How many new jackets do you have coming (and how many potential ones)?

[ABCD]

Cool jacket, and great fit! Did you post a review of it on here anywhere? I'd be curious to see more photos and hear your thoughts on it.

Thanks, this was my very first custom jacket. Additional pics:

https://www.instagram.com/p/CNuB7sshdAc/?utm_medium=copy_link

Review:

https://www.thefedoralounge.com/thr...view-mtc-127915-in-brucuato-horsehide.100881/

 

[torfjord]

I'm back in Europe after a few years in roasting hot Asia, so I can justify a new jacket once again. I think Aero's bootlegger looks great, as does their board/cafe racer in Buco J-100 trim. I have some brown CXL samples, in steer and horse, and they look great, especially the HH. I've had an eye on a new Aero for years, but I'm a bit concerned about mobility- Vicenza is lighter and softer but looks kinda flat and overly uniform to me, CXL looks wonderful but can be extremely stiff from experience, and the Badalassi seems to swing both ways.

Or I could spend twice as much money and buy this from Thedi:
https://thedi-leathers.com/product/cafe-racer-mtc-127920/

My vote would also go to Thedi. They are more expensive but they are worth it.

 

[Rich22]

Thanks, this was my very first custom jacket. Additional pics:

https://www.instagram.com/p/CNuB7sshdAc/?utm_medium=copy_link

Review:

https://www.thefedoralounge.com/thr...view-mtc-127915-in-brucuato-horsehide.100881/

Thanks for sharing! Your jacket is very similar to the one I have my eye on- looks super! I didn't realise the leather was aniline, though... did Theodoros make any suggestions for how to care for it? The washed and waxed version of the leather looks very interesting and unique. That's why I like it, despite it being a few shades lighter than my usual preference.

 

[ojaw]

There’s a lot to love about Thedi but the finishes I see on most of their jackets seem overwrought to me; the washing pre-ages them and the waxing makes them less breathable, I’d rather put my own stamp on whatever one I buy. I understand that they are available without the extra treatment, is this so? In fact, Mark, yours looks much more demure than many I’ve seen online.

 

[ABCD]

I didn't realise the leather was aniline, though... did Theodoros make any suggestions for how to care for it?

I'm a huge fan of full aniline vegetable tanned leather. I don't treat it any differently than pigment dyed leathers. I certainly don't baby it. What are your concerns?

There’s a lot to love about Thedi but the finishes I see on most of their jackets seem overwrought to me; the washing pre-ages them and the waxing makes them less breathable

Personally, I really like their finishings and I don't think they're overwrought at all. It adds just that bit of character right out of the box. It enhances the color depth. Very subtle imo.

Why do you think the beeswax makes the jacket less breathable? It's not like the jacket is drowned in wax like a Barbour. It's just a thin application.

I understand that they are available without the extra treatment, is this so?

True

 

[Rich22]

I'm a huge fan of full aniline vegetable tanned leather. I don't treat it any differently than pigment dyed leathers. I certainly don't baby it. What are your concerns?


Personally, I really like their finishings and I don't think they're overwrought at all. It adds just that bit of character right out of the box. It enhances the color depth. Very subtle imo.

Why do you think the beeswax makes the jacket less breathable? It's not like the jacket is drowned in wax like a Barbour. It's just a thin application.


True

View attachment 361169 View attachment 361170 View attachment 361171

I only have very limited experience with aniline leather- a nice leather sofa I had years ago- and the thing was ridiculously easy to stain compared to other leather furniture (e.g. with skin contact), and also a pain to clean and condition. What aniline jacket experiences have people here had? Maybe the Thedi beeswax treatment makes his leather a bit hardier?

 

[ABCD]

I own a lot of full aniline leather jackets. These are not waxed and there's not a single stain on any of them. Few more examples: Eastman uses full aniline Italian horsehide. Field Leathers offers full aniline Shinki.

 

[ojaw]

Personally, I really like their finishings and I don't think they're overwrought at all. It adds just that bit of character right out of the box. It enhances the color depth. Very subtle imo

Maybe I just don’t have the gravitas to pull it off.

[/QUOTE]Why do you think the beeswax makes the jacket less breathable? It's not like the jacket is drowned in wax like a Barbour. It's just a thin application.[/QUOTE]

I would assume that any added wax application would make leather less breathable, though I’ve never had the opportunity to compare jackets. You clearly have, so I bow to your experience.

 

[Rich22]

I guess what makes the whole aniline thing more confusing is that most leather jackets we discuss on this forum are aniline dyed rather than pigment dyed, but when finished are waxed/oiled/hot stuffed etc, to give them some water resistance. CXL is aniline dyed but heavily treated. Truly aniline leathers, without any treatment, are very absorbent, and wouldn't be very suitable for a garment taken outdoors. Having read about 'aniline leather' for the last hour (as I previously knew little about it), it appears quite a misleading term- it's essentially good full grain leather that had a natural rather than pigment finish, but beyond that can take very many shapes and forms. My favourite boots, for example, are technically aniline, but the leather bears little resemblance to my absorbent aniline sofa....

