Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Goatskin vs Horsehide

Heiko

Familiar Face
Messages
95
Location
UK
Hello everyone:

I have been researching the differences between goat and horse hides because I am looking at different companies like Aero and Lost Worlds.

In my searches I have seen that some horsehide has a beautiful rich coppery brown that can sometimes be uneven while the goatskins are often much more uniform and less nuanced in colour. I have also found that goatskin is very durable and that it generally doesn't develop a rich patina. On the other hand, horsehide sometimes seems to develop these deep wrinkles that make the products look very distressed and somewhat ratty.

Are my novice observations accurate, and, if so, is the allure of horsehide more about historicity than functionality? They also seem so stiff early on, and I am unsure how that is an advantage. Can that coppery tone of horsehide be found with goatskin?:confused:
 

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
Based on my somewhat limited experience, I think that what you just said sounds reasonably accurate. Thus far, none of my goatskin jackets have changed at all from the day that I bought them, but my black vintage FQHH Aero Highwayman that is only a few weeks old is already changing appearance and softening. Since you are in the UK, I suggest that you contact Aero and ask then to send you samples of goat and HH for observation and comparison. Ask specifically for their russet goat sample. I bought an Aero A-2 in russet goatskin a few years ago. It is thicker than the goatskin on my Cooper and G&B jackets. Again, none of my goatskin jackets have aged on the outside though, including the Aero.
 

Silverpoint

New in Town
Messages
27
Location
Canada
Fanch- would you say that this lack of aging on the goat is because it holds onto the stain better, which would work against the development of a rich patina?
 

JanSolo

Practically Family
Messages
879
Location
Ever so sunny Westphalia, Germany
All of the aspects discussed above apply to both leathers. The method of tanning and the processing afterwards can be even more important than the properties of the bare skins.

Veg tanned goat with a light spray finish ages beautifully and will develop a rich patina over time. Chrome tanned, drum dyed and heavily spray finished hh (the stuff that Gibson& Barnes use) will not age at all because it's been covered and soaked with pigment.

This is what thick veg goat can look like. (Note the mottled finish of the spray finish):

3965580851_69f32684af_z.jpg


4975773687_4feb09ef1e_z.jpg


Seal spray finish HH, drum dyed, veg tanned, chrome re-tanned, very even (almost boring) surface:

6165424869_cf70ca4f39_z.jpg


Current military grade chrome tanned, drum dyed, thickly spray finished goatskin for G1 jackets. Hard to imagine this will ever properly age (although it looks nice):

6683727435_8b5f2d4b00_z.jpg


Drum dyed chrome tanned HH, NO surface finish, except for a very light clear aniline coat. A buttery soft and delicate leather that has to treated with care.

8299159365_e6e521bc09_z.jpg



As you can see the options are endless...there's no " horse is like this, goat is like that". I agree with the others: GET SAMPLES!! And don't forget to ask Aero for FQHH in all colours and also make sure to ask for some heavy weight steerhide.
 
Last edited:

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
I agree with what Jan said. When you receive the samples, pose the questions with Aero that you just brought up here. I believe though that goat has a reputation for being more resilient over a long period of hard use than horse, at least as a rule of thumb.
 

Heiko

Familiar Face
Messages
95
Location
UK
I greatly appreciate all your time and patience in explaining the differences Fanch and Jansolo. JanSolo's post has been really helpful in dispelling some of the misconceptions I had, so I thank you very much. Both of you are very kind.

One question still, how does Aero horse hide crease? Does it look too weathered? I saw a few examples of a longer horsehide, I think a Cheyenne Aero where the creasing around the buttons made the coat look ratty rather than gracefully aged. Is this typical? I will try to find the images to show later.

I am not particular to goat or horse, but I am very fond of this sort of colour and texture:
aero4.JPG


Ignoring the pajama pants:), what kind of skin is that? Is it front quarter horse hide (FQHH)? Can I get that colouration in a goatskin?
 
Messages
15,563
Location
East Central Indiana
Here's a pic of my Aero Highwayman (Heavy FQHH)..about a year or so old...

100_0411.jpg



..And after around 8 or 9 years old. Some of us call it gaining charactor rather than ratty. However..it may not be for you.

IMG_0114.jpg
 
Last edited:

JanSolo

Practically Family
Messages
879
Location
Ever so sunny Westphalia, Germany
That's Horween Front Quarter Chromexcell horsehide, Aero's trademark leather. No, goat can never look like that. Total different tanning (veg tanned, chrome re-tanned) and processing (hot stuffing with wax tallow and oil) and curing.

Creasing? You mean scratches? Those disappear with a hot, damp flanel and some conditioner. FQHH has a very open surface with no surface coating. It scratches easily but those "scratches" are just tiny distortions in the stuffed surface. Take you finger, apply some pressure and gently rub over a scratch....gone within seconds!
 

