Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Wearing Vintage Shoes

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
Good explaination of your applying shoes rubber protection process. Thanks for sharing.

My cobbler prefers the Vibram brand sole protectors. According to him, this sole protector brand is more durable than others he has tried. The soles protectors from Vibram come in a enormous variety of colors. They even had a bright red that worked for my wifes Jimmy Choo heels! These are frequently worn heels that travel. The rubber bottoms make her heels very easy to use/wear. Variety of patterns exist in the Vibram offerings. I have had used a Vibram Tartar which is a plaid rubber pattern on a thin rubber protective sole put onto an older pair of Alden Walkers. Just cause it looked cool. It did not show unless the viewer could see the bottom, but I liked it.

I have asked in the past the process and here is a quick run-down:
(1) If client approves rough the surface with light sandpaper. If not approve, clean with alcohol and let dry thoroughly.
(2) Apply Barge (brand of rubber cement) cement both the shoes and protectors the trimmed soles.
(3) Bond the sole. I have seen the shoe in a clamp contraption and they have used rubber bands and string on my vtg.spade shoes. The leathers covered with flannel. Shoe trees if bands are used are needed. On custom shoes they have asked that I bring the custom shoe tress.
(4) Cure. I was told 5 hours for curing before triming.
(5) Trim sole using a beveled angle.

I see the Vibram sheets (6" x 18") for around $12.00 retail on the web. Vibram Repair Catalog here: https://us.vibram.com/on/demandware...pdfs/vibram-shoe-repair-catalog-june-2015.pdf

(It is important that the sole protector is thin so that it does not negatively affect the designed rocker of the shoe. )

Best, Eric -
You are very accurate in your post as a Topy may not bend or flex it it is thick and then pop off....I like the vibram sole protector as it seems to be more flexible when walking. Your step by step about covers it as well. As they say in Hollywood..."that's a wrap"!
 

-30-

A-List Customer
Messages
443
Location
TORONTO, CANADA
"Great selection, but FAR out of my price range."
MondoFW.

As with many items, there is a huge difference between "Price" and "Cost"; Price being measured in months, Cost measured in Years.
(Then, of course, there is always, Availability.)

Regards,
J T
 

Short Balding Guy

I'll Lock Up
Messages
9,871
Location
Minnesota, USA
My, oh my, does the Vintage Shoe Addict charge a lot. I have not made a transaction with him, but upon discovering his eBay store I've realized how much his immaculate pairs are. Great selection, but FAR out of my price range.

https://www.ebay.com/itm/Florsheim-...333164?hash=item2398cb912c:g:FsIAAOSw4HNacJ6Q

:(

Sir; Many of his posted offerings are GRAIL vintage shoes. A single pair of grail shoes is worthy! Wow, there are many drool worthy shoes in his Ebay shop.

If seriousely interested, contact him. Walk thru how payments could be arranged. I have known scenarios like this to work out for vintage items needing a caring home.

"Great selection, but FAR out of my price range."
MondoFW.

As with many items, there is a huge difference between "Price" and "Cost"; Price being measured in months, Cost measured in Years.
(Then, of course, there is always, Availability.)Regards,J T

+1 sir! Can you imagine if they were all your size?
 
Last edited:

MondoFW

Practically Family
Messages
852
If seriousely interested, contact him. Walk thru how payments could be arranged. I have known scenarios like this to work out for vintage items needing a caring home.
I am seriously interested, but not to the extent that I'll pay $300 for a pair. My ideal budget is $120 or less, and Sir Shoe Addict is definitely not THAT philanthropic
 

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
Good explaination of your applying shoes rubber protection process. Thanks for sharing.

My cobbler prefers the Vibram brand sole protectors. According to him, this sole protector brand is more durable than others he has tried. The soles protectors from Vibram come in a enormous variety of colors. They even had a bright red that worked for my wifes Jimmy Choo heels! These are frequently worn heels that travel. The rubber bottoms make her heels very easy to use/wear. Variety of patterns exist in the Vibram offerings. I have had used a Vibram Tartar which is a plaid rubber pattern on a thin rubber protective sole put onto an older pair of Alden Walkers. Just cause it looked cool. It did not show unless the viewer could see the bottom, but I liked it.

I have asked in the past the process and here is a quick run-down:
(1) If client approves rough the surface with light sandpaper. If not approve, clean with alcohol and let dry thoroughly.
(2) Apply Barge (brand of rubber cement) cement both the shoes and protectors the trimmed soles.
(3) Bond the sole. I have seen the shoe in a clamp contraption and they have used rubber bands and string on my vtg.spade shoes. The leathers covered with flannel. Shoe trees if bands are used are needed. On custom shoes they have asked that I bring the custom shoe tress.
(4) Cure. I was told 5 hours for curing before triming.
(5) Trim sole using a beveled angle.