Edit: Some ponderings: Is there such a thing as a black jacket that is truly dark black all the way through? I thought black always wore off grey or brown? Are blackened brown jackets simply aniline brown jackets that have been given a pigmented finish on top? At what point does a jacket stop being fully-aniline and is considered merely aniline? After Theodoros has waxed one, for example? hmm...

 

[Monitor]

Not a jacket but madness goes on. Got a pair of SLP Jodhpur's in an elusive size 46 on the way. And I've got only @red devil to thank!

 

[ton312]

Spongebob popped in a day early. Super nice hide. Thick and heavier than I expected. Also really dusty. The chest zip was kaput, I fashioned one out of spare parts. I also waxed that half of the jacket. Lighting is not great but shows precisely why I love URAD. Fit is a bit generous for me. It’s tough to call as the elastic in the HB is pretty well shot. Pockets are indeed misaligned thanks to a hasty main zip repair. Not sure how far down the rabbit hole I’m willing to go with this one. Perhaps I’ll throw some fit fit pics up and let the court of public opinion decide.

 

[Jin431]

I guess what makes the whole aniline thing more confusing is that most leather jackets we discuss on this forum are aniline dyed rather than pigment dyed, but when finished are waxed/oiled/hot stuffed etc, to give them some water resistance. CXL is aniline dyed but heavily treated. Truly aniline leathers, without any treatment, are very absorbent, and wouldn't be very suitable for a garment taken outdoors. Having read about 'aniline leather' for the last hour (as I previously knew little about it), it appears quite a misleading term- it's essentially good full grain leather that had a natural rather than pigment finish, but beyond that can take very many shapes and forms. My favourite boots, for example, are technically aniline, but the leather bears little resemblance to my absorbent aniline sofa....

Edit: Some ponderings: Is there such a thing as a black jacket that is truly dark black all the way through? I thought black always wore off grey or brown? Are blackened brown jackets simply aniline brown jackets that have been given a pigmented finish on top? At what point does a jacket stop being fully-aniline and is considered merely aniline? After Theodoros has waxed one, for example? hmm...

I get it man it can be so confusing. Try not to overthink it. Full aniline is good for you if you want a nice smooth leather where you can appreciate color variations and if you don't mind imperfections in the hide and this type of leather is not good in the elements at all. Semi aniline is good if you still want something uncorrected full grain leather with a light layer of paint that will make a more uniform color and that will have better protection with the rain/abrasion.

There are plenty of full aniline full vegetable tanned dyed black all the way through the core (shinki/Badalassi/tochigi as well as some Horween hides to name a few), they are dyed but there is no finish to the outer layer so it is porous and will absorb moisture rather quickly. If the black leather is pigment (paint) finished then it will probably show some sort of brown core. I believe a gray/blue core is more common with chrome tanned jackets.

I believe a blackened brown leather is a semi aniline finish where the leather is dyed brown and then finished off with a light layer of paint that will wear off and show brown when it does.

If someone waxes or oils a leather then it's just basically an oiled/waxed finished leather, it will eventually wear off with time and wear but the leather will still be whatever the base leather is whether it's full aniline/semi aniline/pigment finished

 

[El Marro]

Personally, I really like their finishings and I don't think they're overwrought at all. It adds just that bit of character right out of the box. It enhances the color depth. Very subtle imo.

I agree 100%. Thedi and Eastman are two makers who do the aging thing just right.

 

[Rich22]

Let's take Shinki as an example- it's fully aniline dyed, but in its finished state it's not a 'fully aniline leather' due to the finishing/oiling/treatments. The only leather sample I've held from any jacket manufacturer that is "pigmented" as opposed to aninile is Aero's goatskin, which is ******proof. "Pigmented" also seems a ****** stupid term, as with leather it means lacquered or coated in plastic, which is a million miles from the dictionary definition. All "real" leather should be plastic free, but then again, someone co-opted 'real leather' to mean 'it contains some actual leather.'

edit: Himel describes Shinki leather that has been oiled/waxed as having a 'pigment finish', as well as some Shinki that has been 'painted'. Honestly, I give up. Even the experts put out conflicting information. https://himelbros.com/pages/learn-about-our-leather

 

[Jin431]

Let's take Shinki as an example- it's fully aniline dyed, but in its finished state it's not a 'fully aniline leather' due to the finishing/oiling/treatments. The only leather sample I've held from any jacket manufacturer that is "pigmented" as opposed to aninile is Aero's goatskin, which is ******proof. "Pigmented" also seems a ****** stupid term, as with leather it means lacquered or coated in plastic, which is a million miles from the dictionary definition. All "real" leather should be plastic free, but then again, someone co-opted 'real leather' to mean 'it contains some actual leather.'

edit: Himel describes Shinki leather that has been oiled/waxed as having a 'pigment finish', as well as some Shinki that has been 'painted'. Honestly, I give up. Even the experts put out conflicting information. https://himelbros.com/pages/learn-about-our-leather

They can call it whatever or categorize it however they want but it's still just leather. It's just a bunch of industry terms that they use for marketing and to differentiate articles of leather. Shinki leather is a broad term, like Horween they make a lot of hides that are dyed differently and finished differently whether oiled/waxed/full aniline/semi aniline/pigment/black teacore/brown teacore/I read there is even a grey or reddish brown core too. There are even tumbled shinki hides lol

To keep it simple if you want to keep your black jacket black go pick a full aniline leather however it's finished oiled/waxed/no finish and if you want to have your black jacket show brown undertones go pigment/teacore.

