Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Aero Premiere Half Belt fit opinions and fit pics.

Messages
15,563
Location
East Central Indiana
Strange, When I got their fit jacket..I tried it on then sent them a pic of how it fit me. They recommended that I take an inch off the sleeves since the model that I was ordering had wider shoulders. I sent the fit jacket back and when I received my jacket it fit perfectly. If you did this, I don't see how you could go wrong.
 

Colin G

One Too Many
Messages
1,202
Location
Canada
Strange, When I got their fit jacket..I tried it on then sent them a pic of how it fit me. They recommended that I take an inch off the sleeves since the model that I was ordering had wider shoulders. I sent the fit jacket back and when I received my jacket it fit perfectly. If you did this, I don't see how you could go wrong.

I don't know. I had nothing to do with how the test jacket I was sent, translates over to a Premiere fit.

Just like you, I sent in fit pics.

I was really hoping to open the box and have the jacket fit like a dream.
I am quite sure the vendor will help me out as they seem to be good people.
 
Last edited:

Superfluous

My Mail is Forwarded Here
Messages
3,995
Location
Missing in action
Christ... You sure they haven't sent you a jacket intended for someone else!? This can't be right!

No, it's definitely not your imagination. The original was a size too large! That thing they've sent you is like 3 sizes off, not just one. You look like a small kid wearing his dads leather jacket. It's ridiculous. Send it back asap!
Yeah, this ^.

^ This, +1.

Hope it all gets worked out to your satisfaction Colin.
 

Radz108

One of the Regulars
Messages
193
Location
Calgary, Alberta
Could they have made you a regular 30s Halfbelt instead of the premier version? The reason I mentioned this is because the collar shape does not look like the collars they put on the Premier jackets. It looks like a regular 30s Halfbelt collar. Also did you check the measurements of this jacket with the order document that the vendor gave you a copy of before submitting the order to Aero? It could help clarify where the miscommunication occurred. I also looked up the fit jacket measurements from the vendor site for comparison as well and posted it below. Hopefully things will work out in a timely manner for you

22A941CC-E2FF-4AFD-B562-73912A3B4A1E.jpeg
 

Colin G

One Too Many
Messages
1,202
Location
Canada
Could they have made you a regular 30s Halfbelt instead of the premier version? The reason I mentioned this is because the collar shape does not look like the collars they put on the Premier jackets. It looks like a regular 30s Halfbelt collar. Also did you check the measurements of this jacket with the order document that the vendor gave you a copy of before submitting the order to Aero? It could help clarify where the miscommunication occurred. I also looked up the fit jacket measurements from the vendor site for comparison as well and posted it below. Hopefully things will work out in a timely manner for you

View attachment 154063

Collar was modified.

As I mentioned earlier, this thread is just for fit picture opinions. I am not trying to solve a mystery of what happened or create any negativity about the vendor. Fit issues can happen.
 
Last edited:

ProteinNerd

My Mail is Forwarded Here
Messages
3,902
Location
Sydney
I feel for you man, clearly the fit is way off but I'm sure the vendor will sort it out for you.

That leather though is amazing...
 

Radz108

One of the Regulars
Messages
193
Location
Calgary, Alberta
How is the fit in the shoulders, arms (other than length) and chest? I own a Premier Halfbelt and I feel it fits trim in the shoulders, armholes and chest. However the waist and hem area are quite straight and loose. Despite the Premier range being a trimmer cut, it is still a straight cut and may not fit a “V” shaped body type exactly. If the jacket fits well in the shoulders, arms and chest but too loose in the waist and hem then it’s a problem of the pattern not fitting your body type. If this is the case then going down a size may not work since the shoulders and chest will be too snug. I had to cinch up the side straps quite a bit to get a more closer fit in the waist and hem. Have you tried tightening up the side straps and seeing if the fit is better?
I was told the STF bootlegger and hooch hauler are more V tapered than the Halfbelt. If the shoulders, chest and arms are too loose then the entire jacket is too big and you should have sized down.

For comparison I’m adding pics of the fit of my size 40 Premier half belt. You can see that the shoulder, chest and arms fit well but the waist and hem are quite loose and I have a lot of flaring at the hem like your fit pics.

738A7C49-AED1-463E-AD0F-534349A79620.jpeg
0C6CFE68-C21F-47EC-802D-412F2A372A98.jpeg
AF2CF896-9E22-4391-B3AE-B971378380CB.jpeg
 
Messages
17,512
Location
Chicago
Interesting info @Radz108 . I'm surprised to hear that the premier range doesn't slim the torso in the same way the shoulders and upper arms are slimmed. I suppose an answer could then be to drop size the waist from the chest to hem. I did that with great success with my 50's HB. I would've assumed the premier pattern had this built in.
 

