Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

JeffOYB

Vendor
Messages
208
Location
Michigan
Thanks!

So beaver is better. Sounds like it wears really well. Does it look different? Could a passerby tell? I mean, I *like* seeing anyone wearing a good Panama hat. Is it as nice seeing a good felt hat? Does beaver breathe different from wool while being worn? Will beaver stand up to being rained on?

My Stetson is a Soverign. I've had it 30 yrs, wear it a dozen times every autumn/winter/early spring. Likely cost around 100.

...I have two hats from my grampa -- maybe from the 20s-30s. A bowler and top hat. Wonder what they're made of... Bowler is Dunlap Superb, a dull smooth look. Top hat is shiny and a bit "hairy".
 

Rmccamey

I'll Lock Up
Messages
5,872
Location
Central Texas
We'd love to see pictures!

Thanks!

So beaver is better. Sounds like it wears really well. Does it look different? Could a passerby tell? I mean, I *like* seeing anyone wearing a good Panama hat. Is it as nice seeing a good felt hat? Does beaver breathe different from wool while being worn? Will beaver stand up to being rained on?

My Stetson is a Soverign. I've had it 30 yrs, wear it a dozen times every autumn/winter/early spring. Likely cost around 100.

...I have two hats from my grampa -- maybe from the 20s-30s. A bowler and top hat. Wonder what they're made of... Bowler is Dunlap Superb, a dull smooth look. Top hat is shiny and a bit "hairy".
 
Messages
10,855
Location
vancouver, canada
Thanks!

So beaver is better. Sounds like it wears really well. Does it look different? Could a passerby tell? I mean, I *like* seeing anyone wearing a good Panama hat. Is it as nice seeing a good felt hat? Does beaver breathe different from wool while being worn? Will beaver stand up to being rained on?

My Stetson is a Soverign. I've had it 30 yrs, wear it a dozen times every autumn/winter/early spring. Likely cost around 100.

...I have two hats from my grampa -- maybe from the 20s-30s. A bowler and top hat. Wonder what they're made of... Bowler is Dunlap Superb, a dull smooth look. Top hat is shiny and a bit "hairy".

The answer is..."it depends". A good quality beaver felt will stand up to just about anything you can throw at it and while not water proof it is water resistant. Take care of it and it will last two lifetimes, abuse it and will look like crap quickly......so it depends.
We were in Costco yesterday and a man walked by wearing a hat....my wife asked "do you like his hat?". I grunted and said no as it is a cheap wool hat. My wife (who wears hats a lot) asked "how did I know?".

So the likely answer is the average joe on the street will not be able to tell you if it is wool or rabbit or beaver or.........you ask them the answer is likely to be...."Its a hat"
 
Messages
19,001
Location
Central California
Thanks!

So beaver is better. Sounds like it wears really well. Does it look different? Could a passerby tell? I mean, I *like* seeing anyone wearing a good Panama hat. Is it as nice seeing a good felt hat? Does beaver breathe different from wool while being worn? Will beaver stand up to being rained on?

My Stetson is a Soverign. I've had it 30 yrs, wear it a dozen times every autumn/winter/early spring. Likely cost around 100.

...I have two hats from my grampa -- maybe from the 20s-30s. A bowler and top hat. Wonder what they're made of... Bowler is Dunlap Superb, a dull smooth look. Top hat is shiny and a bit "hairy".


The top hat is likely silk plush. The bowler/derby could be fur felt or it could be wool felt.

Beaver is not always better. Many of the fantastic vintage hats we hunt so hard for are rabbit and/or hare. When you’re choices are modern felts then beaver starts showing it’s advantages. For a fedora, I like one felt makers 50% beaver 50% ??? (rabbit or hare) felt better than their 100% beaver. It’s not fair to say that beaver is always better than other fur felts.

If hats are one of your “things” you will be able to tell good hats from cheap hats pretty easily. You usually can’t distinguish the type of felt of passing hat wearers.
 

glider

A-List Customer
Messages
389
No one has commented on Nutria and how it compares . I'd be interested to know if clear beaver is actually much better than say a 6X beaver open road . Actually , what does clear beaver mean ?
 
