Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Messages
10,855
Location
vancouver, canada
This panama is sold to me as a Borsalino, but i am in doubt if this is a Borsalino. It is made in Italy, so it could be. It's a genuine montecristi made in ecuador. The condition was not that good, but after some steam the form came back. Except from a little damage in the top of the crown, the hat looks good again. Unfortunally the size 58 is more like a 57 so it doesn't fit me. Luckily my wife is a 57, so she is happy now :) I bought this hat for 12 euro including shipping costs, so only the leather sweatband is more worth then that ;-)
View attachment 603178 View attachment 603179 View attachment 603180 View attachment 603181 View attachment 603182 View attachment 603183 View attachment 603184 View attachment 603185 View attachment 603186 View attachment 603187
I glued a piece of grosgrain ribbon in a similar colour to the straw on the hat's inside to reinforce the area if the split. It hid it a bit but mostly did it to stop it from spreading.
 
Messages
10,855
Location
vancouver, canada
Tx, but in the netherlands we don't have a Michaels (i think) :)
I think any light spray glue would work. My concern with using too heavy/thick a glue might show onto the outside or leave a hardened spot. I sprayed the ribbon and then laid it in place inside the hat. I also fixed another Panama where the straw had split at the pinches with patches of leather. It worked too but the grosgrain ribbon is better as it is lighter in weight/mass.
 
Messages
11,380
Location
Alabama
I’m no hatter or carpenter but I have used this
1712178101372.jpeg

to work on this as well as a couple of Monticristi’s. If it’s a tight seam crack, a small amount worked into the crack and surrounding area will stabilize it. Dampening the area being worked on can help. The glue is water soluble but waterproof upon drying. I’ve never attached a stabilising patch but I’ve seen linen and silk used.
1712178502808.jpeg

1712178552004.jpeg

1712178634698.jpeg

1712178690354.jpeg

Esther Weiss spoke of using bookbinding glue.
 

Attachments

  • 1712178604105.jpeg
    1712178604105.jpeg
    1.2 MB · Views: 51
Last edited:

Daniele Tanto

I'll Lock Up
Messages
4,253
Location
Verona - Italia
"After all it's just a black Homburg"
Leon - Mossant 1.jpg
This is what I said to myself when I saw a couple of horrible photographs of the hat.
Leon - Mossant interno.jpg
Then I saw the inside and decided to buy it, despite the vagueness about its size.
Leon - Mossant 2.jpg
Mossant - Leon, considering that, Leon retailer located at 21, Rue Daunou - Paris always has a preponderant role in the brands of the hats sold by him.
This is a black firm felt Mossant, quite brimmed, for a homburg. Arrived in perfect shape after many years of being made.
Leon - Mossant 9.jpg
Perfect inside and out, except for a small amount of dust which is a must on black felts.
Leon - Mossant 5.jpg
These are the measurements: the crown at its maximum expansion is 13 centimeters, the ribbon is 5 centimeters and the perfectly curled wings are 6 centimeters.
Leon - Mossant etichetta.jpg
The size is 5 in the French scale, therefore a 57 cm. in Europe and a 7 1/8 in the US
All the lovers of elegant black homburgs can make an offer :)
 

wsmontana

Practically Family
Messages
522
Location
Montana
Has anyone heard of a Royal Stetson Casual? It features a felt band and over welt brim.

I picked this up from a local elderly lady who said her Dad owned it and that it has been stored in her closet in the Marathon box for 30+ years. It is very clean with no moth bites or other damage and the sweat is supple and fully intact.

IMG_9780.jpeg
IMG_9777.jpeg
IMG_9779.jpeg
IMG_9775.jpeg
IMG_9774.jpeg
IMG_9773.jpeg
IMG_9772.jpeg
IMG_9776.jpeg
 
Circa 1930 Stetson Select Quality. Newly arrived and the first layer of dust dry-brushed off. This doesn’t quite fit me, but the size skews the opposite way I’m used to. Especially for these older hats. A quick look behind the sweat does not show a size tag, but it measures out as a size 7-5/8.

After I condition the sweat I may try to find a lot number or other info behind there.

2-1/2” brim, 5-1/2” crown.

IMG_2254.jpeg


IMG_2255.jpeg


IMG_2256.jpeg


IMG_2257.jpeg


IMG_2258.jpeg


IMG_2259.jpeg


IMG_2260.jpeg


IMG_2261.jpeg


IMG_2262.jpeg


IMG_2263.jpeg
 

Steve1857

I'll Lock Up
Messages
8,867
Location
Denmark
Best new arrival of the week.
Borsalino export qualität (German market) in a pearl grey colour called Vaiato, which is one we have not seen before. Another hat in a camber style. Lovely hand to the felt. Not as old as I had expected, but what does it matter if it's this nice?

View attachment 605064 View attachment 605065 View attachment 605066 View attachment 605067 View attachment 605068 View attachment 605069 View attachment 605070 View attachment 605071 View attachment 605072 View attachment 605073
Two really nice Mossants, Stefan, and the Vaiato is such a stand out Borsalino. Love the colour.
 
Messages
11,714
Best new arrival of the week.
Borsalino export qualität (German market) in a pearl grey colour called Vaiato, which is one we have not seen before. Another hat in a camber style. Lovely hand to the felt. Not as old as I had expected, but what does it matter if it's this nice?

View attachment 605064 View attachment 605065 View attachment 605066 View attachment 605067 View attachment 605068 View attachment 605069 View attachment 605070 View attachment 605071 View attachment 605072 View attachment 605073

Two really nice Mossants, Stefan, and the Vaiato is such a stand out Borsalino. Love the colour.
A real beauty indeed.
 

Forum statistics

Threads
109,288
Messages
3,077,943
Members
54,238
Latest member
LeonardasDream
Top