Post New Hats Here!

[Blare]

Adam Executive - The E-VENT

Adam Executive - The E-VENT
Light Pecan Colored Ultra Light Felt
4 3/4 crown as shaped - about 5 1/2 open
Unlined and vented
2 5/8 brim with very short underwelt
Two rows of brim stitching
3/4 inch matching grosgrain ribbon
Box pleat/gills treatment

The latest arrival, which came off a hot tip from Brent @deadlyhandsome, is the Adam Executive - E-Vent. It was without a doubt the unusual ribbon styling with a decorative wind trolley button sewn on for good measure along with the cool vent pattern that caught my eye. But upon arrival there is so much more to love. This unlined felt is super soft and ultra thin. That sort of “blow a crease in it” kind of felt… but somehow incredibly obedient. The brim is 2 5/8 with a narrow underwelt and two rows of brim stitching. I couldn’t tell if the E-Vent sweat cooling system really worked… but it did FEEL like it was cooler.. may have been my imagination. It really is an Exquisite hat that fits absolutely perfectly. Thank you again Brent for thinking of me on this one.

 

[deadlyhandsome]

Adam Executive - The E-VENT
View attachment 368896

Adam Executive - The E-VENT
Light Pecan Colored Ultra Light Felt
4 3/4 crown as shaped - about 5 1/2 open
Unlined and vented
2 5/8 brim with very short underwelt
Two rows of brim stitching
3/4 inch matching grosgrain ribbon
Box pleat/gills treatment

The latest arrival, which came off a hot tip from Brent @deadlyhandsome, is the Adam Executive - E-Vent. It was without a doubt the unusual ribbon styling with a decorative wind trolley button sewn on for good measure along with the cool vent pattern that caught my eye. But upon arrival there is so much more to love. This unlined felt is super soft and ultra thin. That sort of “blow a crease in it” kind of felt… but somehow incredibly obedient. The brim is 2 5/8 with a narrow underwelt and two rows of brim stitching. I couldn’t tell if the E-Vent sweat cooling system really worked… but it did FEEL like it was cooler.. may have been my imagination. It really is an Exquisite hat that fits absolutely perfectly. Thank you again Brent for thinking of me on this one.

View attachment 368903 View attachment 368904 View attachment 368905
View attachment 368906 View attachment 368907 View attachment 368908 View attachment 368909 View attachment 368910 View attachment 368911

Super hat, Joe. I’m glad the rest of the hat lived up to the bow and vents!

 

[deadlyhandsome]

A secondhand custom homburg from Joe The Hatter Custom Hats, Harrisburg, PA. “Style Bilt Hats” “Supreme Individuality”. Equal to the nicest homburgs I’ve seen from Stetson, Borsalino, etc.

 

[Blare]

Super hat, Joe. I’m glad the rest of the hat lived up to the bow and vents!

Thank you I am really super happy with this one. If it weren’t for some other spectacular hats already en-route this one will keep my fancy for a while.

 

[Blare]

A secondhand custom homburg from Joe The Hatter Custom Hats, Harrisburg, PA. “Supreme Individuality”. Equal to the nicest homburgs I’ve seen from Stetson, Borsalino, etc.

View attachment 368935 View attachment 368936 View attachment 368937 View attachment 368938 View attachment 368939 View attachment 368940 View attachment 368941
View attachment 368942

Really nice Brent. Looks similar to the very light grey color one my Dobbs 15 hommie

 

[johng70]

my latest from Mike at Northwest Hats - Navy Homburg with burgundy ribbon

 

[belfastboy]

Adam Executive - The E-VENT
View attachment 368896

Adam Executive - The E-VENT
Light Pecan Colored Ultra Light Felt
4 3/4 crown as shaped - about 5 1/2 open
Unlined and vented
2 5/8 brim with very short underwelt
Two rows of brim stitching
3/4 inch matching grosgrain ribbon
Box pleat/gills treatment

