Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Akubra Hats

Messages
18,221
it's a different hat, glad mine is the old one but might have to get this one.
I agree with what Bob said above, I don't believe this is a production change. It was either a special order/request or made from parts on the line at the time. Maybe a prototype. It's only a few months old & all the paperwork is supposed to be inside the original box when it gets here next wk.
 

johnnycanuck

My Mail is Forwarded Here
Messages
3,008
Location
Alberta
Anyone know if they have changed from ribbons to two cords on recent production CD's or is it a "run what you brung" type deal? My most recent MSCD still has the flat ribbon.

IMG_2140.jpg


IMG_2145.jpg
Where did you get this hat?
Johnny
 

johnnycanuck

My Mail is Forwarded Here
Messages
3,008
Location
Alberta
eBay. The tracker still shows Tues but it arrived at a sort facility in the area overnight. So I'm hoping it will be out for delivery tomorrow.
That does not look like a Campdraft at all....... Wonder if it was just modified or maybe its ones of those counterfeit ones Akubra has been talking about. Does it have the crest on the sweatband? Logo in the crown? Let us know more about it when its arrives.
Johnny
 

Bob Roberts

I'll Lock Up
Messages
11,201
Location
milford ct
No I didn't say that. It might help if I knew the original dealer. I'm thinking it might have been an outback type model & got the CD sweat. It's in the original box with papers inside. I'm not worried about it being a counterfeit. I'll know more this afternoon.
To me it's really a matter of curiosity more then anything else. The manufacturer should kno for sure if it was made by Akubra.
 
Messages
18,221
Here's what I know so far: I'll start out with the specs as I measure them: 2-3/4" raw edge brim x 5-1/2" open crown with no taper (same as a CD). The brim has no flange giving the appearance of a slightly different block from the regular CD, it may actually be straighter. This is the Imperial grade felt but I will say both the crown & the brim are the softest of the other 6 Imperials & 1 Heritage felts I own.

IMG_2226.jpg


IMG_2225.jpg


IMG_2224.jpg


IMG_2223.jpg


Maybe it's the difference/lack of a flange that makes the block look slightly different from other CD's? I think it may actually be straighter.

IMG_2227.jpg


IMG_2229.jpg



IMG_2230.jpg


IMG_2231.jpg


The two cord ribbon wasn't even tacked down. It was just laying there loose so I easily removed it.

IMG_2232.jpg



IMG_2233.jpg


In a matter of minutes I took it back to open crown, then tried a diamond crease, center crease & teardrop crease by hand & without steam. Then back to open crown again. So it should crease easily & hopefully set with some steam.

IMG_2234.jpg


IMG_2235.jpg


IMG_2236.jpg


I bought the hat off eBay from a seller in KY. According to documentation in the box including a business card the hat was originally sold from The Panama Hat Company in St. Augustine, FL. It arrived in an unmarked hat box which is probably a PHC box. They're not listed as an Akubra dealer. I have a call in for Tony Lippi now.

IMG_2238.jpg
 
Last edited:

Benzadmiral

Call Me a Cab
Messages
2,815
Location
The Swamp
. . .

Maybe it's the difference/lack of a flange that makes the block look slightly different from other CD's? I think it may actually be straighter.

IMG_2227.jpg


IMG_2229.jpg

It's got a kind of "U.S. Cavalry commander on the Arizona frontier" look to it here. You'd just need the little decorations, the twin plugs or whatever they're called, on the front brim.
 

Willebe

A-List Customer
Messages
479
Location
Kentucky
Here's what I know so far: I'll start out with the specs as I measure them: 2-3/4" raw edge brim x 5-1/2" open crown with no taper (same as a CD). The brim has no flange giving the appearance of a slightly different block from the regular CD, it may actually be straighter. This is the Imperial grade felt but I will say both the crown & the brim are the softest of the other 6 Imperials & 1 Heritage felts I own.

