Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Five Star Leather Jackets

CRP

New in Town
Messages
38
I thought I would update everyone on Cafe Racer I ended up getting from Fivestar. Black premium goat with modification to Seb's base J100 design (changed pockets mainly and adjusted size). No smell except the sweet smell of leather. I went with Shawn's recommendation for a 6 inch spread between body measurements and jacket measurements. It worked for the chest, but was too loose in the waist. I had the jacket tailored locally to take in the waist by 2 inches and hem by 1 inch. Shawn was willing to make the adjustments, but sending it back seemed like too much work when I could get it done locally. Pics are of the jacket after tailoring. Its starting to mold to my body and with a few more weeks should be even more comfortable and look even better.
Fivestar CR Tailor Front.JPG Fivestar CR Tailored Back.JPG
 

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
There seems to be a lot of surplus leather in the back - odd as the front seems trim. Did you want the sleeves that long? My other tweak to this pattern would be to use a single layer of leather under the sleeve zip - like most cafe racers. Shawn seems to use a double layer which makes the sleeve bunch out a bit at the wrist and harder to do up. How's yours?
 

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
Looks ok at the front but there is something not quite right about the pattern at the back. These jackets need to be V shaped - as I said on your other post there is a fair bit of surplus leather at the back. It's not fatal but it is a flaw.
 
Messages
17,496
Location
Chicago
I think it looks great! I like the black goat too. I think the black and seal are the best options for goat from 5 Star.
 

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
My own jacket, which I gave away, was this one - straight out of the bag here. I don't remember how the back fit and didn't take photos. I seem to remember more of a tailored V shape but maybe I'm wrong. Having a look at some Buco patterns just now, they seem to vary - or maybe it's the photos. This was one very thick.
20190716_172009.jpg
 
Messages
17,496
Location
Chicago
My own jacket, which I gave away, was this one - straight out of the bag here. I don't remember how the back fit and didn't take photos. I seem to remember more of a tailored V shape but maybe I'm wrong. Having a look at some Buco patterns just now, they seem to vary - or maybe it's the photos. This was one very thick.
View attachment 291035
Seb, why on Gods green earth did you give that one away!??
 

CRP

New in Town
Messages
38
There seems to be a lot of surplus leather in the back - odd as the front seems trim. Did you want the sleeves that long? My other tweak to this pattern would be to use a single layer of leather under the sleeve zip - like most cafe racers. Shawn seems to use a double layer which makes the sleeve bunch out a bit at the wrist and harder to do up. How's yours?
Actually, the sleeve length is perfect for when they are zipped up and my arms are up. When I unzip the sleeves, they do hang lower. My biggest issue is with raising or crossing my arms and the jacket getting too tight across my back. Not sure how to fix it, but I'm looking at bi-wing backs, underarm gussets/footballs, or having the sleeves sewn inline with the shoulder for better flexibility. Hopefully, one of these options will let me take out the tighten up the back. Learning a lot about jacket construction from this Fivestar experience. Now, I just have to come up with my next experiment.
 

CRP

New in Town
Messages
38
I think it looks great! I like the black goat too. I think the black and seal are the best options for goat from 5 Star.
I'm lovin this goat. I already have an old A2 from the early '90s in seal that is still going strong, so I had to get a black racer. Next is a lighter brown trucker or something similar to one of your sickkkk half belts. Keep up the good work - every one of your designs is an inspiration man!
 

CRP

New in Town
Messages
38
Looks ok at the front but there is something not quite right about the pattern at the back. These jackets need to be V shaped - as I said on your other post there is a fair bit of surplus leather at the back. It's not fatal but it is a flaw.
Agreed - not sure how to remove it without making the shoulders too tight. Looking into gussets, bi-swing backs, and different shoulder structures to solve it on my next one. The leather is thick but elastic, so I am hoping it will mold better over time.
 
Last edited:

Carlos840

I'll Lock Up
Messages
4,944
Location
London
Actually, the sleeve length is perfect for when they are zipped up and my arms are up. When I unzip the sleeves, they do hang lower. My biggest issue is with raising or crossing my arms and the jacket getting too tight across my back. Not sure how to fix it, but I'm looking at bi-wing backs, underarm gussets/footballs, or having the sleeves sewn inline with the shoulder for better flexibility. Hopefully, one of these options will let me take out the tighten up the back. Learning a lot about jacket construction from this Fivestar experience. Now, I just have to come up with my next experiment.

Why do you need the sleeves to be at perfect length with your arms up?
Maybe i'm weird but i would think the good old "arms by your side" pose is more common no?
 

navetsea

I'll Lock Up
Messages
6,851
Location
East Java
its the bane of 1 piece back I guess
Funny, I once bought these LVC 501 new from the Levi's webshop. Once delivered I noticed the left leg was twisted. Therefore I sent them back and ordered a new pair. Exact same thing: huge twist of the left leg (selvedge in front) View attachment 290365
When I contacted levis, they told me the leg twist was deliberate. Because they were produced to resemble 501 from the 40s, which often had twisted legs (because build quality was poor)
that is just right hand twill unsanforized jeans after pre soak, if you buy it raw you won't see it right away until you wash/ soak it 1st time. I totally hate leg twist, I tolerate it on my only unsanforized pants but never again, there is no denim slubby or hairy enough for me to give a blind eye to twisting leg.
 

torfjord

Call Me a Cab
Messages
2,779
Location
Sweden
I should wait until I have it in hand, but daaaaaamn I think this looks real promising. Shawn just sent me QC pictures of the trucker jacket they built for me. There´s an issue with the neck hole circumference that we need to iron out, but apart from that they hit all the requested measurements and this turned out even nicer than I hoped for.

edit: neck hole issue was just me misunderstanding one of the QC pictures. All is good, and they nailed every measurement I provided. Now I just pray and hope that I provided enough measurements to get a good fit.

DSC_7171 copy.jpg
DSC_7184 copy.jpg
 
Last edited:

Forum statistics

Threads
109,140
Messages
3,074,924
Members
54,121
Latest member
Yoshi_87
Top