Indeed! Thanks again, Steve.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
The Bowler or Derby Hat
- Thread starter carter
- Start date
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
The story you are about to read is true. The names have been changed to protect the innocent!
This was truly a team effort and I thank fellow Loungers Gary, Stefan, Daniele, and Peter
@The Shoe @steur @Daniele Tanto and @daizawaguy who helped me track down the origins of this Borsalino bowler. The markings were somewhat different than others I had seen. An initial search of the store name yielded results in Japan...rather unusual for Borsalino hats. The markings were very crisp, so I also wondered about this being a more modern hat. Through many exchanges back and forth, Stefan and Daniele were reasonably certain this was a pre-war hat (although exactly how it got from Italy to Japan may always be a mystery).
Peter seems to have summarized our discussions well as he said, "Daimaru is a Department Store in Tokyo. It is likely to be imported or perhaps manufactured with imported parts - likely pre war as post war, everything was damaged and had to be built up again, so your estimate of the date is likely to be correct. That liner, too, is very 30s. Wear in health."
No doubt, I am thrilled to have a Sold in Japan (maybe even a Made in Japan) bowler!
A note back to the seller (in New Jersey) and more clarity has emerged. It seems the hat was owned by an older relative (now many years deceased) of her husband. The relative was a political attache in Japan! The seller is reluctant to give out names, but I am hopeful I can get some additional information from her. I'll keep you posted. Yes, I am ecstatic about this one!
This bowler has typical dimensions. I will call it a mid-weight hat with a very smooth finish. The production tag is not easy to photograph but most of it can be read. There is a large block F on the lower portion and either a model or color listed as Gebel(?)
This was truly a team effort and I thank fellow Loungers Gary, Stefan, Daniele, and Peter
@The Shoe @steur @Daniele Tanto and @daizawaguy who helped me track down the origins of this Borsalino bowler. The markings were somewhat different than others I had seen. An initial search of the store name yielded results in Japan...rather unusual for Borsalino hats. The markings were very crisp, so I also wondered about this being a more modern hat. Through many exchanges back and forth, Stefan and Daniele were reasonably certain this was a pre-war hat (although exactly how it got from Italy to Japan may always be a mystery).
Peter seems to have summarized our discussions well as he said, "Daimaru is a Department Store in Tokyo. It is likely to be imported or perhaps manufactured with imported parts - likely pre war as post war, everything was damaged and had to be built up again, so your estimate of the date is likely to be correct. That liner, too, is very 30s. Wear in health."
No doubt, I am thrilled to have a Sold in Japan (maybe even a Made in Japan) bowler!
A note back to the seller (in New Jersey) and more clarity has emerged. It seems the hat was owned by an older relative (now many years deceased) of her husband. The relative was a political attache in Japan! The seller is reluctant to give out names, but I am hopeful I can get some additional information from her. I'll keep you posted. Yes, I am ecstatic about this one!
This bowler has typical dimensions. I will call it a mid-weight hat with a very smooth finish. The production tag is not easy to photograph but most of it can be read. There is a large block F on the lower portion and either a model or color listed as Gebel(?)
- Messages
- 11,714
Tremendous. Congratulations Randy.
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
Daniele Tanto
I'll Lock Up
- Messages
- 4,253
- Location
- Verona - Italia
European hat manufacturers had representatives in Japan since the beginning of the last century. Steve (mayserwegener) posted some time ago a great photo of Huckel hats, with their sales force, in Japan. Borsalino was present in the country of the Rising Sun since the beginning of the 1900s. These are public data of Borsalino's exports to various countries of the world
The bowler hat is a Borsalino product, probably, as already specified, prior to the Second World War. In this regard, its construction date is on the paper label with the size separated from the rest of the information, but, as already mentioned on other occasions, Borsalino used materials, formed but unfinished hats for a long period after the Second World War. One thing is certain Randy, knowing when the seller's ancestor was in Japan would give a lot
more sense to our speculations.
Also a photograph of the complete label would be of great help
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
I asked that question but to no avail. Being on the husband's side, she did not keep up with much family history and as the husband is also deceased, there is not a good resource to go back to. I still have a few breadcrumbs to follow, however.
I'll work to get a full pic of the label. Some material is stuck to the label and, quite frankly, I struggle to move pictures between my phone, tablet, and computer!
Go team Borsalino bowler!
Congrats on landing this one, Randy. Always nice to see another one saved and certainly one with such an odd combination of features. No less nice for it though: a winner all the way.
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
Thank you, Stefan.
Go team Borsalino bowler!
- Messages
- 17,518
- Location
- Maryland
Randy, Great find! Overall fantastic and being a WWII era or a bit earlier Japanese market Borsalino makes it really special. Congrats!
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
StoryPNW
One Too Many
- Messages
- 1,147
- Location
- Pacific Northwest
My first bowler, a Stetson Feather Weight. I don't know too much about it. It has a 2" brim and a 5 1/4" crown. I gently bent down the sweat band and found a tag.
The front of the brim seems to come up not down so I might seeing if a little steam will bring it into shape.
The front of the brim seems to come up not down so I might seeing if a little steam will bring it into shape.
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
Most excellent!
Stiff felts won't move much, but with some steam and TLC, you should be able to get the brim to straighten out.
Stiff felts won't move much, but with some steam and TLC, you should be able to get the brim to straighten out.
StoryPNW
One Too Many
- Messages
- 1,147
- Location
- Pacific Northwest
Thank you! I was able to straighten it a little.
- Messages
- 11,714
Looks like a good one.
good one
- Messages
- 14,829
Nice little Stetson …
Featured products
-
Alden 403 Moc Toe Boot - Brown Chromexcel - $680 The classic "Indy" style Alden Boot in the classic Horween brown Chromexcel. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
- Messages
- 14,829
Thanks Randy! I wish it fit me ... I really like the profile.
Rmccamey
I'll Lock Up
- Messages
- 5,872
- Location
- Central Texas
Bowler, sold by Chappellerie des 4-8 of Bordeaux, France. Size 56 with the brim at 4,5 cm and the crown at 12cm. Weighs 140 grams. No label under the sweatband.
I don't need another bowler, but when I looked at the crown patch I just had to get it; cartoony and cute.
I don't need another bowler, but when I looked at the crown patch I just had to get it; cartoony and cute.
