Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Let's See Your Electric Trains!

dhermann1

I'll Lock Up
Messages
9,154
Location
Da Bronx, NY, USA
Great trains!

Boy! Those are some nice pix! Now I'll have dig out old shots, figure out how to upload, etc., etc. BTW, check my new avatar with picture of your humble servant in his new Stetson!!! Feeling VERY COOL.
 

Zemke Fan

Call Me a Cab
Messages
2,690
Location
On Hiatus. Really. Or Not.
Very cool, DH1

And Mikey in Seattle. You sly dog you. Great thing you did for your mum!

Love these structures by Banta Modelworks:

6096-3.jpg
....
bmw-109a.jpg


6040A.jpg


4109A.jpg


And THESE by Berkshire Valley:

k801a.jpg


k802a.jpg


k820a.jpg
 

Brad Bowers

I'll Lock Up
Messages
4,187
Great to see so many model railroaders here.

I've been a railfan since before I was one year old, and have collected model trains about as long.

But one of my longtime dreams is finally about to come true! I grew up in Colorado, so I always wanted to model the narrow gauge, but could never afford the locomotives until this new burst of relatively inexpensive, ready-to-run equipment started coming out in HOn3.

I'm anxiously awaiting the release of this locomotive (with sound!), so I can finally build a 1930s layout. I'll have to fudge the time factor, though, so I can include all the 1950s D&RGW standard gauge equipment I've collected over the years.

Brad
 

Brad Bowers

I'll Lock Up
Messages
4,187
Zemke Fan,

MSRP is $419 with sound, $339 without.

There are a lot of places that are discounting these 20%, which makes them $335, and $271, quite a bargain compared to the price of brass models!

Brad
 

Michaelson

One Too Many
Messages
1,840
Location
Tennessee
Dalexs said:
About 7 years ago, my sons love for Thomas the Tank Engine, got me back into trains.
A friend of mine at work was really into it and I finally got serious.

Since moving back to the east coast 3 years ago, all of my HO stuff has been in a box.
But now, with a new house, AND my own office/playroom...
I'm ready to start ripping into walls to see where my trains can run thru!
I may be able to actually have a mainline go the entire circumference of the house in the attic/eaves.

Dalexs

Packed up 3 years? Try 15! That's how long all MY HO equipment has been boxed!:eusa_doh:

Regard! Michaelson
 

Dalexs

Practically Family
Messages
569
Location
Just 'nath of Baston
Michaelson said:
Packed up 3 years? Try 15! That's how long all MY HO equipment has been boxed!:eusa_doh:

Regard! Michaelson

Your kids have all moved out... you've been in your current house how long?

YOU have NO excuses! ;)
 

Michaelson

One Too Many
Messages
1,840
Location
Tennessee
Uh, Steve, when your kids are all grown and supposedly 'moved out', then come and tell me 'I have no excuses'.lol

Most all their JUNK is still here! They're gone, yes, but not all their STUFF!!!I can't even SEE my model railroad boxes for their storage! :rolleyes:

Regards! Michaelson
 

Maj.Nick Danger

I'll Lock Up
Messages
4,469
Location
Behind the 8 ball,..
Finally managed to scan some pics,....

...so I'm resurecting this thread.
First, The Church of Major Danger.
trainchurch.jpg

Next up,...The Artists' Loft
Artistsloft.jpg

Urban Renewal,...
UrbanRenewal.jpg

The view from across the valley into town.
Viewfromoutsidetown.jpg

And finally, some townsfolk at leisure.
Recreation.jpg
 

MrNewportCustom

Call Me a Cab
Messages
2,265
Location
Outer Los Angeles
The Crystal Mountain Line.

I'll need to find pictures of my father's layout, and take some more of his hobby, if it's not buried. He built a room that engulfed nearly half the garage for his layout. He was a life-long HO scale builder, and did a lot of kitbashing and modifying (I've mentioned the TRAC II vent he made). His line was CML, or Crystal Mountain Line. The layout was dismantled about a year after he died, but we kept the bridges, buildings, locomotives and cars, including a number of brass steam engines - some assembled, a couple not. We even kept a fenced in area on his layout that he'd called; Chanel Stockyard No. 5. That was his big joke on the layout.

