-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Late fathers vintage leather coat ,help with age and make
- Thread starter PDO
- Start date
Thank you , do you have any suggestions on what to use that would not change the colour /patenia very much .
Vaseline works, but there are many threads on the topic, like this one:
https://www.thefedoralounge.com/threads/ultimate-leather-conditioner-comparison-on-reddit.101735/
The reason I don’t like Tenderly is while the jacket gets softer when wet, in 2-3 weeks it gets stiff again as if you’d done nothing. Urad is like varnishing your jacket. Good old Pecards is a pretty safe bet. Any darkening usually lightens back in a few months.
https://www.thefedoralounge.com/threads/ultimate-leather-conditioner-comparison-on-reddit.101735/
The reason I don’t like Tenderly is while the jacket gets softer when wet, in 2-3 weeks it gets stiff again as if you’d done nothing. Urad is like varnishing your jacket. Good old Pecards is a pretty safe bet. Any darkening usually lightens back in a few months.
I read the thread before and it appears that most products appear to darken the jacket ---not to be unexpected . Checking Urads website for older jackets they suggest mixing together tenderly and there cream which contains both lanolin and carnauba wax . Not sure if this is meant to deal with the drying off of just strait tenderly . My experience with this product is as you note . Test patches returned to the previous condition in short order . I was only using very limited amounts of the product .
Featured products
-
John Lofgren Monkey Boots Shinki Horsebuttt - $1,136 The classic monkey boot silhouette in an incredibly rich Shinki russet horse leather. -
Grant Stone Diesel Boot Dark Olive Chromexcel - $395 Goodyear welted, Horween Chromexcel, classic good looks. -
Schott 568 Vandals Jacket - $1,250 The classic Perfecto motorcycle jacket, in a very special limited-edition Schott double rider style.
iknowleather
Vendor
- Messages
- 42
- Location
- Avon, IL.
clever! good tip
For most cowhide and some horsehide I like using Urad after the Tenderly because it helps seal up loose fibers on cuff edges, etc, where the top layer of the skin is worn away. Since it has a little natural wax, it helps keep rain out but moisture in, helps protect from UV rays, and I personally just really like the look and feel of a little gloss. Depending on the condition of the leather (if it's not too dry) and you put it on without using the Tenderly first, it may get a little shiny. I recommend using the Urad on the edges of the cuffs, pocket edges, etc between whole jacket applications, to give them that extra protection. If you have a jacket that the edge of the cuffs have worn clear through and they have holes and are separating , well that's the damage I like to prevent with the signature Urad formula. But I always recommend the Tenderly. You can't go wrong with the stuff!
I love Tenderly!! Combined with the signature formula, Urad, it does amazing things for leatherjackets! I've tried Pecards, Leather Honey, and MANY others. In my experience (decades) nothing compares to the Urad line of products. Tenderly is straight cream, no wax. It just deeply moisturizes and can make lambskin feel just like silk. If you want a strictly matte finish it's all you need. It's the best for pull-up leathers!
For most cowhide and some horsehide I like using Urad after the Tenderly because it helps seal up loose fibers on cuff edges, etc, where the top layer of the skin is worn away. Since it has a little natural wax, it helps keep rain out but moisture in, helps protect from UV rays, and I personally just really like the look and feel of a little gloss. Depending on the condition of the leather (if it's not too dry) and you put it on without using the Tenderly first, it may get a little shiny. I recommend using the Urad on the edges of the cuffs, pocket edges, etc between whole jacket applications, to give them that extra protection. If you have a jacket that the edge of the cuffs have worn clear through and they have holes and are separating , well that's the damage I like to prevent with the signature Urad formula. But I always recommend the Tenderly. You can't go wrong with the stuff!
iknowleather
Vendor
- Messages
- 42
- Location
- Avon, IL.
iknowleather
Vendor
- Messages
- 42
- Location
- Avon, IL.
From my experience restoring thousands of leather jackets, I'm guessing you needed more than one application of the Tenderly. As for the Urad, I can guess the condition of your leather if you only used the Urad and found it to be very glossy. If the leather is dry I always fill the pores with the Tenderly first so when I go to put the Urad on it, I can get a very thin application for just a little gloss. If I want Urad on a jacket, I mix a little Tenderly in with it, even after an application of Tenderly. It makes it easier to control the amount of Urad you want on the jacket. Maybe a little more work to use a combination of products, but I find the result is well worth it!
FYI- if jackets come into the shop I can always tell if they have had something like vasoline, mink oil, that type of thing used on them. They feel like they've come out of a body shop or garage. Those types of products are good for sealing out moisture on your boots, but they attract dirt for one thing, and if someone has used mink oil on their jacket for years, they are sending it for repair because it is falling apart. You can literally take hold of it and pull it apart, the fibers just give way.
I hesitate to offer this because I don't want to offend or correct people. But perhaps the tip of judging just how much moisture you need to do the job, and how I've found to use the Urad for exceptional results could help.
Kindest regards,
Dena
FYI- if jackets come into the shop I can always tell if they have had something like vasoline, mink oil, that type of thing used on them. They feel like they've come out of a body shop or garage. Those types of products are good for sealing out moisture on your boots, but they attract dirt for one thing, and if someone has used mink oil on their jacket for years, they are sending it for repair because it is falling apart. You can literally take hold of it and pull it apart, the fibers just give way.
I hesitate to offer this because I don't want to offend or correct people. But perhaps the tip of judging just how much moisture you need to do the job, and how I've found to use the Urad for exceptional results could help.
Kindest regards,
Dena
Thank you for your detailed comments as everyone has difference experiences and thoughts on the subject . The Urad web site suggest a mixture of Tenderly and Urad . The coat was my late fathers and was last worn in the late 60,s and in storage since then and never treated with anything . Its a size 40 and i take a size 46 so I may just put it on a mannequin and display it if my wife allows me as she would like me to sell it . The jacket has such a nice patina and if quite beautiful to look at at least from my perspective .
Daniel Veit
One of the Regulars
- Messages
- 177
Bookmarked ! Thank you.
dr greg
One Too Many
- Messages
- 1,590
every design point says pre-war to me, what a beautiful thing, there are leather preparations that don't darken the patina, and if they slightly do, it goes away, however i dunno what brands you have over there, that is a treasure fo sho
Edward
Bartender
- Messages
- 25,084
- Location
- London, UK
Great looking jacket. It would certainly be possible (if not exactly cheap) to have it framed in a wall-mounted 'box', like a museum display. Nice details on it, too - I like the back especially (I've had my eye on an Aero Sunburst for some time!).