I see the Vibram sheets (6" x 18") for around $12.00 retail on the web. Vibram Repair Catalog here: https://us.vibram.com/on/demandware...pdfs/vibram-shoe-repair-catalog-june-2015.pdf

(It is important that the sole protector is thin so that it does not negatively affect the designed rocker of the shoe. )

Best, Eric -

Vibram is a good product for sure. I just picked up a roll of sole sheeting (rubber) in Red as a color. It is 1.2mm thick, (or thin....haha) and the side that will be bonded is fairly textured has a bit of a "gritty" feel which that surface will help aide in it being more effective when adhesive is applied, it gives the glue more surface to hang onto And the side that will be "facing" the road, so to speak, has a pattern almost exactly like some Vibram.
 

MondoFW

Practically Family
Messages
852
Well, i finally acquired the dream shoe! On a sunny day as well. Purchased these 1940s Nunn-Bush spectators from Johnny J on here-- wonderful guy.

The spade sole, the supple leather and suede, the insole-- were all spectators made like this in the day? I always perceived Nunn-Bush as a cheap brand, even back in the day.

I'll definitely need something for the white suede. For now, I'm using my dad's florsheim trees. I sure hope these babies last for years to come.
d1aa9184-d73e-4aba-b3f9-af5133e96ebb.jpg
b7b85db9-747b-4552-b31d-866b706768b9.jpg
872f676a-1ff3-4542-822f-46d3eba706ba.jpg
b4c87e18-3fdc-4709-bf9b-d1f313fed437.jpg
b1f22041-8a4b-40d9-a179-4098272b201d.jpg
24871de1-ed27-4e5a-b6a6-eb8c3d70fd7e.jpg
 

Short Balding Guy

I'll Lock Up
Messages
9,871
Location
Minnesota, USA
Well, i finally acquired the dream shoe! On a sunny day as well. Purchased these 1940s Nunn-Bush spectators from Johnny J on here-- wonderful guy.

The spade sole, the supple leather and suede, the insole-- were all spectators made like this in the day? I always perceived Nunn-Bush as a cheap brand, even back in the day.

I'll definitely need something for the white suede. For now, I'm using my dad's florsheim trees. I sure hope these babies last for years to come. View attachment 110307 View attachment 110308 View attachment 110309 View attachment 110310 View attachment 110311 View attachment 110312

Johnny J is a stand up guy. Congrats on the shoes.

Lovely Nun-Bush shoes.

Wear them with pride sir. Eric-
 

Short Balding Guy

I'll Lock Up
Messages
9,871
Location
Minnesota, USA
Well, i finally acquired the dream shoe! On a sunny day as well. Purchased these 1940s Nunn-Bush spectators from Johnny J on here-- wonderful guy.

The spade sole, the supple leather and suede, the insole-- were all spectators made like this in the day? I always perceived Nunn-Bush as a cheap brand, even back in the day.

I'll definitely need something for the white suede. For now, I'm using my dad's florsheim trees. I sure hope these babies last for years to come.

MondoFW; I have a bit more time to respond this morning. Let me repeat glad you found these shoes. The lines are terrific.

As to the suede, the Saphir suede cleaner works like a charm. Combine the cleaner, with leather conditioner and a suede brush your white can be good for a long time. I look at the pics and offer caution to the original heels of the shoes. My experience is that they can crack and crumble at inconvenient times. Watch them check them as you certainly do not want to be out on the town with one heel. Sole protectors may give a bit more wear. In my neighborhood they are $30.00 of protection. Combined with a very thin leather insole the shoes are comfortable and give me piece of mind. Certainly this is my opinion. The shoes look good to go.

Carefully applied black creme and some clear mirror shine on the toes and you can be a "happening fellow" downtown.

Enjoy sir. I imagine the hunt for other like shoes only begins. Eric -
 

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
Well, i finally acquired the dream shoe! On a sunny day as well. Purchased these 1940s Nunn-Bush spectators from Johnny J on here-- wonderful guy.

The spade sole, the supple leather and suede, the insole-- were all spectators made like this in the day? I always perceived Nunn-Bush as a cheap brand, even back in the day.