 

[Monitor]

Honestly, I give up. Even the experts put out conflicting information. https://himelbros.com/pages/learn-about-our-leather

And you should!

The only leather experts are the people working at the tannery. Leather jacket makers are tailors & designers and they certainly ain't tanning experts. They'd be waaay better off just saying "This is our brown leather and this is our black leather. They're all pretty cool!" 'cause frankly, at this point, that's all I wanna know.

Believe me, the only thing that makes sense is to forget 90% of "terminology" you hear getting thrown around out and just focus on color, texture and thickness (though even that part is filled with bs).
What @Jin431 says, it's just marketing techno-babble. Process of tanning is very complicated & by the time any information on how a batch of leather that some specific maker sourced has been tanned, gets transformed into a blurb on some retail platform, it went through so many levels of misunderstanding that it's best to simply ignore it.

I mean, retail websites can't even tell the difference between leather that's been split into layers & leather that a machinist flips upside-down before starting working on a jacket. Most of the internet believes Shinki is a type of leather!

What's happening is that you're hearing all of these terms from people who've never set foot into a tannery. For instance, read the descriptions on Himel's "about our leathers" page - You'll notice that all "descriptions" consist of the exact same terms that have been slightly rearranged. They can't even get the suede bit right!

But that is okay!
Because leather jacket makers themselves aren't even sure what they're buying and will for the most part just source leather that's got all the characteristics their product is known for; ie. what they're used to working with and ultimately, what the consumer expects from them.

It often happens to the tannery that they run out of a certain type of leather, which then forces makers to look for the closest match. I mean, that won't happen to Fine Creek or Real McCoy but it happens. It happened to Schott and Vanson. But what I'm getting at, not even the machinists will notice something's changed, let alone people who talk about tanning on social platforms.

People who have been in the industry for decades will happily tell you they don't care how the leather has been tanned as long as it checks all the boxes they require and I do believe that's actually a very healthy approach to all of this.

 

[ABCD]

And you should!

The only experts are the people working in the tannery. Leather jacket maker certainly isn't an expert in tanning. They'd be waaay better off just saying "This is our brown leather and this is our black leather. They're all pretty cool!" 'cause frankly, at this point, that's all I wanna know.

Believe me, the only thing that makes sense is to forget every single one of those terms you hear getting thrown around out there. What @Jin431 says, it's just marketing techno-babble. Process of tanning is very complicated & by the time any information on how a batch of leather that some specific maker sourced has been tanned, gets transformed into a blurb on some retail platform, it went through so many levels of misunderstanding that it's best to simply ignore it.

I mean, retail websites can't even tell the difference between leather that's been split into layers & leather that a machinist flips upside-down before starting working on a jacket. Most of the internet believes Shinki is a type of leather!

What's happening is that you're hearing all of these terms from people who've never set foot into a tannery. For instance, read the descriptions on Himel's "about our leathers" page - You'll notice that all "descriptions" consist of slightly rearranged exact same terms. They can't even get the suede bit right!

But that's okay! Because leather jacket makers themselves aren't even sure what they're buying and will for the most part just source leather that's got all the characteristics their product is known for; ie. what they're used to working with and ultimately, what the consumer expects from them.

It often happens that a tannery runs out of a certain type of leather, which then forces a maker to look for the closest match. I mean, that won't happen to Fine Creek or Real McCoy but it happens. But what I'm getting at, not even the machinists will notice something's changed, let alone people who talk about tanning on social platforms.

People who have been in the industry for decades will happily tell you they don't care how the leather has been tanned as long as it checks all the boxes they require and I do believe that's actually a very healthy approach to all of this.

All of this is true. But I still think it IS useful to realize that different finishes come with different characteristics that may or may not be suited for your particular goal.

E.g. full aniline leather without any topcoat will soak up water like a sponge. Therefore it might not be your first choice when looking for a jacket for riding.

 

[handymike]

I agree with @Monitor. It would be fantastic for makers to simplify and just show us the color/details of a select few beautiful leathers and be done.
In this internet/ over-info age, simplicity is precious.

 

[Mrfrown]

Then you have Iron Heart’s approach - this is the leather, the guru has selected it, buy it or not! Obviously the faithful are accustomed to this approach, but I do think it has wider appeal by simplifying things.

 

[Mrfrown]

Speaking of Iron Heart, my first piece is this Wabash vest. Took some impromptu photos this morning. Figured out that I need to pull in the backstrap a bit as it has no taper. I think it adds a nice pop!