Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Aero Cafe Racer - Opinions!

nevadapd

Familiar Face
Messages
67
Location
Ohio, USA
I have Aero's steerhide CR, much like Griff's before it was modded. It is tan but was "aged" by Aero, and IMO they did a wonderful job on that. I have owned (& still own) old leather jackets and the artificial aging looks pretty convincing to me although I realize it may be sacrilegious to some. Also, I have the satin lining and my only concern is that the satin runs down to the edge of the cuffs and is now sticking out beyond the end of the sleeve just a little. In retrospect, I should have requested an inch or so of leather inside the cuff to prevent that problem.
 

olworthers

A-List Customer
Messages
485
Location
UK
I have Aero's steerhide CR, much like Griff's before it was modded. It is tan but was "aged" by Aero, and IMO they did a wonderful job on that. I have owned (& still own) old leather jackets and the artificial aging looks pretty convincing to me although I realize it may be sacrilegious to some. Also, I have the satin lining and my only concern is that the satin runs down to the edge of the cuffs and is now sticking out beyond the end of the sleeve just a little. In retrospect, I should have requested an inch or so of leather inside the cuff to prevent that problem.

I've noticed a few people have had this issue with the sleeves - I'll ask Amanda about it when I place my order. Cheers!
 

olworthers

A-List Customer
Messages
485
Location
UK
Ok I think I've got my final spec, big thanks to everyone who's given me feedback, this forum is a great place, only made possible by the great people!

Specs - Aero Cafe Racer

Brown
Heavy FQ Horsehide
Dirt rider style collar
Black Cotton Drill lining
Half length bi-swing back
2 G-1 style pockets in lining, snap closure
Inch + of leather inside the sleeve ends
Extra length on the sleeves


Any final thoughts before I 'pull the trigger'?!

-OW
 

GriffDeLaGriff

One Too Many
Messages
1,203
Location
Sweden
I think the smaller biswing is called "shoulder bi-swing" or "bikers-bi-swing" just so it cant be misinterpreted.

Also, I cant see any specs of how many outside pockets you want.

And I think its wise to tell them exactly how much + you want in the arms?

And you might want to specify what hardware - nickel, shiny or "aged" brass.
 

olworthers

A-List Customer
Messages
485
Location
UK
Griff - thank you, that's very helpful.

Yes - going for 4 outside pockets. I'll give Amanda my arm length and explain I want 1 inch adding. And I think I'll go for the shiny brass and let it age as the rest of the jacket breaks in.

Thanks again!
 

Doublegun

Practically Family
Messages
773
Location
Michigan
Ok I think I've got my final spec, big thanks to everyone who's given me feedback, this forum is a great place, only made possible by the great people!

Specs - Aero Cafe Racer

Brown
Heavy FQ Horsehide
Dirt rider style collar
Black Cotton Drill lining
Half length bi-swing back
2 G-1 style pockets in lining, snap closure
Inch + of leather inside the sleeve ends
Extra length on the sleeves


Any final thoughts before I 'pull the trigger'?!

-OW

What is a "dirt rider" style collar?

Thanks,

JDG
 

olworthers

A-List Customer
Messages
485
Location
UK
Ok so I've placed my order, Amanda is excellent - very helpful!

Now it's time for the long wait....! Photos and review to follow....

Many thanks for all the Info and advice guys!


-OW
 

ChristianM.

New in Town
Messages
38
Location
Germany
What was Amanda saying about the "dirtrider" collar? Are they making it for you? Are you going for the same collar height as in the picture (pretty high!).
 

olworthers

A-List Customer
Messages
485
Location
UK
Yep, they're making the "dirtrider" collar. I wanted it higher, that was the only thing that I wasn't sure about with the cafe racer style!
 

Doublegun

Practically Family
Messages
773
Location
Michigan
Doublegun, check out the half length biswing back, which is just behind the shoulder area and not all the way down to the kidney panel. It's a good middle ground if you don't want to go to fully plain back (which is also a good option, have a look at GriffDeLaGriff's CR which he had changed from biswing to plain).
I went with the shoulder only bi-swing as I felt the full biswing back was a bit much and not functionally necessary for me, and I think it gives the bit of extra room when driving or crossing your arms etc, but still looks quite smooth from behind.
As for the leathers, you could always ask Amanda to send you some samples?

Can anyone tell me if the "Bikers" back or "Half-length" back give you enough freedom to ride a bike or drive a car comfortably?

Thanks.
 

Mojo1975

Sponsoring Affiliate
Messages
321
Location
Seattle, WA
Can anyone tell me if the "Bikers" back or "Half-length" back give you enough freedom to ride a bike or drive a car comfortably?

Thanks.

I think we, at Insurrection, were the first to develop this Aero back style with Will at Aero. We worked with Will with the pattern off of a 1960s Bates jacket.

Yes, you do have quite a bit of freedom and you will be able to ride your bike or drive your car in a comfortable manner.
 
Last edited:

Doublegun

Practically Family
Messages
773
Location
Michigan
I think we, at Insurrection, were the first to develop this Aero back style with Will at Aero. We worked with Will with the pattern off of a 1960s Bates jacket.

Yes, you do have quite a bit of freedom and you will be able to ride your bike or drive your car in a comfortable manner.

Thanks. So the back will look like the back on the Insurrection Aero Cafe jacket?

Thanks again,

JDG
 

Mojo1975

Sponsoring Affiliate
Messages
321
Location
Seattle, WA
Thanks. So the back will look like the back on the Insurrection Aero Cafe jacket?

Thanks again,

JDG

Exactly!

A customer of ours took this today with his camera phone and emailed it to us...

Just one "T" rack, and over $10,000 USD in beautiful Horween horsehide!!!

More Aero FQHH jackets arrive on Monday!!!

Aerorack.jpg
 

CeeDee

New in Town
Messages
36
Location
Renton, WA
Can anyone tell me if the "Bikers" back or "Half-length" back give you enough freedom to ride a bike or drive a car comfortably?

Thanks.

You'll definitely have enough room, as long as the jacket is sized properly. Not too big and not too small.

Exactly!

A customer of ours took this today with his camera phone and emailed it to us...

Just one "T" rack, and over $10,000 USD in beautiful Horween horsehide!!!

More Aero FQHH jackets arrive on Monday!!!

Aerorack.jpg

This is such an awesome photo! It reminds me of what those in the 1940s and 1950s were lucky enough to choose from for their outerwear!
 

Gancho

One of the Regulars
Messages
242
Location
Hamburg, Germany
Hello, here you can see another interpretation of the bi swing back. it is between the biker´s back and the full swing back. I asked for a higher kidney panel, so the swing back gets smaller. I will post a thread about the jacket soon.

7526371120_5566e862ec_z.jpg
 

Cole

One of the Regulars
Messages
173
Location
Germany
Hello, here you can see another interpretation of the bi swing back. it is between the biker´s back and the full swing back. I asked for a higher kidney panel, so the swing back gets smaller. I will post a thread about the jacket soon.

7526371120_5566e862ec_z.jpg

Oh, I'm looking forward to that. Looks very promising from the back. :)
 

Gancho

One of the Regulars
Messages
242
Location
Hamburg, Germany
Thanks Cole,

you will be surprised. This cafe racer is complete different.

i like the big swing back a lot, but for me the kidney panel was not high enough.

cheers olli
 

Forum statistics

Threads
109,130
Messages
3,074,681
Members
54,104
Latest member
joejosephlo
Top