Although he had built the layout, he much prefered working on the trains and structures over improving the layout. There wasn't a finished hill or tunnel to be found, but the tracks always worked and made a complete loop or two around the "Train Room," as we called it.

He hated the jerkiness of model trains, and for the last ten years or so that he was building them he'd developed a flywheel system that allowed him accelerate smoothly and to "creep" his trains around at very low speeds. He had fellow hobbyists coming to him, asking him how he did it (Bill Crane, of "Crane's Trains and Hobbies" would tell them). He was always happy to show them.

I remember that my mother was always telling him that he needed to dust them off, because of all the dirt he'd allow to accumulate on them. Then, one day, she went with him to view some real trains from a bridge. After seeing how dirty they were on top, she stopped telling him to dust his.

We sorted through everything and there's still a lot of unopened packages of parts, some brass, and a number of cars that were never started. Most of them would be from the seventies, maybe early eighties. He stopped because his health started deteriorating and his eyesight got progressively worse.

He also dabbled in N Scale, and for Christmas he built a game for the family. The object was to move all the cars from one side of the layout to the other into specific locations. There were eight spurs, each with a car, and only one central crossover. You could have no more than two cars on only one spur at any given time. It is still in one piece, but the engine and cars are stored away.

I have a friend who works for at least two train magazines. One is on real trains, and the other, I think, is for model railroaders. If you see a byline and "photos by" for one Robert (or Bob) Gallegos, that's him.


Lee
 

Mike K.

One Too Many
Messages
1,479
Location
Southwest Florida
I used to love model railroads...still do. Although it never happened and probably never will, I always wanted to have an entire room-sized layout complete with wooden truss bridges, mountains, mines, rivers, the whole works. I was always a big fan of N scale specifically because of its smaller size.
This is one of my favorites
65869.jpg

The real thing used to make special summer runs through the city where I grew up. Don't know if it's still operational or not.
 

MrNewportCustom

Call Me a Cab
Messages
2,265
Location
Outer Los Angeles
CharlieH. said:
Mr Newport, the name of your father's pike rings a bell, was it ever featured in a magazine?

Not that I know of, Charlie. I don't recall.

:eek:fftopic:
But I do remember Tom Daniel, model designer for Monogram, stopping by for a visit, now and then, and I remember building "Vandal", "Baja Beast", "T'Rantula", "Dune Rat", "Dog Catcher, "Quicksilver" and "Cal Street Vette". When I was a kid, I "stood guard" over the real Cal Street Vette, one evening, while he was visiting. It was a metalic pearlescent white at the time. (I guess I should have saved this tidbit for the "What Celebrities Have You Met?" thread. lol)



Lee
 
Mike in Seattle said:
If I remember correctly...to do an "Uncle Fester" you have to reverse the wires on one engine so it'll run backwards. I believe they're all wired to run the same direction from the factory.
Or use DCC.

I used to be a passenger-train modeler and was thinking of switching from HO to N, but my preferred manufacturer (Dennis Sautters at Laser Horizons) has left the business indefinitely, and the Walthers "passenger train collection" releases won't cover everything. Guess I'm stuck, until somebody else enters the market with laser-cut sides like Mr. Sautters made... (The brass game's out of the question.)
 

CharlieH.

One Too Many
Messages
1,169
Location
It used to be Detroit....
Diamondback said:
I used to be a passenger-train modeler and was thinking of switching from HO to N, but my preferred manufacturer (Dennis Sautters at Laser Horizons) has left the business indefinitely, and the Walthers "passenger train collection" releases won't cover everything. Guess I'm stuck, until somebody else enters the market with laser-cut sides like Mr. Sautters made... (The brass game's out of the question.)

Or you could kitbash a few cars. Somewhere I've an article about building B&O's Capitol Limited from Bachmann and Rivarossi equipment....

(Oh for a full model of the 1937 Super Chief...)
 

CharlieH.

One Too Many
Messages
1,169
Location
It used to be Detroit....
Practice, mac, practice. I used to be as jittery as, dare I say it, a rattlesnake's noisemaker, but years of toying with the knife steadied things quite a bit. And not once have I cut myself.
 

Similar threads

Forum statistics

Threads
109,127
Messages
3,074,654
Members
54,105
Latest member
joejosephlo
Top