Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

THE SUNBODY ASSOCIATION

Messages
18,222
Can anyone tell if this is a Sunbody Fine Palm Derby? The Sunbody appears to have more taper to it.

IMG_2300.JPG


IMG_2301.JPG


Sunbody Fine Palm
IMG_2302.JPG
 

tropicalbob

My Mail is Forwarded Here
Messages
3,954
Location
miami, fl
Anybody put a leather sweatband in a SunBody hat? I know it sort of defeats the soak them for shaping feature, but I just like leather better against my skin.


Sent from my iPhone using Tapatalk Pro
Not a bad idea. Once I've shaped a hat I seldom change it anyway. What always surprises me is when I see a $200+ straw with a cloth band. How much more could it cost for a strip of lamb? The Sunbody band I find less irritating than some of the others, but leather would be better. I wonder if Sunbody would provide one at an extra cost. Btw, I find the Peters Bros. leather bands on their hemps to be very nice and soft.
 
Messages
19,001
Location
Central California
Not a bad idea. Once I've shaped a hat I seldom change it anyway. What always surprises me is when I see a $200+ straw with a cloth band. How much more could it cost for a strip of lamb? The Sunbody band I find less irritating than some of the others, but leather would be better. I wonder if Sunbody would provide one at an extra cost. Btw, I find the Peters Bros. leather bands on their hemps to be very nice and soft.


I wish Peters Bros would fix their website. It went from being a mess to being nothing. I’ve exchanged a few emails, but they just seemed sketchy. I know they lost their most skilled guy a while back.
 

tsores

Familiar Face
Messages
87
Location
Chicagoland
I got my first SunBody hat this weekend ordered through the factory. It is the Open Road model with 2 1/2” brim. I immediately realized I did not like the cowboy-styled curled up brim so I reshaped it to a modest fedora up around the sides and back and down in front. The cattleman creased crown also touched the top of my head so I pushed it up just a bit.

Reshaping is quite easy by following the instructions on the website. Just got it wet under a faucet or use a spray bottle of tap water. Once it gets soaked in a couple minutes it is very pliable. Whatever shape you make it just holds there.

I got it one size up as the recommend. My only complaint is the sweatband. It looks like a cotton denim fabric. The problem for me is that it is so smooth it does not hang on to the back of my head (hair) and slides down on my head. I installed some of the supplied foam under the sweatband. It makes it ride better but is pretty tight on my head.

Grommets are installed for side vents and in the brim for a stampede string. Now I am ready for sun, rain, and wind. This looks like a durable hat that can take some abuse; a good go to hat.

As delivered:
UNADJUSTEDNONRAW_thumb_37b9_zpszubbq4yu.jpg


Adjusted:
UNADJUSTEDNONRAW_thumb_37bd_zpsrazfewxo.jpg
 
Messages
19,001
Location
Central California
I got my first SunBody hat this weekend ordered through the factory. It is the Open Road model with 2 1/2” brim. I immediately realized I did not like the cowboy-styled curled up brim so I reshaped it to a modest fedora up around the sides and back and down in front. The cattleman creased crown also touched the top of my head so I pushed it up just a bit.

Reshaping is quite easy by following the instructions on the website. Just got it wet under a faucet or use a spray bottle of tap water. Once it gets soaked in a couple minutes it is very pliable. Whatever shape you make it just holds there.

I got it one size up as the recommend. My only complaint is the sweatband. It looks like a cotton denim fabric. The problem for me is that it is so smooth it does not hang on to the back of my head (hair) and slides down on my head. I installed some of the supplied foam under the sweatband. It makes it ride better but is pretty tight on my head.

Grommets are installed for side vents and in the brim for a stampede string. Now I am ready for sun, rain, and wind. This looks like a durable hat that can take some abuse; a good go to hat.

As delivered:
UNADJUSTEDNONRAW_thumb_37b9_zpszubbq4yu.jpg


Adjusted:
UNADJUSTEDNONRAW_thumb_37bd_zpsrazfewxo.jpg

Looks good, and I like it better how you shaped it.


Sent from my iPhone using Tapatalk Pro
 
Messages
19,001
Location
Central California
The nicest SunBody extant? Our own @Mustang Mike’s Hats did all the heavy lifting. I got what I asked for: wide brim homburg shaped palm complete with a leather sweatband! The leather means you can’t dunk it in water, but it’s still easy to shape with a spray bottle. Mike did mention that he’s not looking to sew in a leather sweatband in another palm hat; apparently it’s not an easy thing to do. The leather is also much thinner than the cloth sweats and the hat needs some shims to fit me...only the third hat I’ve had that was bigger than ideal for me.

A huge thanks to Mike for making the hat for me!

29bcf388e69cfb0811ea70e27a5f1606.jpg


7a7081fb642c3d05dd3c928ede3dd790.jpg


6d0b6492c27d6d6154d460780ee6c8d8.jpg


c734ccd8e2cf86d9c644dc88483fe882.jpg


1bdb8a33432a80897160718ede5ac511.jpg


9c425e29d0138ba8beaef840f1973585.jpg


833c449b10f933040f0b8d9825292c4d.jpg


e766e9741c6a24168721365f16288e7f.jpg



Sent from my iPhone using Tapatalk Pro
 
Last edited:

Mustang Mike's Hats

A-List Customer
Messages
399
Location
Southern California
I did a palm straw fedora for a guy this week and used some vintage geometric patterned ribbon I located in a little shop up in Morro Bay, CA. I loved the pattern on it and since a few of my locals (who all know each other) have requested palm straw fedoras for the summer, I've been trying to come up with something a little bit unique for each of them.

fedora02.jpg
fedora01.jpg
 

Rmccamey

I'll Lock Up
Messages
5,876
Location
Central Texas
That one looks a lot better than most Sunbodies I've seen. Good job all around.

The nicest SunBody extant? Our own @Mustang Mike’s Hats did all the heavy lifting. I got what I asked for: wide brim homburg shaped palm complete with a leather sweatband! The leather means you can’t dunk it in water, but it’s still easy to shape with a spray bottle. Mike did mention that he’s not looking to sew in a leather sweatband in another palm hat; apparently it’s not an easy thing to do. The leather is also much thinner than the cloth sweats and the hat needs some shims to fit me...only the third hat I’ve had that was bigger than ideal for me.

A huge thanks to Mike for making the hat for me!

29bcf388e69cfb0811ea70e27a5f1606.jpg


7a7081fb642c3d05dd3c928ede3dd790.jpg


6d0b6492c27d6d6154d460780ee6c8d8.jpg


c734ccd8e2cf86d9c644dc88483fe882.jpg


1bdb8a33432a80897160718ede5ac511.jpg


9c425e29d0138ba8beaef840f1973585.jpg


833c449b10f933040f0b8d9825292c4d.jpg


e766e9741c6a24168721365f16288e7f.jpg



Sent from my iPhone using Tapatalk Pro
 

Forum statistics

Threads
109,323
Messages
3,078,916
Members
54,243
Latest member
seeldoger47
Top