Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

What Hat Are You Wearing Today ?

Messages
20,249
Location
Nederland
Messages
20,249
Location
Nederland
Sunday and so it's time for the hats of the (mostly rainy) week. Had to choose my pics carefully.

Lincoln Bennett (still need some steaming to get the pinch and brim to line up)

IMG_1767_resize.jpeg


Fléchet (before it was off to Denmark)
IMG_1769_resize.jpeg


Rousselet
IMG_1773_resize.jpeg


Borsalino
IMG_1774_resize.jpeg


Peschel
IMG_1775_resize.jpeg


Wilke velour
IMG_1776_resize.jpeg


Brüder Böhm velour
IMG_1777_resize.jpeg
 

aslyfox

New in Town
Messages
21
Does anyone else name or identify their hats?
Continuing my series of nicknames for my headgear: Although living in the Midwest and never seeing the tide roll, I chose to follow my Dad's lead and invest in Canadian imports. I have two—"Heeeeere's Breezy!"

He is an original Canadian-made Tilley LTM8 ("Lighterweight Mesh Hat," stamped 0318 for March 2018) whose wraparound ventilated crown lets every bit of air flow straight through while that wide stitched brim keeps the sun off—especially on my second trip to Tanzania in 2019 and he shelters me to this day.

He also helps me predict "Stormy Weather." If the side of my head gets wet, it's raining and the wind is blowing.


Breezy doesn't have many relatives left—his nephew, the Airflo, is the better-known one these days. However, to me, Breezy still tops him, making him my favorite warm-weather companion whenever the heat rolls in.
 

Attachments

  • 20261114_045931.jpg
    20261114_045931.jpg
    1.4 MB · Views: 7
  • 20261122_053049.jpg
    20261122_053049.jpg
    1.5 MB · Views: 5
  • 20261122_070343(1).jpg
    20261122_070343(1).jpg
    1.7 MB · Views: 4
Last edited:

hambone71

One Too Many
Messages
1,037
Location
Roll Tide
I look forward to these cool, mild weather weekends to enjoy coffee out back with an old hat and reflect on it’s texture and construction. This is a 50s 3X with mode edge. Another one that lives deep in a pile, and shamefully, gets neglected. I need to make a point to reach for this one much more often, as I appreciate so much about it.
IMG_4088.jpeg
IMG_4087.jpeg
FullSizeRender.jpeg
IMG_4083.jpeg
IMG_4082.jpeg
 

hambone71

One Too Many
Messages
1,037
Location
Roll Tide
I don't know if you’re off or not. It doesn't have the requisite brim stitching. Not as soft as a P l a y b o y. It's a nice light hat, though. It was warm here yesterday, so I thought I'd take advantage.
Yessir! I noticed it was without the signature brim stitching but lots of other similarities to the PB. Good looking hat and looked perfect for a warmer Fall day!
 

hambone71

One Too Many
Messages
1,037
Location
Roll Tide
Continuing my series of nicknames for my headgear: Although living in the Midwest and never seeing the tide roll, I chose to follow my Dad's lead and invest in Canadian imports. I have two—"Heeeeere's Breezy!"

He is an original Canadian-made Tilley LTM8 ("Lighterweight Mesh Hat," stamped 0318 for March 2018) whose wraparound ventilated crown lets every bit of air flow straight through while that wide stitched brim keeps the sun off—especially on my second trip to Tanzania in 2019 and he shelters me to this day.

He also helps me predict "Stormy Weather." If the side of my head gets wet, it's raining and the wind is blowing.


Breezy doesn't have many relatives left—his nephew, the Airflo, is the better-known one these days. However, to me, Breezy still tops him, making him my favorite warm-weather companion whenever the heat rolls in.
When The Tide is rolling, it’s a sight to behold! Roll Tide Roll!
 
Mi
Welp, first time for everything lol - never heard of a dedicated Chex Mix run before lol - and only one ingredient! I believe I’d have to let that one go! Was it the rye bagel chips?

Mixed nuts actually. Chex Mix only happens around Thanksgiving for me and it needs to be perfect or I’ll catch h*ll from my oldest daughter.

The store is 30-minutes away to boot.
 

RickP

My Mail is Forwarded Here
Messages
3,144
Hadn't had this one out in a while....it's my other "goat chewed" brim. Decent little 3x Resistol. Had to take off about an inch off the brim to get the edge smooth again.....if you have goats do not leave a hat within reach!. Got it and another chewed Stetson Gus from a buddy who evidently didn't feed his livestock enough lol.Oh well it came out ok and had a good story. Have been intending to make up a nice leather hatband for it. I've got some nice lizard, but it's going to require patch working several pieces together to get one band... I'm thinking 1" brown lizard center with a black leather or grosgrain pipeing on top and bottom edge ( about 1-1/4 total).. hoping that will help blend a tall crown and reduced brim...should be a fun project
PXL_20261122_155937343.jpg
PXL_20261122_155942404.jpg
PXL_20261122_155957408.jpg
PXL_20261122_155952793.MP.jpg
PXL_20261122_160005078.jpg
 

hambone71

One Too Many
Messages
1,037
Location
Roll Tide
Hadn't had this one out in a while....it's my other "goat chewed" brim. Decent little 3x Resistol. Had to take off about an inch off the brim to get the edge smooth again.....if you have goats do not leave a hat within reach!. Got it and another chewed Stetson Gus from a buddy who evidently didn't feed his livestock enough lol.Oh well it came out ok and had a good story. Have been intending to make up a nice leather hatband for it. I've got some nice lizard, but it's going to require patch working several pieces together to get one band... I'm thinking 1" brown lizard center with a black leather or grosgrain pipeing on top and bottom edge ( about 1-1/4 total).. hoping that will help blend a tall crown and reduced brim...should be a fun project
View attachment 826529 View attachment 826530 View attachment 826531 View attachment 826532 View attachment 826533
Good save!
 

Judgmentalist

One Too Many
Messages
1,204
Hadn't had this one out in a while....it's my other "goat chewed" brim. Decent little 3x Resistol. Had to take off about an inch off the brim to get the edge smooth again.....if you have goats do not leave a hat within reach!. Got it and another chewed Stetson Gus from a buddy who evidently didn't feed his livestock enough lol.Oh well it came out ok and had a good story. Have been intending to make up a nice leather hatband for it. I've got some nice lizard, but it's going to require patch working several pieces together to get one band... I'm thinking 1" brown lizard center with a black leather or grosgrain pipeing on top and bottom edge ( about 1-1/4 total).. hoping that will help blend a tall crown and reduced brim...should be a fun project
View attachment 826529 View attachment 826530 View attachment 826531 View attachment 826532 View attachment 826533
What's the brim at now?
 

Forum statistics

Threads
115,931
Messages
3,201,720
Members
59,481
Latest member
Gmoney
Top