Want to buy or sell something? Check the classifieds
  • The Fedora Lounge is supported in part by commission earning affiliate links sitewide. Please support us by using them. You may learn more here.

Rockwater

A-List Customer
Messages
436
That’s a beauty!
And here’s an old standard from that period. A Royal Stetson, that arrived badly crushed in a extra small box, and of course too small in size. 2” brim, nice curl and snap, near mint.
Responded well to applied disciplines.

1A545B6B-80F1-4E23-9F6F-A79038709E42.jpeg
F3B5BE0B-7848-4B53-B265-F4E4127435CE.jpeg
C3438FF6-8EAF-443A-9824-7D832D83C21A.jpeg
 
Last edited:

Michael R.

Call Me a Cab
Messages
2,890
Location
West Tennessee USA
awesome Michael

those Knox Twenty hats are fantastic

That's a beaut.


Sent directly from my mind to yours.

Great! And in super condition, it looks. If my war chest had been a bit larger, I would have sprung for that one.

When you get a chance, please add it to the "Going Atomic With Dalton" thread.


Sent directly from my mind to yours.

Thanks Y'all . I'll do it Jim (if I can find the Thread)
 

moehawk

I'll Lock Up
Messages
5,911
Location
Northern California
Saw this on Etsy. A Dobbs West Twenty-Five Open Road clone in silverbelly, described as "distressed". It was cheap enough, and I didn't recall seeing one before (I'd seen the Westward, but not the West) so I thought I'd take a chance. It arrived Monday. Other than needing a really good cleaning and some reshaping, it's actually in pretty nice condition. It was in a deep cattlenan crease, abd probably had been ui's whole life. I got the crease itself out, but no amount if naptha was going to completely remove the dirt lines. I just resigned myself to living with them.

Here's a couple of pics.

7c37207fa6a5cac947c83e7c10bcfa02.jpg


0b733f5efd409b7f9ee1e74400e7bf80.jpg


Now, there wasn't a lot of damage to the hat, but there was a wind trolley I ended up removing. The button was scuffed and dirty, and looks as though at one point it had been jammed up against something to make it press the bow keeper into the crown long enough to make a depression, and push the reed of the sweatband inward on the other side.

646052ef56c5b8ff81d29785c77ac132.jpg
2958e0affd4754498dce04975869ad1f.jpg


Other than a couple of moth nips, that's the only damage I noted.
The insides and other fun stuff:

95c93e11f43aad17293dd2a7ece80e6a.jpg
3b3dffcebc99a65ce507d341822deb49.jpg


I always feel like I got a bonus when I see an embroidered liner logo.

f1018adae49fe338fc3d13a6f706f4c0.jpg


I like the zigzag piping. Thought it rather odd that they put the onionskin on the other side.

1ae6c0fa9d1ff65e844562326bc12bef.jpg


The remains of a factory tag. The condition of th e tag along with the fact that the liner was glued in with a very heavy hand (nearly all the way around) and a type of glue I've not seen used in hats plus the plastic sweat barrier behind the sweatband was glued to the felt and the liner glued over it tells me a previous owner had not wanted that liner to come out. I wish the tag hadn't been damaged.

80f9477eb1435887f0914b035f4c7d04.jpg


I picked out most of the glue, but you can see a line of it above the sticker and remains on the sweat barrier.

Some scrawling on the sweat

bd4445a0abae38f84448791260cd166b.jpg


Creased

d5426a7566290e989130e731afb07c24.jpg


And a head shot

bce15b6bb71f514a843bc4621de3943f.jpg


Everything about the hat is substantial. 5 1/2" crown, 2 5/8" brim. 185g weight. Thick leather sweat, heavyweight liner. OK, the ribbon is thin, but that's about it. The felt is dense and moldable, with a nice hand. I had to shim it down a little but hopefully it will conform down to my noggin with a little wear.
Date is a mystery. I'm going to say late 50's to early 60's, but as always input is welcomed!
Edit: I misread my scale. The weight is actually 155g. Still substantial, but not the 185g I originally posted. Oops!:)
Powered by happy thoughts
 
Last edited:
Messages
20,146
Location
Funkytown, USA
Saw this on Etsy. A Dobbs West Twenty-Five Open Road clone in silverbelly, described as "distressed". It was cheap enough, and I didn't recall seeing one before (I'd seen the Westward, but not the West) so I thought I'd take a chance. It arrived Monday. Other than needing a really good cleaning and some reshaping, it's actually in pretty nice condition. It was in a deep cattlenan crease, abd probably had been ui's whole life. I got the crease itself out, but no amount if naptha was going to completely remove the dirt lines. I just resigned myself to living with them.

