistake, wait time was only 30 minutes. I rinsed the dye out of the hat and put the hat back on the block to dry. The color either didn't take or it just slightly darkened the hat, so much that I can't even see a difference. I guess that I will try another dry in 2 weeks time.

This is the result of the second dye work. I did manage to get the wrinkles out, I am using a different method of blocking my hat felts after ironing the brim out nice and flat. I have been using a blocking spring and blocking cord when I put the hat body on the block, and I am thinking that maybe I need to buy a Tolliker, maybe using steam in combo with a Tolliker, setting the brim break maybe just a bit easier to do. Anyone have any suggestions about making a brim break?
View attachment 417829
View attachment 417831
I made my own tollicker......crude but it works.
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
Hi BB,

Well, I have decided to take a shot at making my own Tollicker also. I will be using the small one that I made a few months back and add a longer curved base to it, along with a lot of sanding and shaping, hopefully it will work out.
 

TWKundrat

One of the Regulars
Messages
104
Just finished a new one last night
IMG_20220414_230548894.jpg
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
I am moving really slow on the hat that I am making; I was able to locate some ribbon for the hat on Etsy, the color is called syrup. It is just a little darker than the hat color and I have decided to do a little pouncing on the hat all over then spray with alcohol and flame it just long enough to burn off the loose fibers. Then I need to decide to cut the brim down, I can cut it down to 3" wide or up to 3-1/2" wide. Then sew the brim binding in place, build a leather sweatband and stitch it in place, make a pencil curl and a 1" wide grosgrain ribbon hatband, black silk liner. This will take some time; I will be going into the local hospital Friday for a out patient procedure, but I will be back to finish this hat. Here are a few photos of the hat with the syrup colored ribbon. As you can see the brim is a darker color than the crown, maybe when I do some pouncing and flame it, there maybe some mottling, I will have to wait and see.
SDC10592.JPG
SDC10593.JPG

SDC10594.JPG
 
Last edited:

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
I started working on a new leather sweatband today. I have been busy hand sewing the reeding tape and reed onto the new leather strip that will be a sweatband, not sure how long this will take, my thread keeps getting twisted into knots. I guess that I will have to learn how to use a sewing machine, but then I am not sure how my wife's sewing machine will do with leather. Each stitch is about 1/8" apart and the leather is 25" long, the small plastic clips work great holding everything together as I sew.
SDC10608.JPG

SDC10617.JPG
 

ChicagoWayVito

Practically Family
Messages
699
I started working on a new leather sweatband today. I have been busy hand sewing the reeding tape and reed onto the new leather strip that will be a sweatband, not sure how long this will take, my thread keeps getting twisted into knots. I guess that I will have to learn how to use a sewing machine, but then I am not sure how my wife's sewing machine will do with leather. Each stitch is about 1/8" apart and the leather is 25" long, the small plastic clips work great holding everything together as I sew.
View attachment 428859
View attachment 428860
Mind sharing where you picked up reading tape?
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
It has been a while since I last posted anything, that was due to a few things, the last thing was attending a wedding, son got married after 15-year engagement, that is another story. Anyway, I recently finished all of the sewing on the sweatband. My next step will be to cut the brim down on the hat to 3 1/4", then stitch the sweatband into the hat after I add a small ribbon to the sweatband of course. Here are a few photos of the sweatband, so far.
SDC10623.JPG

SDC10624.JPG

SDC10625.JPG
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
This has to be my slowest pace for making a hat. I sewed the bow onto the sweatband today then decided to sew the sweatband into the hat and this is my progress so far. Next step, I will sew the ribbon, hatband in place complete with a bow and then the liner. Sewing the ribbon on the brim edge is going to be a learning experience, because it will be a first for me to sew the brim edge on and using a sewing machine, plus the sewing machine is a Singer, no guide to fold the ribbon.
SDC10626.JPG


SDC10629.JPG
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
Well, I am back, I have made a little more progress on my hat project. I watched a few videos on YouTube and tried a new way of making the hat band and bow a single complete unit, I figured out how to do it, however I decided to go with the old way and made the bow separate. For some reason the bow looked to long using the method of creating a complete bow-hat band unit. Any way here are a few photos of my progress so far. I have the brim binding clamped to the hat brim with metal clamps, the next step will be hand sewing the binding to the brim, this part will be interesting, the first time for brim binding for me, plus hand sewing it to the brim and getting the stitches spaced right.
SDC10637.JPG
SDC10638.JPG
SDC10639.JPG
SDC10640.JPG
SDC10641.JPG
SDC10643.JPG
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
Well, it took most of the day, but I managed to hand sew the brim binding into place. Hand sewing can be a challenge, the thread will twist into knots very easy, so you have to keep one hand on the thread as you pull the needle through the fabric, I know because I use a bit of time untying knots. Here are a few photos of the finished brim binding sewing, take a peek and let me know what you think.
SDC10645.JPG

