Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Eastman Roadstar .

ProteinNerd

My Mail is Forwarded Here
Messages
3,902
Location
Sydney
My Roadstar is a size 42

I'm 1,80m 79kg

View attachment 518422

@Marc mndt, can I ask what size chest do you have?

I've gained about 8-10kg in the gym and had to sell my old Roadstar which was a size 40.

That was boarderline too snug on me at 73 to 75 ish kg and a 41 inch chest. I couldn't wear anything under it but a T-shirt.

I'm now about 83kg with a 43 inch chest. Rob at Eastman is recommending a 44 or possibly a 46!

Do you layer under your size 42 or just always wear a T-shirt?

I'm looking or something a little more flexible that I can wear a hoodie under if I need.
 

Marc mndt

I'll Lock Up
Messages
7,304
@Marc mndt, can I ask what size chest do you have?
43". 80kg.
Do you layer under your size 42 or just always wear a T-shirt?
I can wear it over a thin merino wool sweater but that's about it.
I'm looking or something a little more flexible that I can wear a hoodie under if I need.
The 42 won't accommodate a hoodie. I can't tell for sure though because I don't own any hoodies lol. For that you'd probably need the size 44.

There's a 42 lised in the VLJ classifieds, you might want to check it out. Great price.

IMG_6942.jpeg
 

mumpy

Practically Family
Messages
507
@Marc mndt, can I ask what size chest do you have?

I've gained about 8-10kg in the gym and had to sell my old Roadstar which was a size 40.

That was boarderline too snug on me at 73 to 75 ish kg and a 41 inch chest. I couldn't wear anything under it but a T-shirt.

I'm now about 83kg with a 43 inch chest. Rob at Eastman is recommending a 44 or possibly a 46!

Do you layer under your size 42 or just always wear a T-shirt?

I'm looking or something a little more flexible that I can wear a hoodie under if I need.
I have the same jacket in size 40 (40 inch chest) and I can only layer with very thin sweater and even then it feels a bit like a sausage fit unless I keep the jacket unzipped (although the problem seems to be the way it tapers, the chest is probably still fine). I think you will need at least a 44 for heavier layering.
 

ProteinNerd

My Mail is Forwarded Here
Messages
3,902
Location
Sydney
@Marc mndt thanks for the info and the heads up on the one on the VLJ forum, it’s a great price but I’m definitely after one in Walnut and I’m thinking the 44 might be a better bet for me now. I’ve got an ELMC Windward in Black and that scratches my itch for a black cross zip jacket

@mumpy I was in the same boat. Had a size 40 with a 41 inch chest that I ended up selling through here a few months ago. It was ok through the waist but just to tight through the chest and shoulders for me. It was a hard decision but I just never wore it.

Interestingly ELMC are out of Walnut leather atm. They are expecting more in April so I have a little time to think about it.
 

mumpy

Practically Family
Messages
507
I hope you find a good deal on it @ProteinNerd. I don't have to tell you this, you already had the jacket but the ELMC Roadstar is one of my favourite jackets for sure. Very comfortable, great fit, amazing leather etc.
 

ProteinNerd

My Mail is Forwarded Here
Messages
3,902
Location
Sydney
I hope you find a good deal on it @ProteinNerd. I don't have to tell you this, you already had the jacket but the ELMC Roadstar is one of my favourite jackets for sure. Very comfortable, great fit, amazing leather etc.
Thanks @mumpy but I expect I’ll have to go brand new unfortunately.

These things are just too rare in the aftermarket to allow the option of the size and colour I’m after.

I guess the same situation that makes me need to buy a bigger size in this is also making me sell a few other jackets so I can put those funds towards the new one. I’ll probably put my size 42 ELMC J-100 and Flat Head cafe racer up for sale.
 

mumpy

Practically Family
Messages
507
Thanks @mumpy but I expect I’ll have to go brand new unfortunately.

These things are just too rare in the aftermarket to allow the option of the size and colour I’m after.

