Footwear to go with our jackets

[jeo]

Mine are the lot. 444. (black veg tan horsebutt.) Just email them and tell them which size you want. I would suggest going over to their website/online store first to make sure your size is in stock.

Thanks!

 

[hondurasdave47]

Blundstone has a 25% off sale tomorrow

Thanks, B. My wife has been eyeing a pair of green Blunnies.

 

[Psant25]

Blundstone has a 25% off sale tomorrow

Thanks for sharing. Wear my 500s all the time letting dogs out or if it is a sloppy day.

 

[Bfd70]

I’m hooked. Bought 3 pairs this year. 2 for work and one for knockin around.

 

[Jin431]

Dude, I wish I had discovered quality socks earlier in life. Getting over the hump of paying $20/pair was difficult, but I'm a Darn Tough convert. When you think about how comfortable good socks are, the cost per wear, and the fact you wear them daily, it makes sense to forgo the Costco pack and treat yo'self.

I always wore the thorlos padded socks for work but it's too short for boots then I tried the Filson socks and those are great to wear as well. I will try the darn tough socks out too. It's really important for me and I can't wear regular socks anymore.

 

[dudewuttheheck]

We're in the top five now for my boot collection list. Next up are my John Lofgren engineer boots in natural Horween CXL cowhide


These were my first high quality casual boots that I bought and I fortunately still have them today. They are wonderful boots and I am really glad to have bought these as my first truly high quality boots. These beauties are wonderfully designed, finely crafted, and have stood up well over time, remaining comfortable for me to wear. John took a very long time designing these and you can see that. A lot of brands spend no time making engineer boots, either giving them stupidly bulbous toes or try to make them too slim by using derby shoe lasts for engineers which is also not a good idea. John Lofgren's last is bespoke for his engineer boots and it really shows. It is not overly slim and not overly bulbous either. Perfectly balanced.

As with the Role Clubs, by far the worst part of these boots is the leather. I understand why John Lofgren uses CXL. It’s easier to work with and more consistent than other more exciting leathers, but that does not mean that I do not wish that these boots had a better leather. As much as I love these boots, these have the highest chance of moving downward and it is mostly because of the dull, boring leather that is CXL. Natural CXL isn't even natural. It has that gross grey/blue tinge thanks to the chrome tanning. It has improved with age for sure, but a vegetable tanned leather would look even better. Other than that, these boots are fantastic. High quality construction, materials, design, and the comfort is fantastic for me as well.

 

[Serghei Velescu]

@dudewuttheheck thanks for all the updates. I learn a lot from your reviews. I also prefer brown boots than black ones but the black Maryam horsebutt is my favorite black leather at this time. What else is there for black Leather consideration?


Tobacco Badalassi Monkey Boots by Junkard Co

View attachment 322273

View attachment 322272


View attachment 322271

How comfortable are monkey boots?

looking at the John Lofgren monkey boots and wonder are they worth it their price tag.
Anyone got some boots from John Lofgren? Are they so good?

 

[Pandemic]

2 Truman service boots in java horse **** and aubergine horse ****
1 Benzein lace up boots T Moro Horse Rump
1 onderhoud Engineer Black horse rump
1 flame panda monkey boot black horse rump

You could say I'm a (horse) **** kind of guy lol

I’m looking forward to seeing your onderhouds.

I’m still toying with the idea of another pair of engineers. Seeing all @dudewuttheheck ’s Japanese dress engineers has certainly given me the itch. With my wide feet, options are more limited. I don’t think I have the patience to wait for Role Clubs so an Indo boot is appealing.

 

[Ayeteael]

We're in the top five now for my boot collection list. Next up are my John Lofgren engineer boots in natural Horween CXL cowhide


These were my first high quality casual boots that I bought and I fortunately still have them today. They are wonderful boots and I am really glad to have bought these as my first truly high quality boots. These beauties are wonderfully designed, finely crafted, and have stood up well over time, remaining comfortable for me to wear. John took a very long time designing these and you can see that. A lot of brands spend no time making engineer boots, either giving them stupidly bulbous toes or try to make them too slim by using derby shoe lasts for engineers which is also not a good idea. John Lofgren's last is bespoke for his engineer boots and it really shows. It is not overly slim and not overly bulbous either. Perfectly balanced.

As with the Role Clubs, by far the worst part of these boots is the leather. I understand why John Lofgren uses CXL. It’s easier to work with and more consistent than other more exciting leathers, but that does not mean that I do not wish that these boots had a better leather. As much as I love these boots, these have the highest chance of moving downward and it is mostly because of the dull, boring leather that is CXL. Natural CXL isn't even natural. It has that gross grey/blue tinge thanks to the chrome tanning. It has improved with age for sure, but a vegetable tanned leather would look even better. Other than that, these boots are fantastic. High quality construction, materials, design, and the comfort is fantastic for me as well.

Those look fantastic. I picked up a pair from S&S but returned them bc I couldnt get over the bulbous toe (which I cannot stomach). I much prefer the sleeker/collapsed toe look on engineer boots, but that's just my preference.

 

[Ayeteael]

I’m looking forward to seeing your onderhouds.

I’m still toying with the idea of another pair of engineers. Seeing all @dudewuttheheck ’s Japanese dress engineers has certainly given me the itch. With my wide feet, options are more limited. I don’t think I have the patience to wait for Role Clubs so an Indo boot is appealing.