Here's a couple of pics.

7c37207fa6a5cac947c83e7c10bcfa02.jpg


0b733f5efd409b7f9ee1e74400e7bf80.jpg


Now, there wasn't a lot of damage to the hat, but there was a wind trolley I ended up removing. The button was scuffed and dirty, and looks as though at one point it had been jammed up against something to make it press the bow keeper into the crown long enough to make a depression, and push the reed of the sweatband inward on the other side.

646052ef56c5b8ff81d29785c77ac132.jpg
2958e0affd4754498dce04975869ad1f.jpg


Other than a couple of moth nips, that's the only damage I noted.
The insides and other fun stuff:

95c93e11f43aad17293dd2a7ece80e6a.jpg
3b3dffcebc99a65ce507d341822deb49.jpg


I always feel like I got a bonus when I see an embroidered liner logo.

f1018adae49fe338fc3d13a6f706f4c0.jpg


I like the zigzag piping. Thought it rather odd that they put the onionskin on the other side.

1ae6c0fa9d1ff65e844562326bc12bef.jpg


The remains of a factory tag. The condition of th e tag along with the fact that the liner was glued in with a very heavy hand (nearly all the way around) and a type of glue I've not seen used in hats plus the plastic sweat barrier behind the sweatband was glued to the felt and the liner glued over it tells me a previous owner had not wanted that liner to come out. I wish the tag hadn't been damaged.

80f9477eb1435887f0914b035f4c7d04.jpg


I picked out most of the glue, but you can see a line of it above the sticker and remains on the sweat barrier.

Some scrawling on the sweat

bd4445a0abae38f84448791260cd166b.jpg


Creased

d5426a7566290e989130e731afb07c24.jpg


And a head shot

bce15b6bb71f514a843bc4621de3943f.jpg


Everything about the hat is substantial. 5 1/2" crown, 2 5/8" brim. 185g weight. Thick leather sweat, heavyweight liner. OK, the ribbon is thin, but that's about it. The felt is dense and moldable, with a nice hand. I had to shim it down a little but hopefully it will conform down to my noggin with a little wear.
Date is a mystery. I'm going to say late 50's to early 60's, but as always input is welcomed!

Powered by happy thoughts

Good pick up, moe. I haven't Etsy'd much lately. Need to get back there. I think your dating is on, but lean toward the later end of that.


Sent directly from my mind to yours.
 
Messages
19,694
Knox Twenty (50s) ...
That Twenty looks fantastic Michael. Looks like it has spent most of its life in the box. You need to make sure you get it out more!

A Dobbs West Twenty-Five Open Road clone in silverbelly
Certainly a very nice find Moe, & certainly a rare one! For that reason I would wear it with pride & not worry about the stains. Nice hat!
 

rclark

Call Me a Cab
Messages
2,282
Location
Central Texas
Saw this on Etsy. A Dobbs West Twenty-Five Open Road clone in silverbelly, described as "distressed". It was cheap enough, and I didn't recall seeing one before (I'd seen the Westward, but not the West) so I thought I'd take a chance. It arrived Monday. Other than needing a really good cleaning and some reshaping, it's actually in pretty nice condition. It was in a deep cattlenan crease, abd probably had been ui's whole life. I got the crease itself out, but no amount if naptha was going to completely remove the dirt lines. I just resigned myself to living with them.

Here's a couple of pics.

7c37207fa6a5cac947c83e7c10bcfa02.jpg


0b733f5efd409b7f9ee1e74400e7bf80.jpg


Now, there wasn't a lot of damage to the hat, but there was a wind trolley I ended up removing. The button was scuffed and dirty, and looks as though at one point it had been jammed up against something to make it press the bow keeper into the crown long enough to make a depression, and push the reed of the sweatband inward on the other side.

646052ef56c5b8ff81d29785c77ac132.jpg
2958e0affd4754498dce04975869ad1f.jpg


Other than a couple of moth nips, that's the only damage I noted.
The insides and other fun stuff:

95c93e11f43aad17293dd2a7ece80e6a.jpg
3b3dffcebc99a65ce507d341822deb49.jpg


I always feel like I got a bonus when I see an embroidered liner logo.

f1018adae49fe338fc3d13a6f706f4c0.jpg


I like the zigzag piping. Thought it rather odd that they put the onionskin on the other side.