The latest arrival, which came off a hot tip from Brent @deadlyhandsome, is the Adam Executive - E-Vent. It was without a doubt the unusual ribbon styling with a decorative wind trolley button sewn on for good measure along with the cool vent pattern that caught my eye. But upon arrival there is so much more to love. This unlined felt is super soft and ultra thin. That sort of “blow a crease in it” kind of felt… but somehow incredibly obedient. The brim is 2 5/8 with a narrow underwelt and two rows of brim stitching. I couldn’t tell if the E-Vent sweat cooling system really worked… but it did FEEL like it was cooler.. may have been my imagination. It really is an Exquisite hat that fits absolutely perfectly. Thank you again Brent for thinking of me on this one.

View attachment 368903 View attachment 368904 View attachment 368905
View attachment 368906 View attachment 368907 View attachment 368908 View attachment 368909 View attachment 368910 View attachment 368911

I love the mid ribbon shark's gill treatment.....a great version.

 

[Blare]

my latest from Mike at Northwest Hats - Navy Homburg with burgundy ribbon

Wow! What a hat!

 

[Blare]

I love the mid ribbon shark's gill treatment.....a great version.

Thanks Robert. Really loving this one.

 

[Dlaniger]

A secondhand custom homburg from Joe The Hatter Custom Hats, Harrisburg, PA. “Style Bilt Hats” “Supreme Individuality”. Equal to the nicest homburgs I’ve seen from Stetson, Borsalino, etc.

View attachment 368935 View attachment 368936 View attachment 368937 View attachment 368938 View attachment 368939 View attachment 368940 View attachment 368941
View attachment 368942

my latest from Mike at Northwest Hats - Navy Homburg with burgundy ribbon

Two great custom homburgs. The regal classic and the funky contemporary!

 

[Dlaniger]

Adam Executive - The E-VENT
View attachment 368896

Adam Executive - The E-VENT
Light Pecan Colored Ultra Light Felt
4 3/4 crown as shaped - about 5 1/2 open
Unlined and vented
2 5/8 brim with very short underwelt
Two rows of brim stitching
3/4 inch matching grosgrain ribbon
Box pleat/gills treatment

The latest arrival, which came off a hot tip from Brent @deadlyhandsome, is the Adam Executive - E-Vent. It was without a doubt the unusual ribbon styling with a decorative wind trolley button sewn on for good measure along with the cool vent pattern that caught my eye. But upon arrival there is so much more to love. This unlined felt is super soft and ultra thin. That sort of “blow a crease in it” kind of felt… but somehow incredibly obedient. The brim is 2 5/8 with a narrow underwelt and two rows of brim stitching. I couldn’t tell if the E-Vent sweat cooling system really worked… but it did FEEL like it was cooler.. may have been my imagination. It really is an Exquisite hat that fits absolutely perfectly. Thank you again Brent for thinking of me on this one.

View attachment 368903 View attachment 368904 View attachment 368905
View attachment 368906 View attachment 368907 View attachment 368908 View attachment 368909 View attachment 368910 View attachment 368911

Wonderful hat, Joe!

 

[Daniele Tanto]

Last hat taken from a Borsalino felt and worked by Fleur

The hat was originally for women and very large in proportions, bought in the USA.

It size was 57 cm a 7 in US, but the brims were wide that it could be reblock into a 59 1/2 which is my measurement

What deeply attracted me was the "Prussian Blue" color and the velour finish.

The transformation was done with a tone-on-tone ribbon and a hat shape with wide brim and a full-sized crown.

measurements are as follows: brims at 6.5 cm. keep the original hemming so the same color was used for the ribbon, it is 4.5cm high and the crown at its lowest point is 11cm.

The operation was very successful despite the enlarged size and the "resistance" of the Borsalino felts in losing the original imprint

 

[Pellie]

Fleur does a great job. Nice hat.

 

[Blare]

Wonderful hat, Joe!

