Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Aero 1930's HB and Premier Highwayman

Harris HTM

One Too Many
Messages
1,890
Location
In the Depths of R'lyeh
Hello everybody.
I've been watching this forum for years but it is actually my first post. I do have a question regarding the sizing of Aero 1930's Half Belt and the Premier Highwayman.
My chest measures 40.25'' and my belly 38.125''.
I contacted Aero and they advised size 40 for both styles.
Just for the verification:
I do own two schott perfecto's 618HH, size 38 and size 40. The 38 sits perfect on the chest but is rather tight on the belly while the 40 has a comfortable fit.
Does anyone have any experience on the two aero jackets?
I'm planning to order soon so any recommendations are always welcome.
Thanks in advance guys and long live horsehide.
 

dan_t

Practically Family
Messages
950
Location
Sydney, Australia
Firstly, welcome!
As you seem to be located in the Netherlands, Thurstons fit jacket program may, or may not be an option. It could be worth reaching out to Carrie just to see.

Otherwise, you can't go too far wrong listening to Aero's advice - they do know their products better than anyone else!
 

Harris HTM

One Too Many
Messages
1,890
Location
In the Depths of R'lyeh
Thanks Dan.
I guess a fit jacket from the US is not an option, regarding shipping and probably taxing costs. I trust the Aero advice, the jackets I got from them in the past fit fine.
 

jacketjunkie

Call Me a Cab
Messages
2,323
Location
Germany
Welcome to the Lounge!

The Premier Pattern are very trim fitting, with narrow shoulders and high armholes. High armholes are good which is why I would pick premier fit over regular pattern, but a size 40 probably has like 17.5-18" shoulders and is accordingly trim through the body. I have a 40.5" chest and I prefer 19-20" shoulders and a relaxed fit, so I would go for a 42, but that's down to personal taste and preferences.

edit; I think Pawineguy owns a premier HWM?
 

Harris HTM

One Too Many
Messages
1,890
Location
In the Depths of R'lyeh
Hi jacketjunkie, thanks for your reply!
Judging by my other Aero and Schott jackets I think that the optimal cross-shoulder width for me is indeed 17.5''-18.25''. A bigger shoulder width for me makes the jacket look oversized, but this indeed lies on the eye of the beholder.
 

rmconner80

Familiar Face
Messages
65
Location
Clifton VA
My advice, which I posted elsewhere:

You will find a less room in the Premier Highwayman than in a 30s Halfbelt of the exact same tag size. The 30s Halfbelt is slim, but the Premier is an even closer fitting jacket.

That said - I have a 42" chest and wear a size 38 Premier Highwayman! It's tight! But that's what I wanted. I have a separate jacket in the works to accommodate a warmer lining and layering a sweater. If I were to do it again, I'd get a size 40 in the Premier Highwayman. But based on how a size 40 test jacket (30s Halfbelt) fit me, I would never have known to get a size 40.

Depending how you like your jackets to fit, and whether you want to layer, it sounds like either a 40 or a 42 will work for you. Like you said, it's probably down to shoulder size.
 

Harris HTM

One Too Many
Messages
1,890
Location
In the Depths of R'lyeh
My advice, which I posted elsewhere:

You will find a less room in the Premier Highwayman than in a 30s Halfbelt of the exact same tag size. The 30s Halfbelt is slim, but the Premier is an even closer fitting jacket.

That said - I have a 42" chest and wear a size 38 Premier Highwayman! It's tight! But that's what I wanted. I have a separate jacket in the works to accommodate a warmer lining and layering a sweater. If I were to do it again, I'd get a size 40 in the Premier Highwayman. But based on how a size 40 test jacket (30s Halfbelt) fit me, I would never have known to get a size 40.

Depending how you like your jackets to fit, and whether you want to layer, it sounds like either a 40 or a 42 will work for you. Like you said, it's probably down to shoulder size.

Thanks for your reply.
What I really try to avoid is for the jacket to be really tight around my (beer-)belly, which may be the case with the 40 premier, OR for the jacket to be really loose on the shoulders/chest, which, if I get it well, might be the case with the 40 HB. Hmmm.
 

jacketjunkie

Call Me a Cab
Messages
2,323
Location
Germany
http://aeroleatherclothing.com/product-detail.php?id=2839

You can see the measurements for a 40 Premier HWM here.
Pit to pit 20.75"
Shoulders 17.25"

Pit to pit 20.75 means that the jacket has a factual chest width of less than 41" (p2p is measured outside). If you have a 40.5" chest and 38" belly, you won't be able to zip this up. Also 17.25" shoulders is very little.

Go for a 42 if it shall be the Premier HWM. (If deciding between HB and HWM, I would definitely go for the HWM, much more contemporary jacket which won't get you any strange looks, regardless of where you wear it)
 

Fanch

I'll Lock Up
Messages
4,490
Location
Texas
With ~40" chest and ~38" abdomen, there is only a 2" drop. I would be just as concerned with the lower torso fit as the upper with even a 30's half belt design, much less with a Premier. Your safest bet might be a regular HWM or 1950's half belt in size 40?
 

Harris HTM

One Too Many
Messages
1,890
Location
In the Depths of R'lyeh
With ~40" chest and ~38" abdomen, there is only a 2" drop. I would be just as concerned with the lower torso fit as the upper with even a 30's half belt design, much less with a Premier. Your safest bet might be a regular HWM or 1950's half belt in size 40?
Hi, thanks for replying.
I have tried a highwayman size 40 and a pioneer size 40 and they were huge for my taste. I recently came across a 50's HB size 38 which was ok with thick layering.
 

Cooperson

One Too Many
Messages
1,165
Location
Midlands UK
I'm not sure if this helps but I'm 5'11" with a 40" chest and 36" waist. My 40" Premier 1930's half belt is trim fitting and I can't layer with it, but it's still one of my favouite jackets.
 

Attachments

  • image.jpeg
    image.jpeg
    830.1 KB · Views: 4,822

Harris HTM

One Too Many
Messages
1,890
Location
In the Depths of R'lyeh
I'm not sure if this helps but I'm 5'11" with a 40" chest and 36" waist. My 40" Premier 1930's half belt is trim fitting and I can't layer with it, but it's still one of my favouite jackets.
Hi Cooperson! Thanks for the photo, your jacket looks great!
I guess the Premier Half Belt has a trimmer fit than the 30's HB. I think I will avoid the Premier Series and go for a normal 30's Half Belt.
 

Insomnia

One of the Regulars
Messages
211
Location
Germany
I would choose a size 40 1930 HB or a size 38 1950 HB.
Here my size 40 1930 HB
 

Attachments

  • 30HB Sz40.jpg
    30HB Sz40.jpg
    425.1 KB · Views: 1,840
Last edited:

Seb Lucas

I'll Lock Up
Messages
7,562
Location
Australia
Interesting - I have a 40 inch chest and 34 waist (185 pounds six two) I had a size 42 1930's half-belt but it was a tight fit I didn't enjoy - Thurston Bros recommended a 44 for me.
 
Messages
11,169
Location
SoCal
Keep in mind that the Premier cut is also referred to as the STF (super tight fit).
You can't go wrong with a well fitting standard 30s Half belt IMHO (Aero's best jacket :)...a classic)
 

Roma

A-List Customer
Messages
382
Location
Moscow
My Long half belt 44 fits very roomy with my chest being 43". On the other hand, my Cafe racer 44 fits pretty snug.
 

Forum statistics

Threads
109,313
Messages
3,078,679
Members
54,243
Latest member
seeldoger47
Top