Mysteryo
One Too Many
- Messages
- 1,319
- Location
- Nantes (FR)
I was lucky enough to grab what seems to be a 30’s west coast jacket, a couple of years ago.
Its a beautiful and rare « aviator’s » type, alike those made by Ralph Pugh, or Block Bilt... Made of a nice sheepskin (not 100% sure) in an overall god condition for it’s age but a short and also fragile.
I took the decision of having it reproduced by 5 Stars, after unsuccessfully offering it to remake by Norshor Leather or Field Leathers.
Shawn/Ali accepted right away and I sent the jacket to Pakistan, where it arrived safely.
I had prepared an illustrated note to explain the tweaks I expected on the remake, as well as the specifications on leather, lining, hardware…
Required Specs:
*30’s Sport Jacket repro*
-seal brown HH 1,2mm
-green/gold satin lining for body
-black satin lining for sleeve
-n°3 repro talon zipper for chest pockets
-n°5 repro talon zipper for main closure
-horn buttons (brown) at sleeve
-russet tread
Please:
Reproduce the overall pattern and keep fitting measurements, just add length (see below) and slightly move elements (see below)
-add 5cm length all around jacket at bottom
-don’t lower pocket
-lower yoke at back 5cm
-lower half belt and side straps accordingly
-slightly move/center pocket on D pocket (see picture)
-respect seams distance (3/4 mm)
-reproduce slight curves around nake collar.
-reproduce slight curves of sleeve
Shawn and his team started to work on the pattern and sent me pictures about a week later. They didn’t tear the original for that.
I salute the very good communication with 5 stars, sending pictures and reassuring me with any question I had.
Here’s the steps on the making.
Then finally another week or so, later, the jacket was almost done!
I received pictures of the measurements for validation
Its a beautiful and rare « aviator’s » type, alike those made by Ralph Pugh, or Block Bilt... Made of a nice sheepskin (not 100% sure) in an overall god condition for it’s age but a short and also fragile.
I took the decision of having it reproduced by 5 Stars, after unsuccessfully offering it to remake by Norshor Leather or Field Leathers.
Shawn/Ali accepted right away and I sent the jacket to Pakistan, where it arrived safely.
I had prepared an illustrated note to explain the tweaks I expected on the remake, as well as the specifications on leather, lining, hardware…
Required Specs:
*30’s Sport Jacket repro*
-seal brown HH 1,2mm
-green/gold satin lining for body
-black satin lining for sleeve
-n°3 repro talon zipper for chest pockets
-n°5 repro talon zipper for main closure
-horn buttons (brown) at sleeve
-russet tread
Please:
Reproduce the overall pattern and keep fitting measurements, just add length (see below) and slightly move elements (see below)
-add 5cm length all around jacket at bottom
-don’t lower pocket
-lower yoke at back 5cm
-lower half belt and side straps accordingly
-slightly move/center pocket on D pocket (see picture)
-respect seams distance (3/4 mm)
-reproduce slight curves around nake collar.
-reproduce slight curves of sleeve
Shawn and his team started to work on the pattern and sent me pictures about a week later. They didn’t tear the original for that.
I salute the very good communication with 5 stars, sending pictures and reassuring me with any question I had.
Here’s the steps on the making.
Then finally another week or so, later, the jacket was almost done!
I received pictures of the measurements for validation