Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Period Accurate Dress Shirts

stag1500

New in Town
Messages
1
Location
California
How long should the points of a collar be for a period accurate dress shirt from the 1930s? Also, what kind of fabric did they use so that the shirts are translucent?
 

Marc Chevalier

Gone Home
Messages
18,192
Location
Los Feliz, Los Angeles, California
Depends on which years of that decade. In the early '30s, all kinds of collar shapes were manufactured --buttondown, rounded, moderate spread, windsor spread, and tab-- but the most popular were long collars (1.5" high at the back, 4" long down the front) that pointed sharply downward.


DSC09243.jpg





By the mid '30s, long collars were beginning to be a bit less long (about 3 1/4").


shrttie4.jpg






And by the late '30s, they'd come to strongly resemble the 'straight point' collars found on today's dress shirts.


20024.jpg






The more translucent fabrics used were lightweight poplins and silks. End-on-end broadcloth and madras were also quite popular, but not translucent.


.
 

Warbaby

One Too Many
Messages
1,549
Location
The Wilds of Vancouver Island
Marc Chevalier said:
Depends on which years of that decade. In the early '30s, all kinds of collar shapes were manufactured --buttondown, rounded, moderate spread, windsor spread, and tab-- but the most popular were long collars (1.5" high at the back, 4" long down the front) that pointed sharply downward.


DSC09243.jpg

Is anyone making collars like this today? I've always been partial to the high collars with rounded points, but I'd sure like to have a couple of the long, pointy ones as well.
 

mike

Call Me a Cab
Messages
2,000
Location
HOME - NYC
Warbaby said:
Is anyone making collars like this today? I've always been partial to the high collars with rounded points, but I'd sure like to have a couple of the long, pointy ones as well.

I agree, I wish the vintage shirt company made this style.
 

Guttersnipe

One Too Many
Messages
1,942
Location
San Francisco, CA
Acetate shirts, particularly in lighter colors, tend to have a translucent appearance. Dress shirts were sometimes made of acetate or acetate/rayon blends; I suspect these were cheap alternatives to silk. I've seen a few examples of these from the later 1930's before.
 

cm darcy

New in Town
Messages
2
Location
Sussex
Period Accurate Dress Shirts Reply to Thread

hello,
Many thanks for the kindly references to our shirts. I will definitely work on making separate spearpoint collars although possibly a less extreme version than the photo.
Does anyone have a preference for the washable variety or would you like me to persist with the traditional starched collars?
The washable are not as stiff but I appreciate that laundering is a problem especially outside Britain.
best wishes from Miss Darcy. Vintage Shirt Company. England
 

mike

Call Me a Cab
Messages
2,000
Location
HOME - NYC
Hello Darcy! Thanks so much for following my link! :)

I would vote for the washable version, but lets see what the consensus is.
 

Marc Chevalier

Gone Home
Messages
18,192
Location
Los Feliz, Los Angeles, California
Lone_Ranger said:
Out of curiosity, what year did the shirt, with permanent collar attached, first make it's appearance?


Depends on the type of shirt. Wool flannel "campaign/camping/outdoor work" shirts had attached modern-style collars as far back as the late 1800s. Attached collars first appeared on dress shirts soon after World War I ended.

.
 

Marc Chevalier

Gone Home
Messages
18,192
Location
Los Feliz, Los Angeles, California

Lamplight

One of the Regulars
Messages
210
Location
Bellingham, WA
Marc Chevalier said:
Aside from one or two (expensive) makers in Japan? Nope.

I believe our very own Matt Deckard offers a shirt with a fairly similar collar, and the off-the-rack version isn't terribly expensive. ;)

IMG_9495.jpg
 

Tomasso

Incurably Addicted
Messages
13,719
Location
USA
This could be accomplished by a myriad of shirtmakers for a C Note and up, depending on maker and fabric.

IMG_9495.jpg
 

Matt Deckard

Man of Action
Messages
10,045
Location
A devout capitalist in Los Angeles CA.
It's longer and pointier than what you find on the shelves nowadays.

I've got an even longer point variation as well with a more acute closure, also a long collar with rounded tips... though they are on clients at the moment and I need to take pics of the next time someone orders one with a long point collar like that.
 

Lamplight

One of the Regulars
Messages
210
Location
Bellingham, WA
Are these long, pointed collars more appropriate for using a collar bar? I've tried to use one with my generic modern shirt, and it just doesn't look quite right. It's not a spread collar, just a plain old standard modern collar.
 

Forum statistics

Threads
109,325
Messages
3,078,934
Members
54,243
Latest member
seeldoger47
Top