Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

ALL ORIGINAL Irvin RAF type Jackets - Loving that Wolf in sheeps' clothing!

aswatland

My Mail is Forwarded Here
Messages
3,338
Location
Kent, England
Up-dated pictures of 1940 DGL Irvin.

I have owned this very rare jacket by the small London maker, DGL for around 7 years. It's currently up for sale so as a record here are some decent photos. It has all the features typical of this maker:-large collar rings, very narrow belt loops, an almost square ended collar and large rivets to secure the main zip. Originals from this maker are exceptionally rare especially in a desirable two panel construction in a decent size.

018-2.jpg

019-4.jpg

021-3.jpg

026-3.jpg

029-2.jpg

022-3.jpg

038-2.jpg

041-1.jpg

033-3.jpg
 

alsendk

A-List Customer
Messages
427
Location
Zealand Denmark
I am wondering who came first with the idea of equipping their pilots with sheep skin flying jackets.....USAAF or RAF.

So far I have found out (I believe), that Irvin started his factory in England around 26` by request from the air ministry of RAF.

But I wonder when - and what made USA start their production. Did they start earlier ? and was it a coinsidence that both the Irvin and the B3 looked almost the same ?

untitled-14.jpg
[/IMG]
 
Last edited:

aswatland

My Mail is Forwarded Here
Messages
3,338
Location
Kent, England
Heavy fur-lined flying suits were worn in the First World War and in the 1920s. Sheepskin was first used for an entire jacket and trousers in 1931 when the USAC B-1 Jacket and A-1 trousers were developed by the American Leslie Irvin. Around the same time he developed the British Irvin suit, which was made in his Letchworth factory. His 1932 British patent depicts a jacket and trouser combination which looks more like a B-1/A-1 than an Irvin suit. The USAC placed orders for B-1 jackets in late 1931 (1932 fiscal year).

The B-3 jacket and A-3 trousers date to 1934. The B-3 jacket is very different in appearance from the Irvin jacket and is quite a boxy jacket. As far as I can determine early Irvin jackets were used by civilian pilots until the British Air Ministry placed its first order for them in 1935 under contract 471922/35. The very earliest Irvins were either two or four panel jackets and only had the patent number on the label: 407405/32.

On page 74 of this thread are pictures of my mint 1933 IAC jacket which is a four panel jacket and does not have the breast pocket as found on the B-1.

http://www.thefedoralounge.com/show...s-Loving-that-Wolf-in-sheeps-clothing!/page74
 
Last edited:

alsendk

A-List Customer
Messages
427
Location
Zealand Denmark
You know your stuff Andrew. Thank you for educating me.

I actually didn`t know that Irvin was the designer for the American jackets also.

Now I Wonder why he didn`t make them alike......but it probably had to do with different wishes between RAF and USAAF ?

What a lovely jacket your 1933 model are!
 

Sloan1874

I'll Lock Up
Messages
8,427
Location
Glasgow
Do you rotate which ones you wear, Andrew? Or are there ones which you know are warmer than others in terms of fleece thickness.
 

alsendk

A-List Customer
Messages
427
Location
Zealand Denmark
R.A.F. Irvin Flying Coat - Full Length


Extremely rare original full length Irvin. Looks just like a standard jacket down to the belt but has a lower 'skirt' area with Irvin trouser style patch pockets to the front. However, do not be mislead into thinking this is an extended or modified jacket. There are no seams at waist level and the coat has clearly and deliberately made like this and with a full length front zip.
It physically measures approx. 46” so should be OK for around a 42” chest. The length of the coat is approx. 40" from the collar seam to the hem or 47" including the upright collar. The leather is generally in good condition retaining much of the original chromed finish. It has the usual wear and tear associated with most Irvin jackets and although a little dry to the touch it retains reasonably good flexibility. When we obtained the coat some of the leather seam bindings had been covered with newer wider pieces. These have been carefully removed and the original leather restitched. This does mean that there are stitch holes adjacent to the original bindings in places (see photos). There is also a small stitched repair to the back of the jacket and another small patch on the left cuff. The short dense fur lining has a few small areas of moulting here and there but nothing serious and is good overall. It retains original brass 'D-o-T' zips, the main complete with leather pull tag. Also complete with original belt, chain hanger, collar strap and rings plus eyelets to the rear of the collar for the elastic 'collar strap' (not present). No label nor any evidence of one. Almost certainly of late 1930s vintage this is a good example of the rare Irvin coat. It is the only example we have ever had but do know of two others that were found many years ago. Probably the only opportunity you will have to own one of these. Please view the additional photos listed separately for a clearer indication of condition

864.jpg
[/IMG]

I do not believe that I have seen an Irvin like this before here at ALL ORIGINAL Irvin RAF type Jackets
 

aswatland

My Mail is Forwarded Here
Messages
3,338
Location
Kent, England
I notice you have lifted the description from the seller's blurb. The jacket was made by Irvin Air Chute and would date to 1938-9 IMO. If it was made like this in the factory then it must have been a special order.
 

alsendk

A-List Customer
Messages
427
Location
Zealand Denmark
I notice you have lifted the description from the seller's blurb. The jacket was made by Irvin Air Chute and would date to 1938-9 IMO. If it was made like this in the factory then it must have been a special order.

You`re right Andrew, it wasn`t my description of this jacket. I stumbled over a very special site I haven`t seen before, with a lot of interesting memorabilia, including lots of Irvin jackets.
here`s the link. Probably most of you know this place already I guess....or?



http://www.historicflyingclothing.com/archive.php
 
Last edited:

BP1

New in Town
Messages
11
Location
United Kingdom
Irvin advice...

Hi All,

I've recently bought a multi-panel Irvin (as a Christmas present to myself!); it's in pretty good condition, but will need a few little jobs doing; a new sleeve zip slider and a bit of seam tape sewing (with maybe a collar retrim too). I was going to try the sewing myself; can anyone advise me what thread I should get hold of?
The sleeve zippers both look original to the jacket, and the remaining one is an unmarked single trunion brass item, with a diamond shape hole in the puller. I've looked back over the thread, but can't see anything similar. If I can find an identical puller and slider, is it fairly simple to fit them back on to the track?

I'll try to upload some pics shortly.

Brian
 

aswatland

My Mail is Forwarded Here
Messages
3,338
Location
Kent, England
Nice late War jacket Brian. It was made by Links from recycled Irvin trousers between 1943 and 1945. The unusual sleeve zip pull is not a factory fitted item, but a later addition as the cast AM "N" sliders which were often fitted on these jackets tended to break. As to thread you may be able to buy original wartime cotton thread on Ebay.
 

Forum statistics

Threads
109,325
Messages
3,078,945
Members
54,243
Latest member
seeldoger47
Top