Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Show us your Guns!

plain old dave

A-List Customer
Messages
474
Location
East TN
1915 vintage 1894 model Norwegian Krag. I have looked for a Norwegian Krag for 27 years, and had almost despaired of finding one.

norgekrag2.jpg norgekrag3.jpg
 

Renault

One Too Many
Messages
1,688
Location
Wilbarger creek bottom
Sweet!!! I'm a sucker for Krags! There was a bubbatized Norweigan here at Cabelas a while back. Outside not so bad. Like an old 1930's job. But the bore looked like it had been rifled with a piece of barbed wire!!

Great catch!!!! Pickin's have been really slow around here.
 

plain old dave

A-List Customer
Messages
474
Location
East TN
I have seen my share of sewerpipe NKs. The math was very much like when the Finn Mosins came in back in the 80s-90s, only instead of dirt-cheap surplus ChiCom ammo vs. Norma that cost nearly what the gun did for Finn Mosins you had surplus Danish or Norwegian with ultra soft steel jackets or absurdly expensive Norma. So, just like you see a lot of Finns with rough bores (even knowing they came in the Country with decent or nice bores) you see a lot of NKs with awful bores, like the Norwegian Cavalry Carbine I passed on last year.
 

DeaconKC

One Too Many
Messages
1,736
Location
Heber Springs, AR
Not vintage, but a modern classic, Been wanting a Sig 239 for a long time and picked this up today. A SAS in .40, the wood grips have been replaced with some Crimson Trace ones.
 

Braz

Familiar Face
Messages
54
Location
Indiana
This is my only handgun. Colt Officers Model, 38spl. with Roper walnut grips. Dates from the 40s. It was my Grandfather's, then Dads now mine. It has seen little use and is in very nice condition.

PICT0157-L.jpg
 

ingineer

One Too Many
Messages
1,088
Location
Clifton NJ
Braz;
Very nice indeed, i believe that is the premium target model. Much harder to find than all the issue ones.
The Colt Python of its day
 
Last edited:

DeaconKC

One Too Many
Messages
1,736
Location
Heber Springs, AR
Braz, what a treasure you have there!
Report on the 239 SAS, got it to the range and it started having FTFs! A quick check showed NO lube at all, I had a small bottle of Militech with me, a few drops and it ran perfectly! Sounds like repeat DUHS on the previous owner and Yours Truly. A very accurate little beast, I will have to get used to the laser dot.
 

basbol13

A-List Customer
Messages
444
Location
Illinois
Braz, what a treasure you have there!
Report on the 239 SAS, got it to the range and it started having FTFs! A quick check showed NO lube at all, I had a small bottle of Militech with me, a few drops and it ran perfectly! Sounds like repeat DUHS on the previous owner and Yours Truly. A very accurate little beast, I will have to get used to the laser dot.

Sigs are great well made weapons and 239's are no exceptions. Glad you got to enjoy the "toy". I got a couple of Sig's myself a 238 and 938 ( I like 1911 style pistols) both are accurate and smooth I wouldn't trade or sell them for the world. If this is your first Sig after shooting it a while you'll feel the same way. Good Luck and Great shooting.
 

DeaconKC

One Too Many
Messages
1,736
Location
Heber Springs, AR
Sigs are great well made weapons and 239's are no exceptions. Glad you got to enjoy the "toy". I got a couple of Sig's myself a 238 and 938 ( I like 1911 style pistols) both are accurate and smooth I wouldn't trade or sell them for the world. If this is your first Sig after shooting it a while you'll feel the same way. Good Luck and Great shooting.
Bas, this is not my first Sig, I am admitted snob when it comes to their autos and S&W revolvers! That is why I feel so dumb at not checking the gun for proper lube, there are currently 3 Sigs here now, the 239, a 229R in .40 and a 220 in .45.
 

basbol13

A-List Customer
Messages
444
Location
Illinois
Bas, this is not my first Sig, I am admitted snob when it comes to their autos and S&W revolvers! That is why I feel so dumb at not checking the gun for proper lube, there are currently 3 Sigs here now, the 239, a 229R in .40 and a 220 in .45.

Glad you're a Sig guy. So you like S&W's also. I've got a low numbered Model 1917 nickle plated. I'll post it when I get a chance.

As for being remiss, don't worry about it everyone makes mistakes. Happy it wasn't a costly one like having the barrel blocked.
 

Forum statistics

Threads
109,327
Messages
3,078,972
Members
54,243
Latest member
seeldoger47
Top