I guess the same situation that makes me need to buy a bigger size in this is also making me sell a few other jackets so I can put those funds towards the new one. I’ll probably put my size 42 ELMC J-100 and Flat Head cafe racer up for sale.
I hear you, I actually had to buy the jacket new myself! It was out of stock on the website on my size but they did an amazing job and sourced the leather and made it within a few weeks. Great customer service too!
 

ProteinNerd

My Mail is Forwarded Here
Messages
3,902
Location
Sydney
I hear you, I actually had to buy the jacket new myself! It was out of stock on the website on my size but they did an amazing job and sourced the leather and made it within a few weeks. Great customer service too!
They must run with very low inventory (or selling a lot of jackets?). They were out of the black when I ordered a Windward about 12 months ago, it was about a 6 week turnaround. Likewise they are out of the Walnut currently, it won’t be back in till early - mid April before they can start making one for me.
 

Marc mndt

I'll Lock Up
Messages
7,304
How does the jacket handle rain? Any first-hand experience?
It pretty much soaks up water like a sponge. These vegetable tanned leathers with no topcoat aren't water resistant or water proof. If that's what you're looking for then you should focus on chrome or combination tanned leathers.
 

mumpy

Practically Family
Messages
507
Thank you. So best not to wear it in the rain. Is it detrimental, once it gets wet?
Rain, beer, it can take it all! (I've spilled 2 pints on my jacket and it is the only jacket I've spilled beer on lol)
 

Madhouse27

One of the Regulars
Messages
207
Resurrecting this thread to see if any of our Roadstar fans ever ordered the matching belt for the jacket and if so would it be possible to post a picture?

I just picked up a black one in size 44 on EBay in fantastic condition! If it was from one of you guys, thanks for the great job on the packaging! This is a great jacket. Certainly lighter weight than my Schott 613sh and has a more tapered cut. If I overdo it during the holidays, I might have to look for a size 46.
 

Marc mndt

I'll Lock Up
Messages
7,304
Resurrecting this thread to see if any of our Roadstar fans ever ordered the matching belt for the jacket and if so would it be possible to post a picture?

I just picked up a black one in size 44 on EBay in fantastic condition! If it was from one of you guys, thanks for the great job on the packaging! This is a great jacket. Certainly lighter weight than my Schott 613sh and has a more tapered cut. If I overdo it during the holidays, I might have to look for a size 46.
Just get a Jay-Pee for a fraction of the cost. $14, looks just as good.

https://www.ebay.com/itm/1456707281...w9G3PEsR_G&var=&widget_ver=artemis&media=COPY
 

attack_decay

One of the Regulars
Messages
110
It's too bad the ELMC belt does have the loops on the back for it to secure to the belt loops on the back of the jacket.
Screenshot_20241103-214126.png For the price they're asking, it should be more than just a... belt. I've never felt the urge to get a belt for this jacket but @Marc mndt do you have any recommendations on how to get the correct size belt for your jacket?
 

Marc mndt

I'll Lock Up
Messages
7,304
do you have any recommendations on how to get the correct size belt for your jacket?
Put the jacket on, take a tape measure and run it through the belt loops. If the tape measure reads 42" you need a size 42 belt :).

When the belt was still new and stiff it looked and felt a bit weird on the jacket when unfastened, it tended to move around because it doesn't have the loops to secure it in place. But this gets better when the belt is worn in. So maybe it's best to get a belt that's already worn in.

A28CC53B-67C8-4F29-AEC5-CCDE7725AE8A.jpeg
26737390-C6F5-4C38-A470-B9A1BD022DB6.jpeg
 

attack_decay

One of the Regulars
Messages
110
Put the jacket on, take a tape measure and run it through the belt loops. If the tape measure reads 42" you need a size 42 belt :).

When the belt was still new and stiff it looked and felt a bit weird on the jacket when unfastened, it tended to move around because it doesn't have the loops to secure it in place. But this gets better when the belt is worn in. So maybe it's best to get a belt that's already worn in.

View attachment 652216 View attachment 652217
Thanks! That belt really does look quite nice with the jacket. Looks much more appropriate than the ELMC brand rectangular buckle.
 

Forum statistics

Threads
109,095
Messages
3,074,031
Members
54,091
Latest member
toptvsspala
Top