Thanks Krik..umm..well I found some pics from another user with a nice indy bash as well..BUT would love to know more about this "rolling pin" technique youre talking about..Thanks much.
-
The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
I love the Fed IV!!
- Thread starter Johnny.
- Start date
Featured products
-
Gustin Vintage Heavyweight Sweatshirt - Natural Rainbow Nep - $119 Rugged 14oz cotton that gets better with every wear. -
Grant Stone Diesel Boot Dark Olive Chromexcel - #395 Goodyear welted, Horween Chromexcel, classic good looks. -
Himel Bros. - The Ross Mk. 1 Leather Jacket Classic D-pocket motorcycle/aviator style jacket.
scottyrocks
I'll Lock Up
- Messages
- 9,178
- Location
- Isle of Langerhan, NY
A rolling pin is hardly necessary, and automatically dictates the shape of the dent. Your hands can do just as good a job, if not better, and you can achieve a more personal shape with your hands, as well.
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
[video=youtube;v1R3qWa9zz8]http://www.youtube.com/watch?feature=player_embedded&v=v1R3qWa9zz8[/video]
Mikieson, here is the video that DJH put out on a thread here on the lounge. Bottom line is that there are several ways to do it. I have done one by hand and then I did the Fed IV using this technique and it worked great. Have fun bashing it.
Kirk H.
Mikieson, here is the video that DJH put out on a thread here on the lounge. Bottom line is that there are several ways to do it. I have done one by hand and then I did the Fed IV using this technique and it worked great. Have fun bashing it.
Kirk H.
humm...thats interesting..lol..what I like about being an animal is...we find a tool for everything..hahaha..
..thanks for the video..Ive seen a few different ones..I like watching ALL I CAN just for the learning of it..I love seeing how hats are made from beginning to end..Its so great.not necessary, but i like that it gives it a nice uniform look..I think its pretty cool..I one of those ITS NOT CENTERED guys..I can tell when something is off by as little as a 1/4"..I was in construction for 14 years and people always said LET MIKE look..he has a "natural eye"..lol..Its a curse!!!..
m0nk
One Too Many
- Messages
- 1,004
- Location
- Camp Hill, Pa
Ah, but a part of the "Indy" style is to have the hat a little off, done by hand, turned, and eventually, heavily worn. The Raiders hat had some turning so that the bow was closer to the front of Ford's heat prior to the pinch being done. That way, the hat isn't on strait, but the pinch can be even with the face. Eventually, the Fed IV will conform to your head regardless of whether there's a turn. Mine has a rather slight one, but almost by accident, and it works out very well.not necessary, but i like that it gives it a nice uniform look..I think its pretty cool..I one of those ITS NOT CENTERED guys..I can tell when something is off by as little as a 1/4"..I was in construction for 14 years and people always said LET MIKE look..he has a "natural eye"..lol..Its a curse!!!..
As mentioned before, there's a lot on COW about transforming your hat into the Indy hat of lore, including some nice details on how to artificially distress it without damaging it.
cybergentleman
A-List Customer
- Messages
- 331
- Location
- New Jersey
To me, the one on the left appears to have some taper, as the front bash leans inward- I have this issue on my Christy's adventurer. With a ruler against it, it is not plumb.
Has anybody here replicated the bash on the right with their feds? It is this discrepancy that prevents me from buying one actually.
Has anybody here replicated the bash on the right with their feds? It is this discrepancy that prevents me from buying one actually.
Well someone replicated it cause its done..lol..but my deal is I want to know HOW to do it? How did he get his perfect? What did he do differently that the other guy didnt? OR maybe the guy on the left didnt want his to look like the one on the right?..
jlee562
I'll Lock Up
- Messages
- 5,099
- Location
- San Francisco, CA
The hat on the left has a deeper center dent, and goes down farther in the back. The front pinch is much tighter and goes closer to the ribbon than the one on the right. The dents are also creased much more sharply which is causing the hat to "pull back" and taper. Compare it to the side view of my Fed for example:
The first two pics of the hat on the left show how sharply the crease has been put into the hat. This is not really the best way to treat the felt.