IMG_2226.jpg


IMG_2225.jpg


IMG_2224.jpg


IMG_2223.jpg


Maybe it's the difference/lack of a flange that makes the block look slightly different from other CD's? I think it may actually be straighter.

IMG_2227.jpg


IMG_2229.jpg



IMG_2230.jpg


IMG_2231.jpg


The two cord ribbon wasn't even tacked down. It was just laying there loose so I easily removed it.

IMG_2232.jpg



IMG_2233.jpg


In a matter of minutes I took it back to open crown, then tried a diamond crease, center crease & teardrop crease by hand & without steam. Then back to open crown again. So it should crease easily & hopefully set with some steam.

IMG_2234.jpg


IMG_2235.jpg


IMG_2236.jpg


I bought the hat off eBay from a seller in KY. According to documentation in the box including a business card the hat was originally sold from The Panama Hat Company in St. Augustine, FL. It arrived in an unmarked hat box which is probably a PHC box. They're not listed as an Akubra dealer. I have a call in for Tony Lippi now.

IMG_2238.jpg
It looks like someone was trying to copy the Stetson Gun Club Dune. I thought the hat looked familiar as I was looking at the Stetson Gun Club hats a couple weeks ago. It is a nice looking CD.

http://www.stetson.com/store/dune.html?color=silverbelly

Sent from my Nexus 5X using Tapatalk
 
Messages
18,221
Messages
10,524
Location
DnD Ranch, Cherokee County, GA
It looks like someone was trying to copy the Stetson Gun Club Dune. I thought the hat looked familiar as I was looking at the Stetson Gun Club hats a couple weeks ago. It is a nice looking CD.

http://www.stetson.com/store/dune.html?color=silverbelly

Sent from my Nexus 5X using Tapatalk
I have a vintage Stetson 25 Corral that looks just like this CD, raw edge, 2 ply ribbon with the body of an Open Road. It is the spittin' image of this CD. A Dune has a bound edge.
 
Messages
18,221
I have a vintage Stetson 25 Corral that looks just like this CD, raw edge, 2 ply ribbon with the body of an Open Road. It is the spittin' image of this CD. A Dune has a bound edge.
Do you think these hats could go back to the time when Akubra made the OR under contract for Stetson? I'm not sure how long ago that was, if you know? My hat is like new but could have been in the box for yrs. I didn't get much info by calling The Panama Hat Company or Tony Lippi. Instead of returning my call himself he had the same employee who had taken my original inquiry return my call. All she could tell me was PHC no longer has any association with Akubra & referred me to David Morgan. PHC does sell Stetson. When I asked her how long ago they sold Akubra hats all she could tell me was longer than two yrs ago, so I assume she really didn't know. She has probably only worked there two yrs.


Even if it doesn't pertain to this CD I would like to know more about that period when Akubra contracted with Stetson if you have any further info? If David Morgan is the historical authoritarian on Akubra then maybe someone could interview him? That would be interesting.
 
Messages
18,221
Soon to be coming back from Scott:

IMG_8483.jpg


Before:
IMG_2227.jpg


I'm really liking the block of this CD. If anyone knows Tony Lippi or David Morgan personally, an interview with either concerning the period of time Akubra was making the OR under contract for Stetson, & what was to follow would be most interesting.
 
Messages
18,221
Found this interesting 2 page thread on the Stetson Open Roads made by Akubra prior to the Campdraft, started by Jimmy the Lid in 2010. Marked as such they are pretty rare hats now.

http://www.thefedoralounge.com/threads/stetson-akubra-open-road.52809/

On a side note has anyone read the book, The Akubra Hat by Jill Bowen? Only 76 pages, is it worth it to source one? Looking specifically for more info on the contracted OR/CD.

IMG_2442.jpg
 

Forum statistics

Threads
109,294
Messages
3,078,164
Members
54,244
Latest member
seeldoger47
Top