Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

What Hat Are You Wearing Today ?

Daniele Tanto

I'll Lock Up
Messages
4,675
Location
Verona - Italia
Fedora worn on the morning dog walk was my early-1950s Mallory Coast To Coast; it came originally from Park Avenue Clothes in Dearborn, MI.

Hat chosen for the afternoon chores was my “western fedora”, the final incarnation of a beaten-up flea market score, rebuilt for me some 30+ years ago, by David Johnson (D Bar J).
Mark, an excellent match
 

RickP

My Mail is Forwarded Here
Messages
3,140
Headed out for a bit of Beard Maintenance today....makes the old Beaver Brand look neater
PXL_20261119_211619670.jpg
PXL_20261119_211338035.jpg

Little neater than this morning
PXL_20261119_134656240.jpg
 

VoodooSan

I'll Lock Up
Messages
4,804
Location
Boise, ID

aslyfox

New in Town
Messages
17
Let me introduce this cap, made in USA from 100% Irish lenin — "Rus".
Continuing my series of nicknames for my hats, let me introduce "Trots"—an early-1990s imported Russian full-fur mink ushanka built for serious winter weather with pull-down neck flap and earflaps (though those never get tied under the chin).

He replaced my original Soviet rabbit-fur ushanka that I picked up in Moscow back in January 1978—after that first one eventually shrank and got handed down to my son.

Following "Rus" (my Irish linen / Lenin cap), "Trots" rounds out the historical pairing—though unlike his namesake, he stays safely away from ice axes!
 

Attachments

  • 20261118_102410.jpg
    20261118_102410.jpg
    700.8 KB · Views: 6
  • 20261118_102643.jpg
    20261118_102643.jpg
    889.8 KB · Views: 8
  • 20261118_102704.jpg
    20261118_102704.jpg
    1.1 MB · Views: 7
  • 20261118_102528.jpg
    20261118_102528.jpg
    717.6 KB · Views: 7
Messages
13,722
I posted this in a Facebook group I'm a part of so if you read this already there, I apologize
View attachment 825669
Waiting while my better half undergoes a unmentionable routine procedure we all undergo as we leave middle age. I'm wearing a one of a kind Bowler Hat.

This hat was originally a standard hard sided bowler made by Arthur's. Arthur’s (founded by Arthur Feilchenfeld in Chicago) was a well-known local men's hatter operating in the Chicago Loop during the early-to-mid 20th century. This particular bowler can be dated to the late 1930's into the early 1940's.

Obviously it is not presented in It's original glory. It was rescued for 10 bucks on Vinted, and had been used and abused including cracked holes in the brim under the D'Orsay curl (at the break point of the curve that forms when stretched front to back after being put on a head too long), as well as having been crushed in in attempt to force a hard sided bowler into a pinch front bashed looking fedora and who knows how many other shapes. The original sweatband completely detached and the reed and bias tape completely disintegrated. I had lofty hopes of magically restoring to it's former glory and soon discovered my confidence was not placed appropriately. It's probable that someone else with more experience and skill might have been able to bring it back to normal life, but after countless hours and trying everything I'd learned about felt care and a number of things I'd never heard of (out of desperation) I was left with a bowler completely repaired (in terms of wearability) save that the crown was completely covered in 'shellac-only' smooth spots.

So this is what I decided to do, as I was left with a hat that fit, that I'd poured my heart into but one that I would never wear because of the damage I could not overcome. So, even though I have considered this a failure with a lot of learning, I still wanted to do something to make it wearable.

As hinted at above, I repaired the sweatband with completely new reed/tape made from some PU leather bias tape and clear invisible picture hanging wire (just a little thicker than modern plastic/vinyl reeds), reshaped and smoothed the crown as much as possible and then with a hint of inspiration from "Maker's Mark" type waxed hats, I decided to "Dip" the crown in Plasti-Dip. It didn't turn out as perfect as I'd hoped, but after returning the original grosgrain ribbon and bow to it's proper place I have something I'm actually proud to wear.

If you have read this far, I applaud you and apologize for my wordy nature as I had not intended to be so long winded today. I know some purists will be upset I didn't leave well enough alone or that maybe I should have passed it on to someone more capable, but I have no such person in my world to pass it to, and couldn't afford to try to send it to a pro.

Praying you are all blessed in some way the Thursday morning. ♥️
I applaud your perseverance on this project. In the end making it something you enjoy wearing is the point. well done.
 

Forum statistics

Threads
115,911
Messages
3,201,317
Members
59,466
Latest member
iatestqicom1541
Top