Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

ideaguy

One Too Many
Messages
1,042
Location
Western Massachusetts
Brand X: What camera did you use to take the shots of your hats, and can you remember the lens, settings, etc.? the shot of the trio on the dresser is very good-nice&sharp, good detail, and very smooth transition to OOF.
All of your shots are good examples of how to shoot a hat ( I use a .12 ga.)
any information would help the Lounge, I'm sure-[huh]
 

B R A N D X®

Familiar Face
Messages
63
Location
SouthEast USA
toobacat said:
BRANDX, What are the crown heights on your hats? The Sterling Beaver looks a little higher. Is your dark moss VS hat color different than the felt samples? I have samples and my sample looks a little darker with a brown tint.

Thanks

toobacat, I'm not sure about the crown height, but the Sterling Beaver is slightly higher than the other two. I believe Art lists the Trackside at a 5 1/2" height.

On my calibrated monitor, the Trackside's felt color is exactly as it is in real life. On the swatch card that Art sent, the color appears quite a bit darker and more brown just as you say. So I'd say that if your swatch card is the same as mine and you are interested in a Moss Green VS you are safer to go by the photo's I posted than the felt sample.

Hope this helps.
 

B R A N D X®

Familiar Face
Messages
63
Location
SouthEast USA
ideaguy said:
Brand X: What camera did you use to take the shots of your hats, and can you remember the lens, settings, etc.? the shot of the trio on the dresser is very good-nice&sharp, good detail, and very smooth transition to OOF.
All of your shots are good examples of how to shoot a hat ( I use a .12 ga.)
any information would help the Lounge, I'm sure-[huh]

ideaguy, I use a Nikon D2Xs and this shot was taken with the NIkkor 28-70mm f/2.8 lens.

I shot aperture priority mode so I chose the f/stop and let the camera vary the shutter speed as the light changed due to clouds passing overhead outside my window. I also shot test frames for each light condition (filtered sunlight and filtered cloudy) with a graycard in the shot so that I could color correct in post for accurate color representation on a calibrated monitor.

I used a shallow DOF by shooting the lens wide open at 2.8 to help isolate the hats and to create a slightly more artistic look to the images rather than true Product-type shots.

The camera was mounted on a tripod due to long shutter speeds......

Here's is the relevant Exif data from one of the shots:


Camera-Specific Properties:

Equipment Make: NIKON CORPORATION
Camera Model: NIKON D2Xs
Camera Software: Adobe Photoshop CS3 Macintosh
Maximum Lens Aperture: f/2.8
Sensing Method: One-Chip Color Area
Focal Length (35mm Equiv): 48 mm

Image-Specific Properties:

Pixel Composition: RGB
Image Orientation: Top, Left-Hand
Horizontal Resolution: 72 dpi
Vertical Resolution: 72 dpi
Image Created: 2008:03:08 13:46:06
Exposure Time: 0.8 sec
F-Number: f/2.8
Exposure Program: Aperture Priority
ISO Speed Rating: 100
Exposure Bias: 0 EV
Metering Mode: Pattern
Light Source: Unknown
Flash: No Flash
Focal Length: 32.00 mm
Color Space Information: sRGB
Image Width: 800
Image Height: 531
Rendering: Normal
Exposure Mode: Auto
White Balance: Auto
Scene Capture Type: Standard
Gain Control: None
Contrast: Normal
Saturation: Normal
Sharpness: Soft
Subject Distance Range: Unknown

Glad you liked the photo's enough to ask! Let me know if I can help further.

Thanks!
 

shoelessjoe

Familiar Face
Messages
82
Location
The Colorado High Desert
Akubra Stylemaster in Acorn Fawn

307805140.jpg
 

Mustang

One of the Regulars
Messages
290
Location
Michigan
As others have said...

BRANDX, that is some beautiful photography! I can appreciate how much time, effort, patience, and knowledge is required to get those results. :eusa_clap.

The hat companies should be hiring you to photograph their hats...seriously!
 

J.T.Marcus

Call Me a Cab
Messages
2,354
Location
Mineola, Texas
Ande1964 said:
All in all, it seems to be a well-made hat, so how and when did it sell for $7.50, assuming that's what the name means? If you made me guess right now, I'd date this to about 1950.

