Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Footwear to go with our jackets

Harris HTM

One Too Many
Messages
1,883
Location
In the Depths of R'lyeh
Deceptive wording on their website if they're manufacturing elsewhere.

"We are committed to expanding our British manufacturing and working with some of the finest material suppliers in the UK and around the world. LANX's commitment to British manufacturing extends beyond footwear; with socks made in Leicestershire, clothing sewn in Greater Manchester, and shoe boxes made in Lancashire."
Maybe they do offer some collections made in the UK?
 

Harris HTM

One Too Many
Messages
1,883
Location
In the Depths of R'lyeh
Crockett & Jones Connaught Oxfords.
20240701_152034.jpg
20240701_152010.jpg
20240701_152020.jpg
 

AeroFan_07

I'll Lock Up
Messages
5,699
Location
Iowa
New whites…Why is it so hard? Im done…
View attachment 622393
What the crap?!

That's not even close to anything I would expect for Any PNW manufacturer or even an overseas-sourced Red Wings.

Granted Moc-Toe is a new venture for White's and none of mine have this design, honestly speaking I do not prefer it. However this is really shoddy. What model is this? And did you order it through Baker's Shoes in Oregon? That's a pretty good deal overall - better service & lead times, easier returns if needed, and an extra measure of QC along the way.
 

Psant25

One Too Many
Messages
1,607
What the crap?!

That's not even close to anything I would expect for Any PNW manufacturer or even an overseas-sourced Red Wings.

Granted Moc-Toe is a new venture for White's and none of mine have this design, honestly speaking I do not prefer it. However this is really shoddy. What model is this? And did you order it through Baker's Shoes in Oregon? That's a pretty good deal overall - better service & lead times, easier returns if needed, and an extra measure of QC along the way.
This was a stock model Perry moc toe distressed leather, picked it up from White’s direct during their sale.
 

BloodEagle

Practically Family
Messages
518
Location
UK
I took delivery of my much researched John Lofgren Engineers in natural CXL earlier today. Very nicely presented and packaged, smelt lovely, and constructed to an extremely high standard - but I couldn't get them on for the first 5 minutes of trying.

Thus ensued a potential nightmare scenario, where I couldn't get them on try on properly without some firm gripping and pulling, but I couldn't crease or otherwise mark them in case I wanted to send them back. I dug deep, and with my father's oft-repeated phrase that 'nothing good comes without hard work' at the forefront of my mind, I persevered and managed to get them both on.

As soon as they were on I immediately knew I was going to keep them, they were supremely comfortable, they fit exactly how I wanted them to (a little heel slip but nothing too much) and looked extremely cool - if, at this early stage, a little (well, a lot actually)anaemic what with them being brand new natural CXL. Fingers crossed they will darken up a bit in the sun and with just general wear.

I went with as US 11.5, so one half size down from my brannock measurement and, despite the initial issue with getting the buggers on, the feel really really great. They're pretty spendy, and Ive certainly never considered laying out so much on footwear before, but I'm really happy. Thanks for the sizing tips from earlier in this thread, here's a few first 30 minutes pics for anyone interested.

PXL_20240702_093127224.jpg
PXL_20240702_093156391.jpg
PXL_20240702_100504290.jpg
PXL_20240702_100837049.jpg
PXL_20240702_101049024.jpg
 

Tom71

Call Me a Cab
Messages
2,691
Location
Europe
I took delivery of my much researched John Lofgren Engineers in natural CXL earlier today. Very nicely presented and packaged, smelt lovely, and constructed to an extremely high standard - but I couldn't get them on for the first 5 minutes of trying.

Thus ensued a potential nightmare scenario, where I couldn't get them on try on properly without some firm gripping and pulling, but I couldn't crease or otherwise mark them in case I wanted to send them back. I dug deep, and with my father's oft-repeated phrase that 'nothing good comes without hard work' at the forefront of my mind, I persevered and managed to get them both on.

As soon as they were on I immediately knew I was going to keep them, they were supremely comfortable, they fit exactly how I wanted them to (a little heel slip but nothing too much) and looked extremely cool - if, at this early stage, a little (well, a lot actually)anaemic what with them being brand new natural CXL. Fingers crossed they will darken up a bit in the sun and with just general wear.

I went with as US 11.5, so one half size down from my brannock measurement and, despite the initial issue with getting the buggers on, the feel really really great. They're pretty spendy, and Ive certainly never considered laying out so much on footwear before, but I'm really happy. Thanks for the sizing tips from earlier in this thread, here's a few first 30 minutes pics for anyone interested.

View attachment 624507 View attachment 624508 View attachment 624509 View attachment 624511 View attachment 624510

Congrats on a pair of supernice boots! IMO the nicest pair of Engineers around.