Messages
10,855
Location
vancouver, canada
No one has commented on Nutria and how it compares . I'd be interested to know if clear beaver is actually much better than say a 6X beaver open road . Actually , what does clear beaver mean ?
I have 2 vintage Stetson Nutria hats, love the felt but I am not sure if it is 100% nutria or some % blend. I have also worked on 2 modern Winchester Nutria felts and love them. They are great to work with and make wonderful hats. The felt is soft, dense, plush. If I could get a regular supply of these felts I would focus on them. I have also worked on the Sunrise Nutria felts and like them a lot less. They are hard to work with, stiff and I have yet to work on one that didn't mottle at some point early in the pouncing process. Both the Sunrise and Winchester are 100% Nutria but are very very different iterations.
 
Messages
19,001
Location
Central California
No one has commented on Nutria and how it compares . I'd be interested to know if clear beaver is actually much better than say a 6X beaver open road . Actually , what does clear beaver mean ?


I have (might have sold it?) a fairly modern Stetson 6X Open Road. It is a completely different felt than the the three 7X Clear Beaver hats that have come through my hands. The 7XCB is head and shoulders better using just about any metric you can think of. In fact, they are about as far apart as two fur felt hats can be. The 1960s and more recent Stetson 10X Beaver through 3X Beaver hats can be decent or better hats, but the samples I’ve owned aren’t anything like the vintage 7XCB.
 
Messages
19,001
Location
Central California
I have 2 vintage Stetson Nutria hats, love the felt but I am not sure if it is 100% nutria or some % blend. I have also worked on 2 modern Winchester Nutria felts and love them. They are great to work with and make wonderful hats. The felt is soft, dense, plush. If I could get a regular supply of these felts I would focus on them. I have also worked on the Sunrise Nutria felts and like them a lot less. They are hard to work with, stiff and I have yet to work on one that didn't mottle at some point early in the pouncing process. Both the Sunrise and Winchester are 100% Nutria but are very very different iterations.


I think this is a consistently issue with nutria felts from Sunrise. Some come with a lot of stiffeners and some with a lot less. There’s also the dyeing of the felt: I’m not sure that Sunrise’s all natural dyes are as effective as what other felters use. That said, I have three Sunrise nutria western hats that are near perfect in feel, stiffness, and in-mottled finish. My last 100% nutria in dress weight is also about perfect. I can blow a crease in the crown it’s so thin and soft, but it’s also dense and perfectly smooth. The color is consistent too. It’s a very different hat from beaver. I have no doubt that the current nutria felt from sunrise is less consistent than beaver for Winchester or FEPSA.

As far as vintage nutria and vintage 5XCB or 7XCB, I don’t have enough experience with them to comment.
 
Messages
12,017
Location
East of Los Angeles
I know there are a number of "asked and answered" posts somewhere here on The Lounge that address the subject of re-sizing oversized hats on the cheap by placing folded paper towels and such behind the sweatband to take up that extra space. My question is a little more specific, and I'm hoping someone here can help. I recently bought a hat online, and it's generic sizing meant it was a bit of a gamble size-wise. I like the hat but, sure enough, it's up to a full size too large. I was thinking of using foam weatherstripping behind the sweatband, but as I've not done this before I'm left wondering which thickness might work out best to snug a hat down one full size? 1/8"? 1/4"? 3/8"? Perhaps more? If anyone has any first-hand experience with this, I would truly appreciate your advice and/or suggestions. Thank you in advance!
 
Messages
11,714
I know there are a number of "asked and answered" posts somewhere here on The Lounge that address the subject of re-sizing oversized hats on the cheap by placing folded paper towels and such behind the sweatband to take up that extra space. My question is a little more specific, and I'm hoping someone here can help. I recently bought a hat online, and it's generic sizing meant it was a bit of a gamble size-wise. I like the hat but, sure enough, it's up to a full size too large. I was thinking of using foam weatherstripping behind the sweatband, but as I've not done this before I'm left wondering which thickness might work out best to snug a hat down one full size? 1/8"? 1/4"? 3/8"? Perhaps more? If anyone has any first-hand experience with this, I would truly appreciate your advice and/or suggestions. Thank you in advance!
Oh... Sounds like the only answer is to hand it off to Brent @deadlyhandsome right away!

