Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.
Messages
10,857
Location
vancouver, canada
When put thru a grommet in the brim the proper way you pull it back up thru the grommets & loop it around the crown like a wind trolley when not in use. A stampede string lays around the ribbon or hatband. Those inside sweat cotter key things are a joke.
I have never been in a hurricane with mine but so far with just strong winds my stampede string works quite well.
 

regius

My Mail is Forwarded Here
Messages
3,300
Location
New York
It is called a 'Stampede String'...most western shops should stock them. Many online sellers as well. They work well, and are removable or you can hide them under the hat. Cheap too!
Looks like some would puncture two holes but some would insert the pin through the stitching of the sweatband. One of my hats has a glued band so I guess this one I’ll have to make two holes...
 
Messages
11,716
When I got this older Stratoliner. It was my assumption that the brim had at some point been trimmed to its current 2 inches and that it at some point in its life had a liner. Some discussions in other groups refute that theory.

My question here today isn’t so much what the real story of this hat is... that may never actually be known. But have we seen any early Stratoliner that came with shorter unbound edge. Or any Stratoliner that came with no liner and no branding on the felt.


Follow up question.. original consensus is late 40s to early 50s.... any opinions on age?

View attachment 255354
View attachment 255352 View attachment 255353 View attachment 255355

OK I managed to answer part of my Own question when I saw this old unlined Strat today. Seems they used a sticker badge on the felt In this case. So it is possible mine could have been unlined originally and sticker fell off over time. Now leaves the question if there were any Old strats without edge binding.

90CDAA2E-9822-4149-8251-EDBD4E3F874D.png
26E7C30B-E420-484D-BC2B-230AEDD97FCD.png
 
Messages
15,083
Location
Buffalo, NY
OK I managed to answer part of my Own question when I saw this old unlined Strat today. Seems they used a sticker badge on the felt In this case. So it is possible mine could have been unlined originally and sticker fell off over time. Now leaves the question if there were any Old strats without edge binding.

View attachment 255607 View attachment 255608

Hi Joe... I have owned several of the first generation Stratoliners (1941-42). All have a bound brim approximately 2 5/8” wide. Two have embroidered tip patches like the one shown above. One does not. It also has a different sweat stamping which is perhaps the earlier example. All have a retail price below Royal Stetson. I believe yours has definitely had a brim trim and most likely did have a liner at some point in time. It might be from the later 1940s or early 1950s. Had it been unlined originally I think it would have had a silkscreened Royal Stetson crest in the crown, similar to the Premier Quality Stratoliner from the mid 1940s (a guess). There are photos of these earlier hats in the Stratoliner (vintage) and the Hat Comparison threads. I will add a couple of photos here for you in a bit.
 
Messages
11,716
Hi Joe... I have owned several of the first generation Stratoliners (1941-42). All have a bound brim approximately 2 5/8” wide. Two have embroidered tip patches like the one shown above. One does not. It also has a different sweat stamping which is perhaps the earlier example. All have a retail price below Royal Stetson. I believe yours has definitely had a brim trim and most likely did have a liner at some point in time. It might be from the later 1940s or early 1950s. Had it been unlined originally I think it would have had a silkscreened Royal Stetson crest in the crown, similar to the Premier Quality Stratoliner from the mid 1940s (a guess). There are photos of these earlier hats in the Stratoliner (vintage) and the Hat Comparison threads. I will add a couple of photos here for you in a bit.
Thank you for the assessment Alan. Definitely supporting our original hypothesis. Originally lined... and trimmed brim.

I will say this.. it has very little snap to its brim if any. Now I know the binding is not supposed to effect the actual flange... but it does seem to effect tension... so after being trimmed less tension
 
Messages
15,083
Location
Buffalo, NY
Thank you for the assessment Alan. Definitely supporting our original hypothesis. Originally lined... and trimmed brim.

I will say this.. it has very little snap to its brim if any. Now I know the binding is not supposed to effect the actual flange... but it does seem to effect tension... so after being trimmed less tension

Yes, a deep brim cut will serve to undermine the original flange intention.

Here is a quick summary from a few hats I have owned. At first introduction, the Stratoliner was an unlined lightweight hat. I am not sure which of the three I've owned is the earliest, but all date somewhere around the introduction of the model at the start of WWII. They all have LOTXXXX imprints behind the sweatband:

earlystrat9.jpg


... are unlined, unreeded and show one of the two early sweatband imprints. Size label, if present, is the gold version.

vitastrat5.jpg


earlystrat5.jpg


earlystrat6.jpg


The block is stamped on either the last of the three panel manufacturing labels or the first of the single panel labels:

oldstrat5.jpg
vitastrat8.jpg

The Premier Quality Stratoliner I own is a little later (mid-1940s) and similar in construction but with better/heavier felt and a silkscreened imprint on the crown. The LOTXXXX imprint and gold size tag are no longer present.

premierstrat.jpg


Here is a Royal Stetson Stratoliner that I once owned, a decade or so later than the examples posted above. From the soft sweatband with deep imprint, I suspect the Royal you've acquired is earlier than this one.

strat3.jpg
 
Last edited:
Messages
19,001
Location
Central California
OK I managed to answer part of my Own question when I saw this old unlined Strat today. Seems they used a sticker badge on the felt In this case. So it is possible mine could have been unlined originally and sticker fell off over time. Now leaves the question if there were any Old strats without edge binding.