That looks like a lot of hat for $7.50. I would guess a bit earlier, but that's just a guess. :)
 

HarpPlayerGene

I'll Lock Up
Messages
4,682
Location
North Central Florida
New Old Wormser Panama

Hello Loungers,
Here's a find I made right within walking distance of my house in Leesburg, Florida yesterday. An antique store on our Main Street had this and a nice Dobbs felt number in olive green. Anyway, I scored the straw for $24.00 and it seems to be of very good vintage quality. The photos don't show just how dirty it looks but I sort of like that "patina". I used some water and hair dryer to increase the pinch and dents and to get the front brim to stay down. This process cleaned off some surface dust too.
It's marked a 7-1/4 which is two sizes larger than my usual but it runs small after all these years and had some paper stuffing inside the sweat which makes it actually fit me! Yippee.
Very fine weave. Backwoven brim edge. Wind trolley with button stitched in place to bow (?). Dry rotted stitching on sweat band needs re-doing.
Check out the inside tag shots - particularly THE PRICE TAG.
Any info you Panama experts have or opinions about age and brand would be eagerly appreciated...
Gene
DSC_0026.jpg


DSC_0037.jpg


DSC_0036.jpg


DSC_0029.jpg


DSC_0042.jpg


DSC_0047.jpg


More pix here: http://s261.photobucket.com/albums/ii79/harpplayergene/WormserPanama/
 

HarpPlayerGene

I'll Lock Up
Messages
4,682
Location
North Central Florida
"The weather is here, wish you were beautiful"...

Hey Mustang,
Yeah, enjoying March in Florida. Especially since I'm originally from a lil' town called Detroit. Give me a frame of reference y'know?
All the best,
Gene
 

HarpPlayerGene

I'll Lock Up
Messages
4,682
Location
North Central Florida
"Fantastic"

Thanks Douglas! I just PMd HungaryTom to invite him to check it out and offer his opinion on age, etc. I'm really thinking this may be very old and while that isn't everything to me in a hat, it might be a cool plus on this one. Soon I have to zip out to band practice but will check back in later tonight.
All the best,
Gene
 

HungaryTom

One Too Many
Messages
1,204
Location
Hungary
HarpPlayerGene said:
Thanks Douglas! I just PMd HungaryTom to invite him to check it out and offer his opinion on age, etc. I'm really thinking this may be very old and while that isn't everything to me in a hat, it might be a cool plus on this one. Soon I have to zip out to band practice but will check back in later tonight.
All the best,
Gene

Gene,

You honor me, but I am by no means an expert in panama hats, just an aficionado who got the bug for Panamas a while ago then a couple of really great Montecristi fino from Bob, and his hats inspire me to fish for new information on panama hats. The web is a real ocean, it gets you sometimes good catch sometimes a bad catch and the hats reveal the info if you are really attracted to them.
I just own 2 modern Montecristi and 1 more is under way and a Cuenca. All are new production. Therefore I am not an expert in vintage panama hats not to mention the brands that are marketed in the US - I really live in Hungary.

If you look for true experts in matters of panama hats at the FL forum those guys are PanamaBob, (he is dealing with thousands of Montecristi and Cuenca), Vilhat (Fred Belinsky-also a wholesale trader of Panamas) or Art Fawcett (he blocks a lot of panama hats). There are also the collectors of vintage hats.

I would say that the hat is surely not from 1894:)
and even if it was not sold to you at its original 2,95- the eightfold price is still a fantastic steal.

It is not an extremely high weavecount hat (1600+) - but a very nice one w. even and straight rows, originally uniform color (try to count the weaves with the Montecristi Windows system - cut the 1x1 inch window on a paper hold it against the hat and see how many knots are there horizontally and vertically along the edges of the window then multiply).


It fits you well.
<a href="http://s261.photobucket.com/albums/ii79/harpplayergene/WormserPanama/?action=view&current=DSC_0056.jpg" target="_blank"><img src="http://i261.photobucket.com/albums/ii79/harpplayergene/WormserPanama/DSC_0056.jpg" border="0" alt="Photobucket"></a>
Best:

Tom
 

RBH

Bartender
WOW Gene!!! That is a great panama! I love the pinch you put in it also.
You just cant hardly find a hat with the abundent crown that your hat seems to have.
What is the brim width and crown height /
:eusa_clap Man you are really styling !!! :eusa_clap

<a href="http://s261.photobucket.com/albums/ii79/harpplayergene/WormserPanama/?action=view&current=DSC_0056.jpg" target="_blank"><img src="http://i261.photobucket.com/albums/ii79/harpplayergene/WormserPanama/DSC_0056.jpg" border="0" alt="Photobucket"></a>
 

Stoney

Practically Family
Messages
977
Location
Currently on the East Coast
Capelli Ravazzi Stingy Brim

I picked this one up a little over a week ago on e-bay. It was made in Italy, I'm guessing mid 50s to early 60s based on the liner and sweatband. It was full of dust and the fur was pretty matted down. I cleaned it up and flattened the 1 7/8 brim while adding a slight curl as viewed from the front. I added the turkey feathers and Hard Rock Atlanta pin. It turned out to be a pretty fun hat to wear
and looks lie a new one. I've never seen a hat this stingy before that had a wind trolley installed.

Capelli-Ravazzi.jpg
 

Forum statistics

Threads
109,140
Messages
3,074,927
Members
54,121
Latest member
Yoshi_87
Top