The first two pics of the hat on the left show how sharply the crease has been put into the hat. This is not really the best way to treat the felt.
can you take a pic of your top bash please?? and your crown profile is perfect as well. AS far as "not being the best way to treat the felt"..that is how indy's hat is in Raiders and how many people like their hats. Im sure the felt can take it..or Im assuming it can as its tough..BUT thanks and hope to see more pics..The hat on the left has a deeper center dent, and goes down farther in the back. The front pinch is much tighter and goes closer to the ribbon than the one on the right. The dents are also creased much more sharply which is causing the hat to "pull back" and taper. Compare it to the side view of my Fed for example:
The first two pics of the hat on the left show how sharply the crease has been put into the hat. This is not really the best way to treat the felt.
jlee562
I'll Lock Up
- Messages
- 5,099
- Location
- San Francisco, CA
The Raiders hat is a COSTUME hat. A razor sharp pinch like that was, to say the least, uncommon. And no, it is not good for the felt. Is Akubra felt tough as nails? You betcha. But that doesn't mean that the razor sharp pinch isn't going to wear down the felt faster than a hat that has a more gentle crease.
Last edited:
scottyrocks
I'll Lock Up
- Messages
- 9,178
- Location
- Isle of Langerhan, NY
Then there is the amount, or severity, of 'razorness'. A compromise between the two hats above is to extend the pinch all the way down to the ribbon but not pinch it so tightly that you can cut yourself on the edge.
This is my Fed IV with what I consider to be a compromise between the two hats pictured above.
The hat on the right in the above series has a front pinch that is more like the hats in the other IJ movies (not Raiders). It doesn't extend all the way down to the ribbon.
This is my Fed IV with what I consider to be a compromise between the two hats pictured above.
The hat on the right in the above series has a front pinch that is more like the hats in the other IJ movies (not Raiders). It doesn't extend all the way down to the ribbon.
Can we see a profile of the hat please?? nice hat by the way..Then there is the amount, or severity, of 'razorness'. A compromise between the two hats above is to extend the pinch all the way down to the ribbon but not pinch it so tightly that you can cut yourself on the edge.
This is my Fed IV with what I consider to be a compromise between the two hats pictured above.
The hat on the right in the above series has a front pinch that is more like the hats in the other IJ movies (not Raiders). It doesn't extend all the way down to the ribbon.
scottyrocks
I'll Lock Up
- Messages
- 9,178
- Location
- Isle of Langerhan, NY
Sure thing. And thanks.
I like a little front taper. You can adjust the amount by playing with the top dent and front pinches.
I like a little front taper. You can adjust the amount by playing with the top dent and front pinches.
Last edited:
looks good..cant wait to get mine in...I'll prob just take it out and look at it..Sure thing. And thanks.
I like a little front taper. You can adjust the amount by playing with the top dent and front pinches.
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
Here are some more shots of my Fed IV with an Indy Bash.
That looks good. I notice that you have a pretty deep bash on top but still have very little crown taper in the side profile. According to some the deeper the top bash the more it tends to taper in?..So..does your hat go against the norm? OR are there other factors when shaping? Thanks for the good pics..nice..[/IMG]
[/IMG]
[/IMG]
Here are some more shots of my Fed IV with an Indy Bash.
Kirk H.
One Too Many
- Messages
- 1,196
- Location
- Charlotte NC
The center dent is about 1/2" deep. When I was putting in the center dent I went slow as to control the amount of taper.
Kirk
well i got my fed iv in today..bashed it and dented it..I like the hat a lot..just not crazy about the color. Its dark..not even close to INDY like I was wanting.......Does it lighten up over time? Can you lighten it up? Has anyone here used a dye? OR anything to get a browner look?
.....Does it lighten up over time? Can you lighten it up? Has anyone here used a dye? OR anything to get a browner look?