1ae6c0fa9d1ff65e844562326bc12bef.jpg


The remains of a factory tag. The condition of th e tag along with the fact that the liner was glued in with a very heavy hand (nearly all the way around) and a type of glue I've not seen used in hats plus the plastic sweat barrier behind the sweatband was glued to the felt and the liner glued over it tells me a previous owner had not wanted that liner to come out. I wish the tag hadn't been damaged.

80f9477eb1435887f0914b035f4c7d04.jpg


I picked out most of the glue, but you can see a line of it above the sticker and remains on the sweat barrier.

Some scrawling on the sweat

bd4445a0abae38f84448791260cd166b.jpg


Creased

d5426a7566290e989130e731afb07c24.jpg


And a head shot

bce15b6bb71f514a843bc4621de3943f.jpg


Everything about the hat is substantial. 5 1/2" crown, 2 5/8" brim. 185g weight. Thick leather sweat, heavyweight liner. OK, the ribbon is thin, but that's about it. The felt is dense and moldable, with a nice hand. I had to shim it down a little but hopefully it will conform down to my noggin with a little wear.
Date is a mystery. I'm going to say late 50's to early 60's, but as always input is welcomed!

Powered by happy thoughts
Looks great Moe!
 
Messages
12,382
Location
Albany Oregon
Messages
12,382
Location
Albany Oregon
Saw this on Etsy. A Dobbs West Twenty-Five Open Road clone in silverbelly, described as "distressed". It was cheap enough, and I didn't recall seeing one before (I'd seen the Westward, but not the West) so I thought I'd take a chance. It arrived Monday. Other than needing a really good cleaning and some reshaping, it's actually in pretty nice condition. It was in a deep cattlenan crease, abd probably had been ui's whole life. I got the crease itself out, but no amount if naptha was going to completely remove the dirt lines. I just resigned myself to living with them.

Here's a couple of pics.

7c37207fa6a5cac947c83e7c10bcfa02.jpg


0b733f5efd409b7f9ee1e74400e7bf80.jpg


Now, there wasn't a lot of damage to the hat, but there was a wind trolley I ended up removing. The button was scuffed and dirty, and looks as though at one point it had been jammed up against something to make it press the bow keeper into the crown long enough to make a depression, and push the reed of the sweatband inward on the other side.

646052ef56c5b8ff81d29785c77ac132.jpg
2958e0affd4754498dce04975869ad1f.jpg


Other than a couple of moth nips, that's the only damage I noted.
The insides and other fun stuff:

95c93e11f43aad17293dd2a7ece80e6a.jpg
3b3dffcebc99a65ce507d341822deb49.jpg


I always feel like I got a bonus when I see an embroidered liner logo.

f1018adae49fe338fc3d13a6f706f4c0.jpg


I like the zigzag piping. Thought it rather odd that they put the onionskin on the other side.

1ae6c0fa9d1ff65e844562326bc12bef.jpg


The remains of a factory tag. The condition of th e tag along with the fact that the liner was glued in with a very heavy hand (nearly all the way around) and a type of glue I've not seen used in hats plus the plastic sweat barrier behind the sweatband was glued to the felt and the liner glued over it tells me a previous owner had not wanted that liner to come out. I wish the tag hadn't been damaged.

80f9477eb1435887f0914b035f4c7d04.jpg


I picked out most of the glue, but you can see a line of it above the sticker and remains on the sweat barrier.

Some scrawling on the sweat

bd4445a0abae38f84448791260cd166b.jpg


Creased

d5426a7566290e989130e731afb07c24.jpg


And a head shot

bce15b6bb71f514a843bc4621de3943f.jpg


Everything about the hat is substantial. 5 1/2" crown, 2 5/8" brim. 185g weight. Thick leather sweat, heavyweight liner. OK, the ribbon is thin, but that's about it. The felt is dense and moldable, with a nice hand. I had to shim it down a little but hopefully it will conform down to my noggin with a little wear.
Date is a mystery. I'm going to say late 50's to early 60's, but as always input is welcomed!

Powered by happy thoughts
Great study of this rare hat. I love that liner. Impressive find.
 

Forum statistics

Threads
115,522
Messages
3,195,529
Members
59,162
Latest member
OJHymoid
Top