Arlesia woolfelt feora. Size 56 with the overwelt brim at 5cm and the crwon at 11cm at the center dent. That it's at the bottom of the heap of this batch doesn't mean it's a bad hat. As far as woolfelts go it's quite good actually. What made me buy it is that I already own an Arlesia woolfelt brown lords hat I really like. No labels underneath the sweatband.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
French Hats and makers.
- Thread starter BellyTank
- Start date
Willoughby camber style hat in grey. Size 57 with the overwelt brim at 5cm and the crown at 10,5cm at the center dent. Unlined but it did have a liner once. Likely a Madelios liner, the retailer for which it was made. No labels underneath the sweatband except a small size indicator. This one came with a small bluejay feather. The quality is everything we've come to expect from Willoughby.
The maker isn't French, but it was sold under a French brand name. Another Willoughby in grey. Prince IV model, camber style with the overwelt brim at 5cm and the crown at 10,5cm at the center dent. Satin finish and the sweatband states "made in Italy". The label gives it away as being made by Barbisio, even though the cut away that part of the label. The colour is called "rimini" and the finish is called "taupe". Was sold to me as a size 57, but I don't think it is; fits like a 56.
Tirard Supra in brown, called Beaune (a placename). Size 59 with the raw edge brim at 7cm and the crown at 10cm at the center dent. I haven't found any information about what the "supra" stands for as a designation, but it wouldn't suprise me if it means theere is beaver content in the felt. The hat has the tight felted sturdiness of beaver, without being stiff. Lovely hand to the felt as well. Shame it isn't my size.
- Messages
- 15,083
- Location
- Buffalo, NY
An unusual French corker.
MikeinRome
One Too Many
- Messages
- 1,017
MikeinRome
One Too Many
- Messages
- 1,017
No more pics, at least not now Someone sent that pic to me asking for help to ID it. I've asked for any other pics that might help.
Hard to ID a hat from the shop. However, Lucien de Brabant et Frére were top notch.
What condition the hat is in is another question.
MikeinRome
One Too Many
- Messages
- 1,017
So that's the shop? Yes, I can see it now, thanks. Here's another photo, but you can't make out anything in the liner. The person wanting help isn't helping much with pics. Anyway, this hat is on eBay for $185. Has 2 inch brim. Listed as a Lucien Brabant. Size 60 cm.
Attachments
Last edited:
Lucien de Brabant & Frére often had that logo on the liner, too.
Hard to tell who their supplier was, but it would definitely be a good one.
Again, need more photos of the hat in question.
Bought at the same time and came with a box (sans lid though).
Motsch hat in grey/taupe colour called selce (flint). Size 57 with the overwelt brim at 5cm and the crown at 10cm at the center dent. Very soft felt with hardly any stiffener it seems. didn't call it a fedora, because it leans more towards the camber style that was so popular in France. This one was made in Italy for Motsch, but the label doesn't give us any clues who made it. Not the finest Motsch I've handled; the ribbon work looks a bit hurried, but still a nice find.
It's a true 57, so too roomy for me.
Motsch hat in grey/taupe colour called selce (flint). Size 57 with the overwelt brim at 5cm and the crown at 10cm at the center dent. Very soft felt with hardly any stiffener it seems. didn't call it a fedora, because it leans more towards the camber style that was so popular in France. This one was made in Italy for Motsch, but the label doesn't give us any clues who made it. Not the finest Motsch I've handled; the ribbon work looks a bit hurried, but still a nice find.
It's a true 57, so too roomy for me.
Bought at the same time with what? Well, with this other Motsch of course.
Motsch foulard hat in black. Size 57 with the overwelt brim at 5,5cm and the crown at 10cm at the center dent. This the earlier hat of the two. Same camber style as the other one, but this is the earlier hat and the better one of the two. Soft and springy felt, which resists easy creasing somewhat. Even more roomy than the other one. All in all a very nice and well made hat.
Motsch foulard hat in black. Size 57 with the overwelt brim at 5,5cm and the crown at 10cm at the center dent. This the earlier hat of the two. Same camber style as the other one, but this is the earlier hat and the better one of the two. Soft and springy felt, which resists easy creasing somewhat. Even more roomy than the other one. All in all a very nice and well made hat.
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
Morreton Prestige Chamois in blue (navy). Size 56 with the overwelt brim at 7cm and the crown at 10cm at the center dent. The proportions are spot on and the crown looks more generous than its measurements suggest. The overwelt is extremely narrow and even. The hand of the felt is nice, but doesn't scream "chamois" finish right away. You could be forgiven for thinking it was a regular felt. Its best feature by far is the glorious blue colour: not too close to black to notice and not too blue to be garish.
- Messages
- 15,083
- Location
- Buffalo, NY
Mean Eyed Matt
One Too Many
- Messages
- 1,142
- Location
- Germany
What a beauty!
Beautiful. Classic style with just the right amount of reverse taper.
- Messages
- 15,083
- Location
- Buffalo, NY
There is a bit of an outward taper in the photo... mostly from the cell phone camera distortion but perhaps a little from the deep center dent as well. Viewed with the crown open it is a very straight blocking. This is one of the hats that came from a stash of NOS pieces purchased by former esteemed member RLK and shared with a few members here.
This hat was generously gifted to me by Daniele @Daniele Tanto. So a big thank you goes to Verona for this one. Funny thing is I've never seen a Fléchet homburg before. Apparently not a model they saw as a market for them. They probably should have though, because it's a very fine quality hat.
Fléchet qualité superieure homburg in dark brown. Size 56 with the bound brim at 6cm and the crown at 11cm at the center dent. Liner used to have a cellophane covering as there are traces of it left on the liner. Nice hand to the felt, but it takes a bit of work to shape it.
Fléchet qualité superieure homburg in dark brown. Size 56 with the bound brim at 6cm and the crown at 11cm at the center dent. Liner used to have a cellophane covering as there are traces of it left on the liner. Nice hand to the felt, but it takes a bit of work to shape it.
Daniele Tanto
I'll Lock Up
- Messages
- 4,253
- Location
- Verona - Italia
I buy fewer and fewer hats, but the ones that arrive under the wisteria must have some particular quality.
This Flechet is a top class homburg with fantastic color and the finish is superb.
Bought blind it turned out to be a size too small, so who better to wear it than Stefan?
He is another passionate for French hats so I like to see it photographed and worn, here it was enclosed in a cardboard cage without air. It is a pity
This Flechet is a top class homburg with fantastic color and the finish is superb.
Bought blind it turned out to be a size too small, so who better to wear it than Stefan?
He is another passionate for French hats so I like to see it photographed and worn, here it was enclosed in a cardboard cage without air. It is a pity
Similar threads