Thank you Reggie

 

[Blare]

Last hat taken from a Borsalino felt and worked by Fleur
View attachment 369212
The hat was originally for women and very large in proportions, bought in the USA.
View attachment 369213
It size was 57 cm a 7 in US, but the brims were wide that it could be reblock into a 59 1/2 which is my measurement
View attachment 369214
What deeply attracted me was the "Prussian Blue" color and the velour finish.
View attachment 369215
The transformation was done with a tone-on-tone ribbon and a hat shape with wide brim and a full-sized crown.
View attachment 369216
measurements are as follows: brims at 6.5 cm. keep the original hemming so the same color was used for the ribbon, it is 4.5cm high and the crown at its lowest point is 11cm.
View attachment 369217
The operation was very successful despite the enlarged size and the "resistance" of the Borsalino felts in losing the original imprint

What a beautiful blue.

 

[Daniele Tanto]

Fleur does a great job. Nice hat.

Thanks Marcel. My investment, after collecting dozens of ready-to-use hats, is to work on antique felts for new hats. Up to now the projects put in place have given good results with the indispensable contribution of Fluer. Also add a bit of luck in finding excellent quality felt cones or disassembled hats. Marcel, I have a couple of interesting proposals for your collection. I'll send you something next week

What a beautiful blue

Thanks a lot Joe. Your Adam Executive is fantastic! One of those hats I will remember

 

[Blare]

Thanks Marcel. My investment, after collecting dozens of ready-to-use hats, is to work on antique felts for new hats. Up to now the projects put in place have given good results with the indispensable contribution of Fluer. Also add a bit of luck in finding excellent quality felt cones or disassembled hats. Marcel, I have a couple of interesting proposals for your collection. I'll send you something next week


Thanks a lot Joe. Your Adam Executive is fantastic! One of those hats I will remember

Thank you Daniele. It is headed out the door for day number three in a row with me. I’d say it’s definitely a quick favorite

 

[Pellie]

Thanks Marcel. My investment, after collecting dozens of ready-to-use hats, is to work on antique felts for new hats. Up to now the projects put in place have given good results with the indispensable contribution of Fluer. Also add a bit of luck in finding excellent quality felt cones or disassembled hats. Marcel, I have a couple of interesting proposals for your collection. I'll send you something next week


Thanks a lot Joe. Your Adam Executive is fantastic! One of those hats I will remember

Well...i'm very curious for your proposal now
And i'm also waiting on Fleur to have a hat of mine reblocked...
I don't think i will be dissapointed.

 

[alanfgag]

Adam Executive - The E-VENT
View attachment 368896

Adam Executive - The E-VENT
Light Pecan Colored Ultra Light Felt
4 3/4 crown as shaped - about 5 1/2 open
Unlined and vented
2 5/8 brim with very short underwelt
Two rows of brim stitching
3/4 inch matching grosgrain ribbon
Box pleat/gills treatment

The latest arrival, which came off a hot tip from Brent @deadlyhandsome, is the Adam Executive - E-Vent. It was without a doubt the unusual ribbon styling with a decorative wind trolley button sewn on for good measure along with the cool vent pattern that caught my eye. But upon arrival there is so much more to love. This unlined felt is super soft and ultra thin. That sort of “blow a crease in it” kind of felt… but somehow incredibly obedient. The brim is 2 5/8 with a narrow underwelt and two rows of brim stitching. I couldn’t tell if the E-Vent sweat cooling system really worked… but it did FEEL like it was cooler.. may have been my imagination. It really is an Exquisite hat that fits absolutely perfectly. Thank you again Brent for thinking of me on this one.

View attachment 368903 View attachment 368904 View attachment 368905
View attachment 368906 View attachment 368907 View attachment 368908 View attachment 368909 View attachment 368910 View attachment 368911

That is the nicest Adam hat I have seen. <ovation>

 

[Blare]

That is the nicest Adam hat I have seen. <ovation>

Wow. Thank you Alan. High praise indeed.