SDC10646.JPG

SDC10647.JPG
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
After sewing the binding on the brim there are a few ways to go with this hat, I could make this hat into a Fedora with either a teardrop shape or the Indiana Jones bash, or I could make the hat a Fedora with a pencil curl, or I could keep the open crown and put a pencil curl in the hat.

The hat has a 3 1/4" wide brim and a 6" open crown.

I think that I will do an Indiana Jones Fedora bash on this hat, every time that I look at this hat, I think Fedora so that is what I will be doing. I will be working on that this evening; it might be a little difficult since I do not have a flange made for a wide brim, plus it has the hat band tacked in place. The only flange that I have that might be close is a 7 1/2" and 2 1/2" brim, so the brim curve might just be free hand.
 
Last edited:

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
Well, I decided to give this hat a Fedora bash with a flat brim slightly turned down in the front. The front has a tight pinch, and the top has a crease down the center. It would be easy to create a teardrop bash in the crown using this as a starting point. Any way here a few photos of the hat with the bash Fedora look and a photo of the silk liner installed. I think that I need to pay more attention when I am taking photos, believe it or not the brim is flat except for the front where it is turned down slightly, kind of a Snowy River style. Of course, if I am going for the Snowy River look, I will have to give the hat a teardrop bash. 
SDC10650.JPG

SDC10651.JPG

SDC10652.JPG

SDC10653.JPG
 
Last edited:

Art Fawcett

Sponsoring Affiliate
Messages
3,717
Location
Central Point, Or.
I like the changes you made to the bow, looks cleaner than it did before Sir. As for the thread twisting, run the thread through thread wax before starting. It won't completely clear up the problem but will help a lot.. Also, give the sweatband a slightly more angled cut before sewing the rear seam, it will help with the slight "pucker" in the sweat. Are you using ferrels in the sweat?
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
I am getting ready to start another hat, this time it is a dark Grey. I am going to make this hat into a Fedora with a black Grosgrain hat band and bow, I will be making another sweatband for this hat, the silk liner is black.
 

Attachments

  • SDC10665.JPG
    SDC10665.JPG
    590.3 KB · Views: 81
  • SDC10666.JPG
    SDC10666.JPG
    594.3 KB · Views: 77
  • SDC10667.JPG
    SDC10667.JPG
    595.4 KB · Views: 79

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
I like the changes you made to the bow, looks cleaner than it did before Sir. As for the thread twisting, run the thread through thread wax before starting. It won't completely clear up the problem but will help a lot.. Also, give the sweatband a slightly more angled cut before sewing the rear seam, it will help with the slight "pucker" in the sweat. Are you using ferrels in the sweat?
Hi Art,
Thank you, I made the corrections on the bow after someone else pointed out the problems with the bow work. I really appreciate the help, I am learning a lot. I never thought about using wax on thread for hat work, I use wax on thread when working with leather. I have two different type of wax, I have wax with glycerin and regular wax, the thread that I used on the brown hat for bow is a light weight. What angle should I cut the sweatband ends, I would like to avoid the pucker on the sweatband, I have been trying to figure out what I was doing wrong. I am using the little black metal Ferrals on my sweatbands and the reed is a small diameter. So far all dewing has been done by hand. Maybe I should check out a sewing machine to do a little sewing?
 

Darrell2688

A-List Customer
Messages
397
Location
Piner, Kentucky
Although all of sweat my work was by "eye", 5 to 7 degrees cut at the rear of the sweat usually works well. This is something you'll have to experiment with. A sewing machine was always my friend :)
I have been cutting the ends at 5 degrees, the problem may be that I am hand sewing the ends together, I cut the reed so it is about 1/2" longer than the sweatband and I have been sewing the reed tape onto the leather by hand also. Maybe I should look at buying a sewing machine? I checked out some Brother sewing machines today, maybe I could find one that will sew through leather, the leather that I am using is about 2mm thick. I will cut my next sweatband at 7 degree angle and see if that takes care of it.
 

Forum statistics

Threads
109,127
Messages
3,074,658
Members
54,105
Latest member
joejosephlo
Top