Sloan1874

I'll Lock Up
Messages
8,427
Location
Glasgow
That's Horween Front Quarter Chromexcell horsehide, Aero's trademark leather. No, goat can never look like that. Total different tanning (veg tanned, chrome re-tanned) and processing (hot stuffing with wax tallow and oil) and curing.

Creasing? You mean scratches? Those disappear with a hot, damp flanel and some conditioner. FQHH has a very open surface with no surface coating. It scratches easily but those "scratches" are just tiny distortions in the stuffed surface. Take you finger, apply some pressure and gently rub over a scratch....gone within seconds!

Got to say, my eyes widened the first time I scratched the surface. but as you say, I just rubbed with my thumb and it fades into the patina. All these little marks and bumps and scratches just merge and add to the overall look'.
 

Heiko

Familiar Face
Messages
95
Location
UK
I was hoping to find pictures of what I am describing so as to rule out the possibility that patina or "character" is something I do not like. I am still looking for the pictures though--around the buttons there was a sort of deep creasing and wrinkling that looked less like patina and more like tears.

I am quite confident I do like patina, I don't mind scratches here and there as well as colour variation.

I do like this coat Jan, do you still have it? Might it be too big for a man with a slight frame?

aeroo.jpg


I would like a longer coat in the FQHH but am unsure as to whether a long half belt or Cheyenne would be nice. Do you have any opinions about this model?
Cossack%20Front.jpg
 

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
Hoosierdaddy's pics look quite nice, if that is patina then I am all for it.

Heiko, why not consider Aero's Teamster, which appears to be similar to their Long Half Belt but with buttons instead of zippers, and with only two outside hand warmer pockets and buttoned cuffs. Overall a very clean look. IMO could be worn to work with shirt, tie, and slacks, or dressed down with jeans. My next Aero jacket, currently on order. :)
 

Heiko

Familiar Face
Messages
95
Location
UK
Wow, Fanch! You have many Aero jackets.

I do like your idea, and I was looking into examples:
20120309155701124.jpg


I have a build much like the gentleman above and this coat does appear quite bulky.

Also, what colour is the gentleman in the picture wearing? I do not like that colour, but I do like the reddish brown. When I make my order what colour should I mention?

I know many questions, but these jackets aren't cheap--I want to get it right the first time. I really am amazed by all the kind help!
 

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
Hoosierdaddy's pics look quite nice, if that is patina then I am all for it.

Yep, HoosierDaddy's jackets are aging better than he is (and me) heh, heh, heh :lol: :lol: :lol:
 
Last edited:

Sloan1874

I'll Lock Up
Messages
8,427
Location
Glasgow
The Teamster and LHB are fairly substantial jackets - they do good a job of keeping out the elements. That looks like a seal brown to me. Aero's FQHH has a far greater russet/copper undertone. The more knocks it gets, the more this is brought up. The arms gone from a deep chocolate to a lighter coppery tone, as have the shoulders (that's what a well-filled rucksack will do you for you) but the rest is catching up. I doubt the photos we see on the FL do any of these jackets justice, because the depth of the colour is something you have to see first hand.
 

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
Wow, Fanch! You have many Aero jackets.

I do like your idea, and I was looking into examples:
20120309155701124.jpg


I have a build much like the gentleman above and this coat does appear quite bulky.

Also, what colour is the gentleman in the picture wearing? I do not like that colour, but I do like the reddish brown. When I make my order what colour should I mention?

I know many questions, but these jackets aren't cheap--I want to get it right the first time. I really am amazed by all the kind help!

Heiko, if your build is similar to the gentleman's build above, you could probably order a sack cloth and look OK. :D The picture above is, as I recall, a heavily modified, shorter Teamster in brown goatskin. Normally, the Teamster does not have a breast pocket as shown on the above jacket, which IMO adversely affects an otherwise clean look. Take a look at wdw's black vintage FQHH that has a back length of 28.5 inches.
http://www.thefedoralounge.com/show...eamster-Pics&p=1473409&highlight=#post1473409

Also look at Dav's modified Teamster (no bi-swing back and no side straps) that has a back length of 29 inches.
http://www.thefedoralounge.com/showthread.php?66875-Plain-Teamster&highlight=aero+teamster

By looking carefully at both of those threads, you can get a good overall impression of the Teamster, and I modeled my Teamster currently on order largely from both of their jackets. I also used Sloan's LHB as a model too, and wdw, Dav, and Sloan were quite helpful to me through the process, as well as HD, who has forgotten more about all of this than most of us will ever know.
 

Forum statistics

Threads
109,293
Messages
3,078,110
Members
54,244
Latest member
seeldoger47
Top