I'll definitely need something for the white suede. For now, I'm using my dad's florsheim trees. I sure hope these babies last for years to come. View attachment 110307 View attachment 110308 View attachment 110309 View attachment 110310 View attachment 110311 View attachment 110312
Hello and yes you did get some super nice shoes.

Now for the white suede you use a suede brush to help clean that area and you use a "bunny bag" that is a white chalk substance you "dab" onto the suede to keep it white. NEVER use anything else on that suede unless you have something really bad on it that would require you to use a cleaner. If you desire to condition that area of the shoe from the inside of the shoe, which then would be that back side of the suede, you can apply Cadillac Boot and Shoe Care conditioner on the inside of your shoe, turn the shoe upside down and put the conditioner on your finger and rub that into the shoe. You can do it a few times leaving the conditioner to soak in. A "bunny bag" you will need to buy, I will find one online for you and post it here with a link....
 

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
Well, i finally acquired the dream shoe! On a sunny day as well. Purchased these 1940s Nunn-Bush spectators from Johnny J on here-- wonderful guy.

The spade sole, the supple leather and suede, the insole-- were all spectators made like this in the day? I always perceived Nunn-Bush as a cheap brand, even back in the day.

I'll definitely need something for the white suede. For now, I'm using my dad's florsheim trees. I sure hope these babies last for years to come. View attachment 110307 View attachment 110308 View attachment 110309 View attachment 110310 View attachment 110311 View attachment 110312

Here is a link to a "buck bag" same thing as a bunny bag....

https://www.shoeshineexpress.com/suedeandnubuck.asp
 

MondoFW

Practically Family
Messages
852
Bunny bag, suede brush, Cadillac conditioner...Passing these shoes down to my future kids may be harder than I thought! Thank you for the pointers.
 

LuvMyMan

I’ll Lock Up.
Messages
4,558
Location
Michigan
Bunny bag, suede brush, Cadillac conditioner...Passing these shoes down to my future kids may be harder than I thought! Thank you for the pointers.
Care for the shoes will help them have a longer life. I would also have something to protect your soles. I will explain why. The leather soles are indeed, sewn on with a welt. BUT you have a very thin layer of leather on the soles that cover up the entire bottom of the soles and hides the thread which is sewn through the soles. That thin layer will wear eventually and you then have a hole in that leather. To protect that from happening, you should have a sole protector like a Topy applied on those shoes. You can gain a lot of years wear on them by just doing that and having heel and and toe taps that are the nylon ones, put on.

If you do not have shoe trees to put in the shoes when you take them off.,..,get some and use them. Yes I know this is like a shopping list....but you have an investment paid, protect it for getting the best long term use of the shoes. You can see a lot of us here know some things about vintage shoe care so don't be shy to ask questions and get some answers.

The reason I would refrain from putting any conditioner directly on the outside of the white suede is, it can leave spots stains and leave the surface of the suede sort of mucky yucky sticky. Using conditioner on the inside of the shoe to condition will serve you better, and after allowing it to soak in you can rub it with a dry clean clothe and then wear the shoe the next day.

I normally soak the entire inside of vintage shoes pouring in the conditioner and rubbing it now and then to help it soak in to everything and do that a few times a day for a few days until the shoes stop soaking up the conditioner. Then I wait for one day after rubbing a clean clothe all around the inside of the shoe to get rid of excess conditioner.

But step one on all shoes for care...SPRAY disinfectant inside and clean the entire shoe with a damp clean clothe.
 

MondoFW

Practically Family
Messages
852
Hmm, should have done that before I wore them to school today (side note -- received many compliments). I have physical education tomorrow and generally reserve my nice clothes for days I don't have that, for convenience. Tomorrow, I'll clean the shoes and disinfect them.

I do have shoe trees in these for when they're sitting in my box. When I put them away for the day today, I examined them and thought, "These look nearly pristine, how could there be so many underlying issues I have to worry about??". I'll have to go to the store to get the products recommended in this thread. This endeavor sure does remind me of my father in his glory days. When he was around my age, living in Manhattan in the 50's, he bought a pair of 20's Florsheim spectators at a vintage shop near his apartment. Wore them when acting on stage, his magician performances, impressing the girls, you name it. According to grandma, he treated these kicks like they were his first-born, and he was always buying cleaning products to keep them pristine. Unfortunately, they're not with us anymore-- Pretty sure he sold them before I was conceived. Sad to think about.

Anyways, back to shoes. I'll think of some questions to ask and put them here. Thanks, all.
 

Forum statistics

Threads
109,298
Messages
3,078,198
Members
54,244
Latest member
seeldoger47
Top