This is exactly the style that I tried on in a variety of sizes but couldn´t make to fit. The ones that would have fit, I couldn´t slip on, the ones I managed to get on were too large. Glad you made it work!
 

lina

One Too Many
Messages
1,053
Location
Washington DC
I took delivery of my much researched John Lofgren Engineers in natural CXL earlier today. Very nicely presented and packaged, smelt lovely, and constructed to an extremely high standard - but I couldn't get them on for the first 5 minutes of trying.

Thus ensued a potential nightmare scenario, where I couldn't get them on try on properly without some firm gripping and pulling, but I couldn't crease or otherwise mark them in case I wanted to send them back. I dug deep, and with my father's oft-repeated phrase that 'nothing good comes without hard work' at the forefront of my mind, I persevered and managed to get them both on.

As soon as they were on I immediately knew I was going to keep them, they were supremely comfortable, they fit exactly how I wanted them to (a little heel slip but nothing too much) and looked extremely cool - if, at this early stage, a little (well, a lot actually)anaemic what with them being brand new natural CXL. Fingers crossed they will darken up a bit in the sun and with just general wear.

I went with as US 11.5, so one half size down from my brannock measurement and, despite the initial issue with getting the buggers on, the feel really really great. They're pretty spendy, and Ive certainly never considered laying out so much on footwear before, but I'm really happy. Thanks for the sizing tips from earlier in this thread, here's a few first 30 minutes pics for anyone interested.

View attachment 624511
They look great… And in a year will look even greater! Very cool.
 

BloodEagle

Practically Family
Messages
518
Location
UK
John Lofgren Engineers 1 week update. Have been wearing these pretty solidly all week - putting them on has got easier, and the natural CXL has all over got a lot more pliable, with some nice patina in the works. The picture doesnt really show it too well but hey've darkened I would say a fair amount perhaps because I have been wearing them a lot. Currently trying to resist the urge to buy some black engineers of some description
PXL_20240709_145400999.jpg
 

Tom71

Call Me a Cab
Messages
2,691
Location
Europe
Quick question for those in the know:

I there a noticeable difference in quality for „Dr. Martens Made in England“ as opposed to their regular/„icons“ line?
 

BloodEagle

Practically Family
Messages
518
Location
UK
Quick question for those in the know:

I there a noticeable difference in quality for „Dr. Martens Made in England“ as opposed to their regular/„icons“ line?
Yes, quite a difference - I wouldnt buy the regular line as they are very much a low quality cosplay of what a Dr Marten boot used to be these days. By way of contrast the Made in England line use better materials, have a better sole, and just feel altogether much better constructed than the cheaper version. I would take a pair of Solovair over either though realistically - made in the sanme factory using the same processes and materials that Dr Martens used to be before they were sold, production was shipped to the far east, and quality dipped.
 

Tom71

Call Me a Cab
Messages
2,691
Location
Europe
Yes, quite a difference - I wouldnt buy the regular line as they are very much a low quality cosplay of what a Dr Marten boot used to be these days. By way of contrast the Made in England line use better materials, have a better sole, and just feel altogether much better constructed than the cheaper version. I would take a pair of Solovair over either though realistically - made in the sanme factory using the same processes and materials that Dr Martens used to be before they were sold, production was shipped to the far east, and quality dipped.

Thanks a lot! That’s exactly the kind of intel I had been looking for.

After my most recent trip to London, I have found a new desire to dress more „British“ once in a while. I don’t really mind the quality of the current boots for very occasional wear, but higher sense of quality always translates into more fun for me personally.
I quite like the looks of the red „made in England“ 1460 boots, so I guess I will give them a try now…
 

barnabus

One Too Many
Messages
1,483
Location
Britain's oldest recorded town
John Lofgren Engineers 1 week update. Have been wearing these pretty solidly all week - putting them on has got easier, and the natural CXL has all over got a lot more pliable, with some nice patina in the works. The picture doesnt really show it too well but hey've darkened I would say a fair amount perhaps because I have been wearing them a lot. Currently trying to resist the urge to buy some black engineers of some description
View attachment 625860

I'm curious, presumably you're wearing these with your jeans not tucked in? Is there any noticeable difference between the darkening on the leather of the foot compared to the shaft of the boot where they're hidden?

It doesn't look from your photo like there's any difference, but I suppose I would expect there to be.
 

BloodEagle

Practically Family
Messages
518
Location
UK
I'm curious, presumably you're wearing these with your jeans not tucked in? Is there any noticeable difference between the darkening on the leather of the foot compared to the shaft of the boot where they're hidden?

It doesn't look from your photo like there's any difference, but I suppose I would expect there to be.
Yes, these are worn with jeans not tucked in. No noticeable difference in the leather darkening between the two areas that I can tell - I dont think its necessarily the exposure to sunlight which has had any effect - just wearing them around the house for a day I suppose made the oils move around in them a bit and darken them.
 

Forum statistics

Threads
109,092
Messages
3,074,000
Members
54,091
Latest member
toptvsspala
Top