P&C Top hat. That's not Habig, but the Dutch (originally from Germany) retailer Peek&Cloppenburg. Still located on Dam square in Amsterdam to this day. This one was made by Spoorenberg, who produced toppers under different brand names, mainly Burton and Ambassador. I bought this one because it's a size 60 and these things are rare in larger sizes. Brim at 6cm and 14cm high. Excellent condition except for some waviness on the sweatband. PM me if you're interested.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Post New Hats Here!
- Thread starter Rundquist
- Start date
I suspect it will be green hats all around today, but there are other (better
) ways to go to celebrate St Patrick's day. A hat in the colour of Guiness for example and a different nod to Ireland.
Dublin homburg hat in black. Size 56 with the brim at 6cm and the crown at 10,5cm at the center dent. Model is called Basel and the quality is called Poniko. I need another black homburg like I need a hole in my head, but I couldn't resist. The label is by W&G Schuchart, a wholeseller who likely sourced from Wegener. Sláinte!
) ways to go to celebrate St Patrick's day. A hat in the colour of Guiness for example and a different nod to Ireland.Dublin homburg hat in black. Size 56 with the brim at 6cm and the crown at 10,5cm at the center dent. Model is called Basel and the quality is called Poniko. I need another black homburg like I need a hole in my head, but I couldn't resist. The label is by W&G Schuchart, a wholeseller who likely sourced from Wegener. Sláinte!
Rmccamey
I'll Lock Up
- Messages
- 5,876
- Location
- Central Texas
If it were a size up, I'd have to try to talk you out of that one!
I suspect it will be green hats all around today, but there are other (better
Dublin homburg hat in black. Size 56 with the brim at 6cm and the crown at 10,5cm at the center dent. Model is called Basel and the quality is called Poniko. I need another black homburg like I need a hole in my head, but I couldn't resist. The label is by W&G Schuchart, a wholeseller who likely sourced from Wegener. Sláinte!
View attachment 499105 View attachment 499106 View attachment 499107 View attachment 499108 View attachment 499109 View attachment 499110 View attachment 499111 View attachment 499112 View attachment 499113 View attachment 499114
Thanks, Randy. It's a very nice hat, but it's up against some very tough competition in the black homburg department.
- Messages
- 19,001
- Location
- Central California
Gorgeous hat and fantastic condition. That’s going to make someone’s day!
Thanks, Brent. I hope it will, because that's why I bought it.
Mean Eyed Matt
One Too Many
- Messages
- 1,142
- Location
- Germany
I love colour combinations like that - what reminds me I need another one like that for myself...
Thanks, Matt. We all need another hat...
- Messages
- 14,841
An big old western from Montgomery Ward (late 1920s). The "Round Up" model. 7-1/2" crown, 5" brim. It doesn't fit me (like advertised), but does fit my wife. Although she is a bit intimidated by it.
A screen printed Pin-Up?
A screen printed Pin-Up?
I wouldn't have any use for it where I live, but it's everything a western hat should be and I still want one.
- Messages
- 14,841
A big newer western from Stetson. The "Tom Mix" model. 7" crown, 5" brim.
Compared to the MW "Round Up" above.
Compared to the MW "Round Up" above.
- Messages
- 14,841
Thanks Stefan! I still want one (that fit's me) as well. For now the modern Tom Mix will have to do.
Featured products
-
John Lofgren Monkey Boots Shinki Horsebuttt - $1,136 The classic monkey boot silhouette in an incredibly rich Shinki russet horse leather. -
Grant Stone Diesel Boot Dark Olive Chromexcel - $395 Goodyear welted, Horween Chromexcel, classic good looks. -
Schott 568 Vandals Jacket - $1,250 The classic Perfecto motorcycle jacket, in a very special limited-edition Schott double rider style.
- Messages
- 14,841
Thanks Steve. I've been easing her into taller crowns with the last few hats. I bet I can get her to wear it in Santa Fe next time we are there -- especially after she gets lots of complements on it.
- Messages
- 19,001
- Location
- Central California
Fantastic hat, Bob. It’s another that I intended to bid on and then forgot. I’m glad you ended up with it.
- Messages
- 14,841
Thanks Brent! Glad you forgot ... it kept the price below that of a new Camp Draft.
- Messages
- 14,841
Stylepark with the "Sanither" sweat band. Trademarked in 1935 and renewed in 1948. All the ads I've seen are from 1935 and "Sanither" doesn't seem to be mentioned in advertising after "Templeform" became the focus in 1937/38.
Thanks @DaveProc for the newspaper ad!
Thanks @DaveProc for the newspaper ad!
MikeinRome
One Too Many
- Messages
- 1,022
A Whippet-style fedora of unknown make, 2 3/4 inch brim, which I rescued a month or so ago on eBay for $80. It had no sweatband or liner, the ribbon was trying to come off, and it seemed someone had used it while painting- had paint droplets on it. Sent it to Randall Renshaw to rebuild. Can't believe it's the same hat. First photo is "before", others are "after". The liner is one that Randall had sitting around and isn't meant to imply the hat's maker.
Attachments
Last edited:
Nice save, Mike. Great work by Randall.
Daniele Tanto
I'll Lock Up
- Messages
- 4,255
- Location
- Verona - Italia
In recent arrivals, very few compared to other periods, I have focused on the last fires of Italian hat making before its almost total disappearance
Today we consider a Barbisio, certainly made by Cappellificio Cervo with a tacky pin to diminish its sharp line.
The hat has a medium textured brown felt and the ribbon is low and the proportions of the hat are "generous" for a product put on the market in fairly recent years.
Lined, it has a fabric sweatband and is very easy to wear, the size is 59 centimeters or 7 3/8 in US.
These are the measurements, the raw brims are 6 cm, the ribbon is 1.5 cm, unusual for a hat made in Italy, and the crown fully open is 13cm.
I found a source for these late hats from the Italian production, I hope it continues to generate interesting hats
Today we consider a Barbisio, certainly made by Cappellificio Cervo with a tacky pin to diminish its sharp line.
The hat has a medium textured brown felt and the ribbon is low and the proportions of the hat are "generous" for a product put on the market in fairly recent years.
Lined, it has a fabric sweatband and is very easy to wear, the size is 59 centimeters or 7 3/8 in US.
These are the measurements, the raw brims are 6 cm, the ribbon is 1.5 cm, unusual for a hat made in Italy, and the crown fully open is 13cm.
I found a source for these late hats from the Italian production, I hope it continues to generate interesting hats