View attachment 255607 View attachment 255608


I don’t “know” anything about the lack of binding, but to me that’s one of the defining elements of a Stratoliner. It’s sort of like the OR in that regard. The short brim looks good on you.
 
Messages
11,716
Yes, a deep brim cut will serve to undermine the original flange intention.

Here is a quick summary from a few hats I have owned. At first introduction, the Stratoliner was an unlined lightweight hat. I am not sure which of the three I've owned is the earliest, but all date somewhere around the introduction of the model at the start of WWII. They all have LOTXXXX imprints behind the sweatband:

View attachment 255711

... are unlined, unreeded and show one of the two early sweatband imprints. Size label, if present, is the gold version.

View attachment 255712

View attachment 255713

View attachment 255718

The block is stamped on either the last of the three panel manufacturing labels or the first of the single panel labels:

View attachment 255714 View attachment 255715
The Premier Quality Stratoliner I own is a little later (mid-1940s) and similar in construction but with better/heavier felt and a silkscreened imprint on the crown. The LOTXXXX imprint and gold size tag are no longer present.

View attachment 255716

Here is a Royal Stetson Stratoliner that I once owned, a decade or so later than the examples posted above. From the soft sweatband with deep imprint, I suspect the Royal you've acquired is earlier than this one.

View attachment 255717
Thank you for the expose Alan. I just double checked the sweat. No LotXXXX. Just a hand written 3X and the same number from reorder tag stamped. Also looks like it was same block as two you have there 122

9BE8ADD8-9CD0-498D-B625-7F71CA73FCC1.jpeg
 
Messages
11,716
I don’t “know” anything about the lack of binding, but to me that’s one of the defining elements of a Stratoliner. It’s sort of like the OR in that regard. The short brim looks good on you.
Thanks Brent. I agree with you on those elements. After a few had suggested otherwise I was curious to see if any had seen any without binding. Like for example. The elements of the OR as we know... however the original being a wider ribbon.

I def love the way this one looks as is... though it won’t deter me from picking up just the right full brimmed Strat when it comes along.
 

petef

New in Town
Messages
1
Hi
I have a question about a hat type identification. It is from a video (sorry). the link here should take you to the video in question (skip to 5:18). In particular, I would like to know what type of hat the keyboardist is wearing.
(he is in the white suit)

It looks similar to the type Stevie Ray Vaughan used to wear, but I don't really know what that type is called either.

Cheers
Pete
 

Just A Hat Rack

Practically Family
Messages
619
Location
Buckeye Nation
Hi
I have a question about a hat type identification. It is from a video (sorry). the link here should take you to the video in question (skip to 5:18). In particular, I would like to know what type of hat the keyboardist is wearing.
(he is in the white suit)

It looks similar to the type Stevie Ray Vaughan used to wear, but I don't really know what that type is called either.

Cheers
Pete
To me it looks like an open crown western.
 
Messages
19,001
Location
Central California
If I had a photo I wouldn't have to ask what one looked like. Have seen 2 or 3 references in stories written in the 1920s or a bit earlier to a man wearing a Christie hat but no description or helpful context.


How about a photo or link of where they were mentioned? That’s what I was asking for.

It could have been a localized term, and misquote, or??? Some context on where you came across this name would be helpful.
 

Yahoody

One Too Many
Messages
1,112
Location
Great Basin
Looking for a 1950's Stetson or Resistol ad showing a kid with his parents getting a new hat in a Western store? I think I saw it here recently. Anyone have the link? Thanks!
 

Lotsahats

One Too Many
Messages
1,370
Hey, all, I know I'm not around much anymore. I recently had a brainwave--and maybe you've already thought of this--but I thought I would share. I was driving in Philly when I noticed a fur shop, and I asked if they clean men's fur felt hats. Not only do they clean 'em, they even have hat blocks and flanges. I dunno why I never thought to check with a furrier for local hat services, but I thought I would suggest it: if you don't have a hat shop in town, look for a fur shop!

A
 

Forum statistics

Threads
109,292
Messages
3,078,096
Members
54,244
Latest member
seeldoger47
Top