My experience had only been with using felt strips. Always liked the idea of weather stripping. But never tried that one. Would be interesting if there was an appropriate conversation. But it would definitely depend on how much weather stripping was used. For example. 4 inches of 1/2 inch vs 8 inches of 1/4 inch
 
Messages
19,001
Location
Central California
I know there are a number of "asked and answered" posts somewhere here on The Lounge that address the subject of re-sizing oversized hats on the cheap by placing folded paper towels and such behind the sweatband to take up that extra space. My question is a little more specific, and I'm hoping someone here can help. I recently bought a hat online, and it's generic sizing meant it was a bit of a gamble size-wise. I like the hat but, sure enough, it's up to a full size too large. I was thinking of using foam weatherstripping behind the sweatband, but as I've not done this before I'm left wondering which thickness might work out best to snug a hat down one full size? 1/8"? 1/4"? 3/8"? Perhaps more? If anyone has any first-hand experience with this, I would truly appreciate your advice and/or suggestions. Thank you in advance!


I’ve heard of it being used before. I believe the consensus was to not peel off the backing exposing the adhesive.
 

jlee562

I'll Lock Up
Messages
5,103
Location
San Francisco, CA
When I took the last 7 1/8 Boss Raw Edge from JJ, they sent me a pair of these Cap Ban Nu to size down. They're a bit more expensive than stuffing some paper towel, but effective and pretty comfy. Also available on a popular e-commerce site named after a South American rainforest.
 
Messages
12,017
Location
East of Los Angeles
Oh... Sounds like the only answer is to hand it off to Brent @deadlyhandsome right away!
That would probably be the best and easiest solution. The only problems are that, if I remember correctly, he regularly wears two hat sizes larger than me, and he isn't a big fan of Porkpie hats. I could be wrong, and, Brent, if you read this and want the hat, send me your shipping address and I'll get it off to you A.S.A.P.!

I’ve heard of it being used before. I believe the consensus was to not peel off the backing exposing the adhesive.
That's pretty much the one thing I do remember--leave the backing on to make it easier to replace the weatherstripping if/when I need to.

When I took the last 7 1/8 Boss Raw Edge from JJ, they sent me a pair of these Cap Ban Nu to size down. They're a bit more expensive than stuffing some paper towel, but effective and pretty comfy. Also available on a popular e-commerce site named after a South American rainforest.
Nice, and thank you Jared! I'll look into those before I decide which course of action to take.
 
Messages
12,017
Location
East of Los Angeles
You can get leather strips from a leather supply store, there are a lot of different sizes so just get one about the width of the sweat band and put it behind the sweat band. That's the best solution I have found to downsize a hat. The leather will stay in place, easy peasy .
I hadn't thought about using leather, but now that you've brought it to my attention it makes sense. Thank you Sir!
 
Messages
12,017
Location
East of Los Angeles
How is it we often overlook the most obvious solutions :D:cool:
Oh, you have no idea. After I posted the initial question it occurred to me to just get a roll of the 1/8" x 1" foam weatherstripping, and if one layer wasn't enough add a second to make it 1/4" thick, and if that wasn't enough...

86oXLBE.jpg
 

Snowman

Practically Family
Messages
675
I used one of the strips that came with a new Stetson (on an older hat); I wish I hadn’t. It was the adhesive foam, essentially the same as weatherstripping. It is too thick and causes the sweat band to pucker, and there is no way to remove it without damaging the sweat. My go to now is felt strips cut from WalMart craft department squares. I’ve also used the foam craft squares when I needed a little extra thickness, and I’ve combined felt and foam. This method lets me customize the amount of padding in front and back and on the sides.
 

ILB Frank

One of the Regulars
Messages
205
I have found that a 10" x 52" neoprene belt has 101 uses. Among them is resizing a hat. It also keeps sweat from getting to the felt (it can be cut to a variable height to cover all of the forehead). Double sided scotch tape holds it in place and won't tear up the felt or the sweatband when you want to pull it apart.
 

Forum statistics

Threads
109,289
Messages
3,078,003
Members
54,238
Latest member
LeonardasDream
Top