AlexB

A-List Customer
Messages
306
Location
Berlin
How is the fit in the shoulders, arms (other than length) and chest? I own a Premier Halfbelt and I feel it fits trim in the shoulders, armholes and chest. However the waist and hem area are quite straight and loose. Despite the Premier range being a trimmer cut, it is still a straight cut and may not fit a “V” shaped body type exactly. If the jacket fits well in the shoulders, arms and chest but too loose in the waist and hem then it’s a problem of the pattern not fitting your body type. If this is the case then going down a size may not work since the shoulders and chest will be too snug. I had to cinch up the side straps quite a bit to get a more closer fit in the waist and hem. Have you tried tightening up the side straps and seeing if the fit is better?
I was told the STF bootlegger and hooch hauler are more V tapered than the Halfbelt. If the shoulders, chest and arms are too loose then the entire jacket is too big and you should have sized down.

For comparison I’m adding pics of the fit of my size 40 Premier half belt. You can see that the shoulder, chest and arms fit well but the waist and hem are quite loose and I have a lot of flaring at the hem like your fit pics.

View attachment 154068 View attachment 154069 View attachment 154070

In my new Ridley I could also pull away the jacket at l least 3 inches in the hip area (see picture). Of course I could use the cinches to make it more tapered but in some styles I think, especially with a thicker hose, it looks quite nice if the jacket is not too tight.
However, I agree that the fit of the jacket shown above looks off.
7604b6585bbcf66d8febb4ec3f777f17.jpg

For example the jacket in this picture (I don’t know who it is) looks great even if not super trim!
5e8bd699b7010c8e59579d92cc5541dd.jpg



Gesendet von iPhone mit Tapatalk
 

Radz108

One of the Regulars
Messages
193
Location
Calgary, Alberta
Interesting info @Radz108 . I'm surprised to hear that the premier range doesn't slim the torso in the same way the shoulders and upper arms are slimmed. I suppose an answer could then be to drop size the waist from the chest to hem. I did that with great success with my 50's HB. I would've assumed the premier pattern had this built in.
Thanks Ton,
Just to show hard numbers,
My previous post in this thread showed the measurements of the OP’s fit jacket size 40 30s Halfbelt. The shoulders are 18.5, pnp 22.75 and hem of 20.5. My size 40 Premier Halfbelt shoulders are 17.5 pnp 21.5 and a hem of 20.5. It’s a much straighter cut for the premier range. Carrie even mentioned that the Premier highwayman is still quite a straight cut despite being slimmer than the regular highwayman. The bootleggers, hooch haulers and ridleys are a much better fit for V shaped body types. For example, a size 40 hooch hauler is 18 in the shoulders, pnp 22 and a 19.5 hem.
 

Carlos840

I'll Lock Up
Messages
4,944
Location
London
Thanks Ton,
Just to show hard numbers,
My previous post in this thread showed the measurements of the OP’s fit jacket size 40 30s Halfbelt. The shoulders are 18.5, pnp 22.75 and hem of 20.5. My size 40 Premier Halfbelt shoulders are 17.5 pnp 21.5 and a hem of 20.5. It’s a much straighter cut for the premier range. Carrie even mentioned that the Premier highwayman is still quite a straight cut despite being slimmer than the regular highwayman. The bootleggers, hooch haulers and ridleys are a much better fit for V shaped body types. For example, a size 40 hooch hauler is 18 in the shoulders, pnp 22 and a 19.5 hem.

Both my size 40 bootleggers have 19.5 Shoulders, 24.5 p2p and 20" bottom hem...

(my bad, i just noticed you wrote hooch hauler...)
 
Last edited:

jacketjunkie

Call Me a Cab
Messages
2,323
Location
Germany
If this thread teaches me anything, then it is that I dislike the Premier Halfbelt pattern.. I would never get that. The 1930s HB pattern is just SO MUCH nicer imo. Broader shoulders and a decent taper through the body.
 
Last edited:

navetsea

I'll Lock Up
Messages
6,875
Location
East Java
neck opening though, it fits narrow from the pictures, can they custom size that part, otherwise the jacket can't be zipped totally on smaller size if the neck is hard sized following the pattern without option to custom.
 

Mich486

One Too Many
Messages
1,690
The main problem with Aero is that they don’t make public the measurements of their standard sizes. I tried to ask them when buying my grizzly recently in order to decide what size to purchase but they said they don’t have that info. So there are jackets labelled in the same way with pretty different measurements, I think one really needs to go jacket by jacket, no two are the same.


Sent from my iPhone using Tapatalk
 

Dav

One Too Many
Messages
1,706
Location
Somerset, England
I noticed that recently, there's a size 40 Highwayman in the blue label section with a larger chest than my 42, most annoying.
 
Messages
17,512
Location
Chicago
A good rule of thumb with the standard half belt line seems to be dropping a size from waist to chest. That will help create a more v shaped torso. I didn't do this on my 30's HB and I had to cinch the belt all the way in. I did do this with my 50's HB and I set the belt right about half way. I think if you have to pull both sides all the way in there's too material there and it's just too large in the gut.
30's midnight blue HB size 42"
image.jpeg

50's cordovan HB size 40" drop waist to 38"
image.jpeg
 

Forum statistics

Threads
109,325
Messages
3,078,934
Members
54,243
Latest member
seeldoger47
Top