I've got black maryam horsebutt engineers coming from FlamePanda. Last I checked, they should be completed any day now. I ordered in early September, so the wait is stout (and getting worse) but I'm super excited to receive them. I'm basically trying to recreate the japanese look with Peng because I also have wide feet (I'm a 10F in Nicks and 10.5E in alden barrie) and I'm afraid I won't fit in their stock boots.

 

[Pandemic]

I've got black maryam horsebutt engineers coming from FlamePanda. Last I checked, they should be completed any day now. I ordered in early September, so the wait is stout (and getting worse) but I'm super excited to receive them. I'm basically trying to recreate the japanese look with Peng because I also have wide feet (I'm a 10F in Nicks and 10.5E in alden barrie) and I'm afraid I won't fit in their stock boots.

Thanks - can't wait to see them! I'm a EEE in everything, so there is no way I am fitting into any of those lovely and elegant Japanese boots. Six months isn't too bad a wait - I think my Wescos were close to that.

 

[Mich486]

Many Japanese engineers boots can be deceiving. They just use a small dress shoe type welt adding to the sleek profile but the toe box can be pretty accomodating. I also think I read somewhere that eastern Asian feet are on average on the wide side.

My foot isn’t on the thin side either and I find Attractions (for instance) having plenty of toe box space. Clinch CN last probably won’t work if you have crazy wide feet but all I’m saying though is that if your foot is on the wide side and get used to see those big *** double or triple stacked soles (imho ugly) with double stitched welts used by some makers, you might conclude that a sleek engineer boot isn’t for you and I think it can be a mistake.

 

[Pandemic]

Many Japanese engineers boots can be deceiving. They just use a small dress shoe type welt adding to the sleek profile but the toe box can be pretty accomodating. I also think I read somewhere that eastern Asian feet are on average on the wide side.

My foot isn’t on the thin side either and I find Attractions (for instance) having plenty of toe box space. Clinch CN last probably won’t work if you have crazy wide feet but all I’m saying though is that if your foot is on the wide side and get used to see those big *** double or triple stacked soles (imho ugly) with double stitched welts used by some makers, you might conclude that a sleek engineer boot isn’t for you and I think it can be a mistake.

Thanks. Pretty sure I won't get an EEE fitting off the shelf from Japan. I have a pair of chunky Wesco engineer boots that are incredibly comfortable. Next-up I'd love to get something more sleek and refined like a Clinch, but that would fit my big old duck feet.

 

[Pandemic]

Benzein just sent me a list of the leathers he has in stock right now. The Cloe horsebutts and Badalassis look beautiful, though it is hard to get a sense of how thick they are.

 

[Blackadder]

My fd came by to try on some of my boots. He took a photo.
Boulet, Clinch NPT Latigo, Buco shell cordovan, Buco polished steerhide, Wesco Boss domain, Attractions Lot 268 HB, Attractions Lot 444 HB 2 tone, Motor 3rd gen CXL, Motor Dress HB, Viberg roughout.

 

[dudewuttheheck]

How comfortable are monkey boots?

looking at the John Lofgren monkey boots and wonder are they worth it their price tag.
Anyone got some boots from John Lofgren? Are they so good?

I just posted my Lofgren engineers. Lofgren boots are indeed extremely high quality. I love mine.

Those look fantastic. I picked up a pair from S&S but returned them bc I couldnt get over the bulbous toe (which I cannot stomach). I much prefer the sleeker/collapsed toe look on engineer boots, but that's just my preference.

I would not call the toe bulbous at all. It isn't as sleek as some makers, but it's way sleeker than Red Wing and Real McCoys for example. However, if you want something sleeker, look at Motor, Clinch, Role Club, and Attractions. Mister Freedom would be good as well when those finally come back in stock.

 

[Ayeteael]

I just posted my Lofgren engineers. Lofgren boots are indeed extremely high quality. I love mine.



I would not call the toe bulbous at all. It isn't as sleek as some makers, but it's way sleeker than Red Wing and Real McCoys for example. However, if you want something sleeker, look at Motor, Clinch, Role Club, and Attractions. Mister Freedom would be good as well when those finally come back in stock.

Fair enough, but...

 

[dudewuttheheck]

You're being very un-dude for disagreeing with me

 

[jglf]

I've got black maryam horsebutt engineers coming from FlamePanda. Last I checked, they should be completed any day now. I ordered in early September, so the wait is stout (and getting worse) but I'm super excited to receive them. I'm basically trying to recreate the japanese look with Peng because I also have wide feet (I'm a 10F in Nicks and 10.5E in alden barrie) and I'm afraid I won't fit in their stock boots.

I ordered mine in early November, so I guess Peng’s initial wait time of 4 months is getting pushed back by a few months.

 

[Jin431]

I’m looking forward to seeing your onderhouds.

I’m still toying with the idea of another pair of engineers. Seeing all @dudewuttheheck ’s Japanese dress engineers has certainly given me the itch. With my wide feet, options are more limited. I don’t think I have the patience to wait for Role Clubs so an Indo boot is appealing.

I'll update you as soon as I can about them. I hope I am ready for them bad boys

I looked into RC's as well, I was told 30 months wait time so no can do lol
That's hopefully something that can be made for you but it's always scary to order if you can't guarantee the fit